Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes~Under Car Trimming Required
- CURT 13105 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: No
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Toyota Sienna | V | 3300 | Rear | 6 Cyl 3.3L | 202 |
- Black; Performance Polyurethane
- Body Mount Set; Black; Performance Polyurethane;
- Body Mount Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
-
Features:
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break.Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track.Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota Tacoma |
- Red
- Body Mount Set; Red;
- Body Mount Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
-
Features:
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break.Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track.Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota 4Runner |
- Body mount - bushing
- Whiteline Body Mount Bushing Assembly.
- Body Mount Bushings Kit
- Whiteline's signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2005 - Toyota Tacoma | Front and Rear | United States | X-Runner |
- Black
- Body Mount Set; Black;
- Body Mount Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
-
Features:
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break.Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track.Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota 4Runner |
- 1 in.; Cast Iron; E-Coated; Non Tapered
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 1 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota Tacoma |
- 1 in.; Cast Iron; E-Coated; Non Tapered
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 1 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota Tacoma |
- 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- Made In The USA
- Fabricated Steel Blocks
- Powder Coated For A Long Life
- Angled For Pinion Correction
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota Tacoma |
- 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- Made In The USA
- Fabricated Steel Blocks
- Powder Coated For A Long Life
- Angled For Pinion Correction
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota Tacoma |
- 2 in.; Cast Iron; E-Coated; Tapered
- Lift Blocks; 2 in.; Cast Iron; E-Coated; Tapered;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 2 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Angled For Pinion Correction
- Lift Blocks; 2 in.; Cast Iron; E-Coated; Tapered
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota Tacoma |
Showing 1 - 10 of 106 products
Loading...