Shop By Product Matching "Body"
Image
Product
Price
- Class 3 Hitch; 2in. Receiver; Select Silverado; Sierra 1500 (Concealed Main Body
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 13301 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Chevrolet Silverado; GMC Sierra 1500
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 1500, LD, Limited and GMC Sierra 1500, LD, Limited (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Chevrolet Silverado 1500 | V | 5328 | Rear | 8 Cyl 5.3L | 325 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes~Under Car Trimming Required
- CURT 13105 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: No
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Toyota Sienna | L | 2672 | Rear | 4 Cyl 2.7L | 163 |
- Class 3 Hitch; 2in. Receiver; Select Subaru Legacy; Outback (Exposed Main Body)
- 4000lbs. Gross Trailer Weight; 600lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
- CURT 13390 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Subaru Legacy; Outback
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 4000
- Body Shape: Round
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 45 Minutes
- WC Tongue Weight: 600
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Legacy and Outback (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2013 - Subaru Outback | H | 2498 | Rear | 4 Cyl 2.5L | 2.5i Touring | 152 |
- Traildoors Rear, Pair
- 2007-2017 Wrangler Gen 3 Traildoors Rear Pair
- Body Armor 4X4 Door
- Product Attributes:
- Winch Y/N: N
- Light Fitment: N/a
- Fed-Ex: Y
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 - Long Label: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- Height: N/a
- Warning: None
- Drive: N/a
- D-Ring Mounts: N
- Category: Door Accessories
- Prop 65 - Warning: Warning - Both Cancer And Reproduction.tif
- Title: Body Armor 4x4 - Jk-6140 - Door
- USMCA Code: 870829
- Prop 65 (C, R or CR): Cr
-
Features:
- Gen 3 Body Armor Trail Doors
- Steel Tube and Plate Construction
- Dual Stage Locking Latch Mechanism
- Nylon Webbing With Padded Arm Rest Included
- Adjustable Hinges and Latch Plate For Easy Installation
- Anti-Rattle Bump Stops
- Two-Stage Powder Coat Light Texture Finish In Black
- Sold In Pairs
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 2013 - Jeep Wrangler | 4 |
- Traildoors Rear, Pair
- 2007-2017 Wrangler Gen 3 Traildoors Rear Pair
- Body Armor 4X4 Door
- Product Attributes:
- Winch Y/N: N
- Light Fitment: N/a
- Fed-Ex: Y
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 - Long Label: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- Height: N/a
- Warning: None
- Drive: N/a
- D-Ring Mounts: N
- Category: Door Accessories
- Prop 65 - Warning: Warning - Both Cancer And Reproduction.tif
- Title: Body Armor 4x4 - Jk-6140 - Door
- USMCA Code: 870829
- Prop 65 (C, R or CR): Cr
-
Features:
- Gen 3 Body Armor Trail Doors
- Steel Tube and Plate Construction
- Dual Stage Locking Latch Mechanism
- Nylon Webbing With Padded Arm Rest Included
- Adjustable Hinges and Latch Plate For Easy Installation
- Anti-Rattle Bump Stops
- Two-Stage Powder Coat Light Texture Finish In Black
- Sold In Pairs
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2013 - Jeep Wrangler | Sahara |
- Dodge Ram 1500 (New Body)(tailgate with OEM manual lock)
- Tailgate w/OEM Manual Lock
- Dodge Ram 1500 (New Body)(tailgate with OEM manual lock)
- Power Tailgate Lock
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Effortless Protection For Trucks Tailgate
- Locks Every Time Doors are Locked
- Mounts Inside Tailgate
- Ties Into Power Door Lock Remote
- No Drilling
- Includes Mounting Hardware/Instructions
- Integrated power locks secure your vehicle, with the ease of your truck's key fob. Great for trucks with a locking tonneau cover.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ram 3500 |
- Class 3 Hitch; 2in.; Select Hyundai Tucson; Kia Sportage (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 15 Minutes
- CURT 13066 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Hyundai Tucson; Kia Sportage
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 15 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Tucson and Kia Sportage (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2013 - Hyundai Tucson | L | 2359 | Rear | 4 Cyl 2.4L | GLS | - |
- Throttle Body Gasket
- FEL-PRO 61466 Throttle Body Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
12579933, 12608969, 12630862, 7T4Z 9E936A, AT4Z9E936A, CY01-13-655, G32198
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Edge | V | 3726 | 6 Cyl 3.7L | 227 |
- Hinge Steps, Pair
- 2007 Through 2020 Wrangler JK, JL, JT Hinge Steps - Pair
- Body Armor 4X4 Truck Bed Side Step
- Product Attributes:
- Winch Y/N: N/a
- Light Fitment: N/a
- Fed-Ex: Y
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 - Long Label: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- Height: N/a
- Warning: None
- Drive: N/a
- D-Ring Mounts: N/a
- Category: Accessories
- Prop 65 - Warning: Warning - Both Cancer And Reproduction.tif
- Title: Body Armor 4x4 - 5146 - Truck Bed Side Step
- USMCA Code: 870829
- Prop 65 (C, R or CR): Cr
-
Features:
- Fits 2007-2020 Model JK, JL and JT Wranglers
- Easy No-Drill Installation
- 1/8 Steel Plate, Two-Stage Light Texture Powder Coat
- 350 Lbs.. Load Limit
- Non-Slip Serrated Step Pad
- Included New Hardware and Rubber Pads To Protect Paint
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Wrangler |
- Hinge Steps, Pair
- 2007 Through 2020 Wrangler JK, JL, JT Hinge Steps - Pair
- Body Armor 4X4 Truck Bed Side Step
- Product Attributes:
- Winch Y/N: N/a
- Light Fitment: N/a
- Fed-Ex: Y
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 - Long Label: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- Height: N/a
- Warning: None
- Drive: N/a
- D-Ring Mounts: N/a
- Category: Accessories
- Prop 65 - Warning: Warning - Both Cancer And Reproduction.tif
- Title: Body Armor 4x4 - 5146 - Truck Bed Side Step
- USMCA Code: 870829
- Prop 65 (C, R or CR): Cr
-
Features:
- Fits 2007-2020 Model JK, JL and JT Wranglers
- Easy No-Drill Installation
- 1/8 Steel Plate, Two-Stage Light Texture Powder Coat
- 350 Lbs.. Load Limit
- Non-Slip Serrated Step Pad
- Included New Hardware and Rubber Pads To Protect Paint
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2013 - Jeep Wrangler | Sport |
Showing 1 - 10 of 821 products
Loading...