Image
Product
Price
- Class 3 Hitch; 2in. Receiver; Select Silverado; Sierra 1500 (Concealed Main Body
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 13301 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Chevrolet Silverado; GMC Sierra 1500
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WD Tongue Weight: 1000
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 1500, LD, Limited and GMC Sierra 1500, LD, Limited (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2018 - GMC Sierra 1500 | V | 5328 | Rear | 8 Cyl 5.3L | 325 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes~Under Car Trimming Required
- CURT 13105 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- WD Tongue Weight: 500
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2018 - Toyota Sienna | V | 3456 | Rear | 6 Cyl 3.5L | LE | - |
- Class 3 Hitch; 2in. Receiver; Select Subaru Legacy; Outback (Exposed Main Body)
- 4000lbs. Gross Trailer Weight; 600lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
- CURT 13390 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Subaru Legacy; Outback
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 4000
- Install Time: 45 Minutes
- WC Tongue Weight: 600
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Legacy and Outback (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Subaru Legacy | H | 2498 | Rear | 4 Cyl 2.5L | 152 |
- Class 3 Hitch; 2in.; Select Hyundai Tucson; Kia Sportage (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 15 Minutes
- CURT 13066 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Hyundai Tucson; Kia Sportage
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- Install Time: 15 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Tucson and Kia Sportage (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2018 - Hyundai Tucson | L | 2359 | Rear | 4 Cyl 2.4L | Sport | - |
- GM Body Mount Kit
- Green; 125 mm Bolt
- Product Attributes:
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: Bujes Superior E Inferior Y Perno
- Material:
- Caucho
- Élastomère
- Rubber
- Mounting Hardware Included:
-
Features:
- Direct replacement - this body mount fits and functions like the original equipment mount
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- Don't let worn body mounts ruin your vehicle's comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.
This Part Fits the Following OEM/Substitute Numbers:
15201791, 15201797
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Chevrolet Tahoe | Body Position 4 |
- GM Body Mount Kit
- Green; 125 mm Bolt
- Product Attributes:
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: Bujes Superior E Inferior Y Perno
- Material:
- Caucho
- Élastomère
- Rubber
- Mounting Hardware Included:
-
Features:
- Direct replacement - this body mount fits and functions like the original equipment mount
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- Don't let worn body mounts ruin your vehicle's comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Cadillac Escalade | Body Position 2 |
- Body Mount Kit
- Product Attributes:
- Bolt Grade: Regular
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Bolts Included:
- Oui
- Sí
- Yes
- Contenidos del paquete: 1 Kit De Montajes De Carrocería
- Bolt Length: 6.5
- Material:
- Acero
- Steel
-
Features:
- Direct replacement - this body mount fits and functions like the original equipment mount
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- Don't let worn body mounts ruin your vehicle's comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.
This Part Fits the Following OEM/Substitute Numbers:
22806716, 23248398
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - GMC Sierra 1500 | Body Position 2 |
- Fuel Injection Throttle Body Mounting Gasket
- FEL-PRO 61863 Fuel Injection Throttle Body Mounting Gasket for Acura RDX
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
16431-RTA-J01
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Honda Accord | L | 1996 | Lower | 4 Cyl 2.0L | 122 |
- w/Step Corners
- ECO-Series Rear Bumper; w/Step Corners;
- ECO-Series Rear Bumper
- Product Attributes:
- Bumper Style: Modular
-
Features:
- Rear Bumper
- Body Armor 4x4 was founded over ten years ago with the vision to provide high quality durable products for the Off Road community. Our products are engineered to stand up to abuse and be functional while enhancing the looks of the vehicle. We are committed to providing innovative products to the unique off road enthusiast. We are driven by our passion for the off road community.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Ram 1500 | Rear | ST |
- w/Dual Cube Light Pockets; 1/8 in. Steel Plate; Textured Black
- ECO-Series Rear Bumper; w/Dual Cube Light Pockets; 1/8 in. Steel Plate; Textured Black;
- ECO-Series Rear Bumper
- Product Attributes:
- Bumper Style: Custom
-
Features:
- Built In Step Pockets For Easy Bed Access
- OE Sensor Compatible
- Body Armor 4x4 was founded over ten years ago with the vision to provide high quality durable products for the Off Road community. Our products are engineered to stand up to abuse and be functional while enhancing the looks of the vehicle. We are committed to providing innovative products to the unique off road enthusiast. We are driven by our passion for the off road community.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ram 3500 | Rear |
Showing 1 - 10 of 742 products
Loading...