Shop By Product Matching "Body"
Choose a Model for your 2019 Toyota
Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes~Under Car Trimming Required
- CURT 13105 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: No
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2019 - Toyota Sienna | V | 3456 | Rear | 6 Cyl 3.5L | LE | - |
- Red
- Body Mount Set; Red;
- Body Mount Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
-
Features:
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break.Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track.Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Toyota 4Runner |
- Black
- Body Mount Set; Black;
- Body Mount Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
-
Features:
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break.Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track.Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Toyota 4Runner |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Toyota Land Cruiser |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Seal
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Toyota 86 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Toyota Tacoma | L | 2694 | 4 Cyl 2.7L | - |
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 2019 - Toyota Yaris | 1NZ-FE |
Additional Fitment Information:
| Vehicle | Fuel Type |
|---|---|
| 2019 - Toyota Tundra | FLEX |
- 3/16 in. Plate And 1/4 in. Winch Mount; 20 in. Dual Row LED
- HiLine Front Winch Bumper; 3/16 in. Plate And 1/4 in. Winch Mount; 20 in. Dual Row LED;
- HiLine Front Winch Bumper
- Product Attributes:
- Bumper Style: Winch Mount
-
Features:
- 3/16 in. Plate Bumper And 1/4 in. Winch Mount
- High Clearance Design That Accommodate Factory Trd Skid Plate
- Requires Trimming Of Factory Bumper
- Includes License Plate Bracket
- 10000 lbs Winch Capacity
- Fits Warn Zeon Winches
- Two-Stage Light Texture Finish In Black
- Light Fitment 20 in. Dual Row LED
- New All Steel Design 3/16 in. Steel Plate Construction Sub-Frame W in. Mount Plates Mount Directly To Frame Up To 10000 lbs Low Profile W in. Capacity Dual Process Black Powder Coat Finish Shackle Plates Tie Into Frame Rails 4 in Light Pockets For Additional Lights No Drill Installation
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Toyota Tacoma | Front |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Concealed Main Body)
- 3500lbs. Gross Trailer Weight; 525lbs. Tongue Weight Square Main Body~Underbody Panel Trimming May Be Required~No Drilling Required~Visibility: Concealed~Install Time 60 Minutes~Temporarily Lower Exhaust For Installation~Temporarily Remove Rear Fascia For Installation~Temporarily Remove Underbody Panel For Installation
- CURT 13343 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 60 Minutes
- WC Tongue Weight: 525
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/Cast
- Welded
- Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2019 - Toyota Sienna | V | 3456 | Rear | 6 Cyl 3.5L | XLE | - |
Showing 1 - 10 of 84 products
Loading...