Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes~Under Car Trimming Required
- CURT 13105 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- WD Tongue Weight: 500
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Toyota Sienna | V | 3456 | Rear | 6 Cyl 3.5L | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight
- CURT 13105 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- WD Tongue Weight: 500
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Toyota Sienna | V | 3456 | Rear | 6 Cyl 3.5L | - |
- Fuel Injection Throttle Body Mounting Gasket
- FEL-PRO 61863 Fuel Injection Throttle Body Mounting Gasket for Acura RDX
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
16431-RTA-J01
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Honda Accord | L | 1996 | Lower | 4 Cyl 2.0L | 122 |
- Various Locations; M12 X 1.5 X 110mm Flanged Hex Bolt
- Body Bolt; Various Locations; M12 X 1.5 X 110mm Flanged Hex Bolt;
- Body Bolt
-
Features:
- Body Bolt
- Crown Automotive carries over 9600 unique quality replacement parts encompassing over 766,000 different applications for every model of Jeep produced since 1941.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Jeep Wrangler |
- M12 X 1.75 X 70mm Flanged Hex Bolt
- Body Bolt; M12 X 1.75 X 70mm Flanged Hex Bolt;
- Body Bolt
-
Features:
- Body Bolt
- Crown Automotive carries over 9600 unique quality replacement parts encompassing over 766,000 different applications for every model of Jeep produced since 1941.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Dodge Durango |
- Body Mount Set
- Body Mount Set; Black;
- Black
- Product Attributes:
- Prop 65 Warning Label: P65.png
- Prop 65 (C, R or CR): Cr
-
Features:
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Toyota 4Runner |
- Direct Fit Chrome 4 Piece
- Direct Fit Chrome Plated 4 Piece Two 41 Inch Length X 1/4 Inch Thick X 1-1/8 Inch Height Pieces And Two 24-1/2 Inch Length X 1/4 Inch Thick X 1-1/8 Inch Height Pieces
- Side Molding
- Product Attributes:
- Installation Type: 3m Tape
- Drilling Required: No
-
Features:
- Chrome Plated For A Long Lasting Shine
- Designed To Fit Multiple Vehicles
- Easy Installation
- Limited Lifetime Warranty
- CCI proudly presents a new body side molding that fit multiple vehicles. This new body side molding, is made of quality ABS plastic with chrome finish that upgrades both vehicle and trim level appearance.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2020 - Ram 2500 | Crew Cab Pickup |
- w/Subframe Winch Mount; Textured Black
- Desert Series Front Bumper; w/Subframe Winch Mount; Textured Black;
- Desert Series Front Bumper
- Product Attributes:
- Bumper Style: Modular
-
Features:
- Two Piece Construction
- Tubular w/Sheet Metal Design
- Step Corners For Easy Bed Access
- Tail Corners Keep OE Vehicle Lines
- Body Armor 4x4 was founded over ten years ago with the vision to provide high quality durable products for the Off Road community. Our products are engineered to stand up to abuse and be functional while enhancing the looks of the vehicle. We are committed to providing innovative products to the unique off road enthusiast. We are driven by our passion for the off road community.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Toyota Tacoma | Front |
- Desert Series Front Winch Bumper
- 2016-2017 Tacoma Desert Series Front Bumper
- Body Armor 4X4 Bumper
- Product Attributes:
- Winch Y/N: Y
- Light Fitment: 18 In. Single Row Led And Led Cube Style Lights (30033 / 30034)
- D-Ring Mounts: Y
- Fed-Ex: N
- Category: Bumper
- Prop 65 - Warning: Warning - Both Cancer And Reproduction.tif
- Prop 65 - Long Label: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- USMCA Code: 87081
- Prop 65 (C, R or CR): Cr
-
Features:
- Light Fitment: Front 18" Single Row LED and 4 Cube Lights
- Two Piece Construction With Subframe Winch Mount
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - Toyota Tacoma | SR |
- Desert Series Front Winch Bumper
- 2016-2017 Tacoma Desert Series Front Bumper
- Body Armor 4X4 Bumper
- Product Attributes:
- Winch Y/N: Y
- Light Fitment: 18 In. Single Row Led And Led Cube Style Lights (30033 / 30034)
- D-Ring Mounts: Y
- Fed-Ex: N
- Category: Bumper
- Prop 65 - Warning: Warning - Both Cancer And Reproduction.tif
- Prop 65 - Long Label: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- USMCA Code: 87081
- Prop 65 (C, R or CR): Cr
-
Features:
- Light Fitment: Front 18" Single Row LED and 4 Cube Lights
- Two Piece Construction With Subframe Winch Mount
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - Toyota Tacoma | SR |
Showing 1 - 10 of 1166 products
Loading...