Shop By Product Matching "Body"
Choose a Model for your 2022 Jeep
Image
Product
Price
- Various Locations; M12 X 1.5 X 110mm Flanged Hex Bolt
- Body Bolt; Various Locations; M12 X 1.5 X 110mm Flanged Hex Bolt;
- Body Bolt
-
Features:
- Body Bolt
- Crown Automotive carries over 9600 unique quality replacement parts encompassing over 766,000 different applications for every model of Jeep produced since 1941.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Jeep Wrangler |
- M12 X 1.75 X 70mm Flanged Hex Bolt
- Body Bolt; M12 X 1.75 X 70mm Flanged Hex Bolt;
- Body Bolt
-
Features:
- Body Bolt
- Crown Automotive carries over 9600 unique quality replacement parts encompassing over 766,000 different applications for every model of Jeep produced since 1941.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Jeep Grand Cherokee WK |
- Direct Fit Chrome 4 Piece
- Direct Fit Chrome Plated 4 Piece Two 39 Inch Length X 1/4 Inch Thick X 1-1/4 To 3/4 Inch Tapered Height Pieces And Two 22 Inch Length X 1/4 Inch Thick X 1-1/4 Inch Height Pieces
- Side Molding
- Product Attributes:
- Installation Type: 3m Tape
- Drilling Required: No
-
Features:
- Designed To Fit Multiple Vehicles
- Chrome Plated For A Long Lasting Shine
- Constructed Of Durable Automotive-Grade ABS
- Quality Fitment
- Easy Installation
- Limited Lifetime Warranty
- CCI proudly presents a new body side molding that fit multiple vehicles. This new body side molding, is made of quality ABS plastic with chrome finish that upgrades both vehicle and trim level appearance.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Jeep Grand Cherokee WK |
- Various Locations; Steel
- Body Panel Retainer; Various Locations; Steel;
- Body Panel Retainer
-
Features:
- Body Panel Retainer
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Jeep Wagoneer |
- M10 x 1.0 Threads; M6x1.0 Hex Flange Lock
- Nut; M10 x 1.0 Threads; M6x1.0 Hex Flange Lock Nut;
- Nut
-
Features:
- Nut
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Jeep Grand Wagoneer |
- Front; Fender Flare; w/Switchback Led DRL; Satin Black
- Stealth Body Armor; Front; Fender Flare; w/Switchback Led DRL; Satin Black;
- Stealth Body Armor
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Bisphenol And Zinc Which Is Known To The State Of California To Cause Cancer; Birth Defects; Eye Damage; And Allergic Skin Conditions. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- 100 Percent Made In Texas USA
- Road Armor is the world's premier bumper manufacturer, dedicated to producing the ultimate in form, fit, and finish. We were the first to create a multifaceted steel bumper design and have led the industry since 2000. There are a lot of other manufacturers on the market these days, and we encourage you to learn the difference — The Road Armor difference — because not all replacement bumpers are created equal. There's no substitute for the Original Road Armor Bumpers, 100% Made in Texas, USA and backed by our Lifetime Guarantee.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Gladiator | Willys |
- Rear; Raw Stainless Steel
- Stealth Fender Liner Body Armor; Rear; Raw Stainless Steel;
- Stealth Fender Liner Body Armor
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Bisphenol And Zinc Which Is Known To The State Of California To Cause Cancer; Birth Defects; Eye Damage; And Allergic Skin Conditions. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Stealth Fender Liner Body Armor
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Gladiator | Overland |
- Electronic Throttle Body
- Product Attributes:
- Electrical Connection Type: Male
- Terminal Count: 6
- Throttle Body Finish: Natural
- Mounting Hardware Included:
- No
- Non
- Inlet Diameter: 2.97
- Outlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Throttle Body Material:
- Aluminio
- Aluminum
- Venturi Quantity: 0
- Adjustable:
- No
- Non
- Connector/Terminal Type: Pin
- Fuel System Type: Gas
- Bore Diameter: 2.97
- Outlet Diameter: 2.95
- Throttle Position Sensor Included:
- Oui
- Sí
- Yes
- Idle Air Control Motor Included:
- No
- Non
- Installation Hardware Included:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Fuel Injectors Included:
- No
- Non
- Housing Color: Natural
- Inlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Throttle Body Mounted:
- No
- Non
- Tipo de conexión eléctrica: Macho
- Throttle Body Type:
- Electronic
- Electrónico
- Contenidos del paquete:
- 1 Cuerpo Del Acelerador
- 1 Junta
- Tipo de terminal/conector: Clavija
- Throttle Body Spacer Included:
- No
- Non
-
Features:
- Upgraded design - this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction - 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested - complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality - vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
- Original equipment throttle bodies often fail from moisture and oil intrusion and failed internal electronics. This Dorman OE FIX throttle body features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.
This Part Fits the Following OEM/Substitute Numbers:
5184349AB, 5184349AC, 5184349AD, 5184349AE, 5184349AF, 67-7012, 6E7012, NTB1066, RTB1066, S20203, TB1163
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - Jeep Grand Cherokee | V | 3604 | 6 Cyl 3.6L | 220 |
- Class 3 Hitch; 2in. Receiver; Select Jeep Cherokee KL (Concealed Main Body)
- 4500lbs. Gross Trailer Weight; 675lbs. Tongue Weight; 5500lbs. Weight Distributing; 750lbs. Weight Disturbing Tongue Weight; Includes Hardware
- CURT 13395 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Jeep Cherokee KL
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4500
- Body Shape: Square
- WD Tongue Weight: 750
- Install Time: 35 Minutes
- WC Tongue Weight: 675
- Weight Distribution: 5500
- Receiver Tube Size: 2.000 In.
-
Features:
- Rated To 4500 Lbs. Gross Trailer Weight
- 675 Lbs. Tongue Weight
- Made With A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance With Sea J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened With A Cast Welded Seamless Collar
- Equipped With An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee KL (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,500 lbs. GTW and 675 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Jeep Cherokee | Rear |
- w/Step; Black; Pair
- Body Side 3 in. Round Step Bar Wheel -To- Wheel; w/Step; Black; Pair;
- Body Side 3 in. Round Step Bar Wheel -To- Wheel
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Bends And Brackets Designed For Custom Fit
- Compressed Flat Step To Enhance Strength
- Step Design Eliminates Rust
- Step Pads Secure With Insert Pins
- No Drill Installation
- Traditional style 3-inch tubular step bar for ease of entry from a great looking side bar. Available in a bright polished 304 stainless steel for a custom show finish or dual stage E-Coat with durable gloss black Powder Coat for the rugged off road look. Each bar is fitted with a reinforced no slip polyester step pad precisely positioned for vehicle entry and exit. Heavy Duty 3-inch x .07 wall steel tubing.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Sahara High Altitude |
Showing 1 - 10 of 59 products
Loading...