Shop By Product Matching "Brake"
Choose a Model for your 1984 Ford
Image
Product
Price
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
- Product Attributes:
- Wires: 3
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Ford Ranger |
- Raybestos Element 3
- Product Attributes:
- Fitting Type, End 2: Female Thread - Sae
- Gasket Or Seal Included: No
- Fitting Type, End 1: Block - Sae
- Hose Length, Overall: 20.000
This Part Fits the Following OEM/Substitute Numbers:
150.65326, 22.3886, 87-42326, BH177189, BH2337, E-10512, E8UZ2282A, F119385, H36850, HB85326, R4510512, SP8580
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1984 - Ford E-150 Econoline | Rear Center |
- DOT3 Brake Fluid 6/12 OZ
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Ford Mustang | V | - | 6 Cyl 3.8L | 232 |
- DOT3 Brake Fluid 6/12 OZ
- Brake Fluid; DOT 3; 12 Fluid Ounce; Synthetic
- Product Attributes:
- Flash Point:
- 101.7
- 215
- 397
- Minimum Dry Boiling Point:
- 232
- 450
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 140
- 284
- 291
- Color: Amber
- Volume: 0.355
- Composition: Synthetic
- Container Type: Plastic Container
- Fluid Composition: Synthetic
- Boiling Point: 401
- Type: Dot 3
- Flash Point:
-
Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
- Prestone® Hi-Temp Synthetic DOT 3 Brake Fluid provides longer fluid life. Prestone lasts longer and provides a higher margin of safety because of its high temperature synthetic formula. With a minimum 460°F Dry Boiling Point, it provides 59°F more protection than minimum DOT 3 requirements. Prestone DOT 3 provides corrosion protection for ALL metals within the braking system and is suitable for disk, drum, and ABS brakes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Ford Escort | L | 1989 | 4 Cyl 2.0L | 122 |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 15.13
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.38 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1984 - Ford F-350 | Front Left | RWD |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 15.13
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.38 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1984 - Ford F-350 | Front Right | RWD |
- Brake Hydraulic Hose
- 2 Piston Caliper
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 15.13
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.38 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.65031, 18J141, 2201073, 350-54263, 4536951, 610077, 77235, 87-42031, 87-85031, B916333, BH103302, BH177235, BH36951, E0TZ2078D, F103302, HB-85031, NF4036
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1984 - Ford F-250 | Front Left | RWD |
- Brake Hydraulic Hose
- 2 Piston Caliper
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 15.13
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.38 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1984 - Ford F-250 | Front Right | RWD |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- Oui
- Sí
- Yes
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 15.25
- Outer Sleeve Material: Pvc
- Contenidos del paquete: 1 Manguera De Freno, Empaques
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 0.38 In
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.65033, 18J164, 18J2019, 2201012, 350-54265, 4536984, 610075, 77249, 87-42033, 87-85033, B916358, BH103200, BH177249, BH36984, E0TZ2078B, F103200, HB-85033, NF4034...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1984 - Ford F-150 | Front Right |
- Roll/Control® Install Kit
- Includes Brake Lines/Brass Fittings/Connectors/Adapters/Unions/Plugs
- Roll/Control® Install Kit; Includes Brake Lines/Brass Fittings/Connectors/Adapters/Unions/Plugs;
- Roll/Control(R) Install Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Brake Lines
- Various Brass Fittings
- Includes Connectors
- Includes Adapters
- 90 Day Limited Warranty
- The Roll/Control Installation Kit is designed to be used in conjunction with most brake holding devices on American made vehicles. This kit contains brake lines and various brass fittings, connectors, adapters, unions and plugs necessary for an easy installation.
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Ford Mustang |
Showing 1 - 10 of 305 products
Loading...