Image
Product
Price
- For FMSI Pad No. D897; Vented; 5 Bolt Holes; 336mm Dia.; 67mm Height; 28mm Thick; 78.5mm Center Hole Dia.
- Ultimax OE Style Disc Kit; Front; For FMSI Pad No. D897; Vented; 5 Bolt Holes; 336mm Dia.; 67mm Height; 28mm Thick; 78.5mm Center Hole Dia.;
- Ultimax OE Style Disc Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Ultimax OE Style Disc Kit
- EBC Ultimax Slotted Rotors offer you the performance of slotted rotors but without the air noise that is normally associated with slotted rotors. The progressively angled slots on the EBC Ultimax Slotted Brake Rotors offer quiet brake operation without that excessive air noise, while still allowing the slots to help keep your brakes cool. The angled slots pull in cool air for cooler brake operation which helps your brakes perform at their best. The slots also help to clear any excess dust and debris to help keep pad grip to a maximum while also increasing pad longevity.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Ram 1500 | Front | SXT |
- Autospecialty By PowerStop Replacement Brake Caliper
- DIRECT REPLACEMENT CALIPER
- Autospecialty by PowerStop - Front Right Stock Replacement Brake Caliper
- Product Attributes:
- Piston Diameter: 59.94
- Anti-Rattle Spring Included: No
- Grade Type: Regular
- Mounting Hardware Included: No
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10.0
- Mounting Hole Thread Diameter: 2.0
- Caliper Slides Included: Yes
- Bleeder Screw Thread Pitch: 1.0
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Bleeder Screw Quantity: 1
- Integrated Parking Brake: No
- Caliper Finish: Uncoated
- Inlet Thread Diameter: 10.0
- Piston Material: Phenolic
- Mounting Bolt Included: No
- Mounting Hole Diameter: 16.0
- Disc Brake Caliper Casting Material: Cast Iron
- Pads Included: No
- Abutment Clips Included: Yes
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.0
- Piston Quantity: 2
- Caliper Type: Floating
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- High temperature EPDM rubber dust boots
- New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad attachment hardware and mounting brackets.
- Premium lubricant is used to ensure a smooth caliper operation and durability in the harshest conditions.
- Bolt on ready, no modifications necessary
- 100% Pressure tested and inspected for high quality brake performance.
- Autospecialty by PowerStop Brake Calipers (sold individually) are perfect for the DIY and professional installers and bolt on directly in place of the original stock caliper. PowerStop Brake Calipers and brackets are manufactured and engineered to provide the best performance and meet the highest quality standards. Autospecialty by PowerStop Brake Calipers are expertly assembled using new seals, guide pins, dust boots, bleeder screws, and stainless-steel abutment hardware clips. High temperature EPDM rubber dust boots and premium assembly lubricants are used to ensure a smooth caliper operation and durability in the harshest conditions. PowerStop calipers are 100% pressure tested and inspected to guarantee a reliable, high quality brake performance. Autospecialty by PowerStop Brake Calipers deliver a reliable, hassle-free, and durable brake caliper replacement solution for the value-minded consumer!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ram 3500 | Front Right |
- Autospecialty By PowerStop Replacement Brake Caliper
- DIRECT REPLACEMENT CALIPER
- Autospecialty by PowerStop - Rear Right Stock Replacement Brake Caliper
- Product Attributes:
- Piston Diameter: 44.96
- Anti-Rattle Spring Included: No
- Grade Type: Regular
- Mounting Hardware Included: No
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10.0
- Mounting Hole Thread Diameter: 2.0
- Caliper Slides Included: Yes
- Bleeder Screw Thread Pitch: 1.0
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Bleeder Screw Quantity: 1
- Integrated Parking Brake: No
- Caliper Finish: Uncoated
- Inlet Thread Diameter: 10.0
- Piston Material: Phenolic
- Mounting Bolt Included: No
- Mounting Hole Diameter: 16.0
- Disc Brake Caliper Casting Material: Cast Iron
- Pads Included: No
- Abutment Clips Included: Yes
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.0
- Piston Quantity: 2
- Caliper Type: Floating
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- 100% Pressure tested and inspected for high quality brake performance.
- High temperature EPDM rubber dust boots
- New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad attachment hardware and mounting brackets.
- Premium lubricant is used to ensure a smooth caliper operation and durability in the harshest conditions.
- Bolt on ready, no modifications necessary
- Autospecialty by PowerStop Brake Calipers (sold individually) are perfect for the DIY and professional installers and bolt on directly in place of the original stock caliper. PowerStop Brake Calipers and brackets are manufactured and engineered to provide the best performance and meet the highest quality standards. Autospecialty by PowerStop Brake Calipers are expertly assembled using new seals, guide pins, dust boots, bleeder screws, and stainless-steel abutment hardware clips. High temperature EPDM rubber dust boots and premium assembly lubricants are used to ensure a smooth caliper operation and durability in the harshest conditions. PowerStop calipers are 100% pressure tested and inspected to guarantee a reliable, high quality brake performance. Autospecialty by PowerStop Brake Calipers deliver a reliable, hassle-free, and durable brake caliper replacement solution for the value-minded consumer!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ram 2500 | Rear Right |
- Autospecialty By PowerStop Replacement Brake Caliper
- with Single Rear Wheels (SRW)
- DIRECT REPLACEMENT CALIPER
- Autospecialty by PowerStop - Rear Right Stock Replacement Brake Caliper
- Product Attributes:
- Piston Diameter: 44.96
- Anti-Rattle Spring Included: No
- Grade Type: Regular
- Mounting Hardware Included: No
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10.0
- Mounting Hole Thread Diameter: 2.0
- Caliper Slides Included: Yes
- Bleeder Screw Thread Pitch: 1.0
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Bleeder Screw Quantity: 1
- Integrated Parking Brake: No
- Caliper Finish: Uncoated
- Inlet Thread Diameter: 10.0
- Piston Material: Phenolic
- Mounting Bolt Included: No
- Mounting Hole Diameter: 16.0
- Disc Brake Caliper Casting Material: Cast Iron
- Pads Included: No
- Abutment Clips Included: Yes
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.0
- Piston Quantity: 2
- Caliper Type: Floating
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- 100% Pressure tested and inspected for high quality brake performance.
- High temperature EPDM rubber dust boots
- New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad attachment hardware and mounting brackets.
- Premium lubricant is used to ensure a smooth caliper operation and durability in the harshest conditions.
- Bolt on ready, no modifications necessary
- Autospecialty by PowerStop Brake Calipers (sold individually) are perfect for the DIY and professional installers and bolt on directly in place of the original stock caliper. PowerStop Brake Calipers and brackets are manufactured and engineered to provide the best performance and meet the highest quality standards. Autospecialty by PowerStop Brake Calipers are expertly assembled using new seals, guide pins, dust boots, bleeder screws, and stainless-steel abutment hardware clips. High temperature EPDM rubber dust boots and premium assembly lubricants are used to ensure a smooth caliper operation and durability in the harshest conditions. PowerStop calipers are 100% pressure tested and inspected to guarantee a reliable, high quality brake performance. Autospecialty by PowerStop Brake Calipers deliver a reliable, hassle-free, and durable brake caliper replacement solution for the value-minded consumer!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ram 3500 | Rear Right |
- Brake-Force™ Electronic Brake Control
- Time Based Actuation; 2-4 Trailer Brakes; Short Proof; Lifetime Warranty
- Brake-Force™ Electronic Brake Control; Time Based Actuation; 2-4 Trailer Brakes; Short Proof; Lifetime Warranty;
- Brake-Force(TM) Electronic Brake Control
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
-
Features:
- Smart LED Display Shows Trailer Connection
- Braking Function/Short Circuit Notification
- Changes Green To Yellow As Power Increases
- Plug In Simple Feature
- Intuitive Vertical Manual Slide
- Short Proof Protected
- Controls Up To 4 Trailer Brakes
- Limited Lifetime Warranty
- The 47225 brake control utilizes time based actuation for applying braking power to the trailer brakes. An LED indicator will glow displaying braking intensity. The brighter the glow, the more braking force is being applied to the trailer brakes. Most states and provinces require a trailer brake controller based on the weight of the trailer.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ram 2500 |
- Includes 8 Springs Rear
- Brake Pad Spring Kit; Rear; Includes 8 Springs;
- Brake Pad Spring Kit
-
Features:
- Brake Pad Spring Kit
- Crown Automotive carries over 9600 unique quality replacement parts encompassing over 766,000 different applications for every model of Jeep produced since 1941.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ram 1500 | Rear |
- Brake Pedal Pad;
- Brake Pedal Pad
-
Features:
- Brake Pedal Pad
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Transmission |
|---|---|
| 2011 - Ram 3500 | Automatic |
- Brake Hose Washer;
- Brake Hose Washer
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Brake Hose Washer
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ram 3500 |
- Drum Brake Adjuster Cover
- Brake Adjuster Plug; Drum Brake Adjuster Cover;
- Brake Adjuster Plug
-
Features:
- Brake Adjuster Plug
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Ram Dakota | ST |
- Vented Rotor; 14.17 in. Dia.; 4.02 in. Height
- Talon Slotted Brake Rotors; Front; Vented Rotor; 14.17 in. Dia.; 4.02 in. Height;
- Talon Slotted Brake Rotors
- Product Attributes:
- Position: Front
- WARNING CA Proposition 65: No
-
Features:
- Engineered Machined Finished
- Coated In ISO Certified Facilities In North America
- G3000 Metallurgy Superior Automotive Casting Material
- Validated Design And Performance Through Extensive Testing
- All Rotors Are Balanced w/CNC Programmed
- Precision Milled Slots
- Significantly Reduce Harmonic Resonance Issues
- Maintain A Clean Pad Surface And Expel Away Debris
- Salt Spray Tested Per ISO-9227 Exceeding The 240 hrs. Requirement
- Proven Cross Drilled Designs To Optimize Thermal Efficiency
- Heat Dissipation/Strength And Improve Wet Braking
- Magni™ Coating Barrier Applied
- Decades of experience, continuous research and development, and dedication to bringing the highest quality premium friction products have led to Talon(R) Rotors. Leveraging the high quality performance of Hawk Performances(R) unique and proprietary DTC curved slot design, they are built to OE specifications, weights, and production processes, and are engineered to fit a vehicles current braking system without modification.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ram 3500 | Front |
Showing 1 - 10 of 768 products
Loading...