Image
Product
Price
- FMSI Pad No. D888; Vented; 5 Bolt Holes; 320mm Dia.; 49mm Height; 28mm Thick; 68mm Center Hole Dia.
- S4 Kits Redstuff and USR Rotor; Front; FMSI Pad No. D888; Vented; 5 Bolt Holes; 320mm Dia.; 49mm Height; 28mm Thick; 68mm Center Hole Dia.;
- S4 Kits Redstuff and USR Rotor
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Muscle Car/Premium Import Upgrade Kit
- For Spirited Highway Driving
- Lowest Dusting Pads In EBCs Range
- Fine Slotted G3000 Sports Rotors
- Geomet Anti Rust Coating
- Direct Fit
- No Changes Required Over Stock Set Up
- 10
- 000 Mile No Hassle Warranty
- Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors pads rotors and caliper lube. If you drive a muscle car or premium import and require better brakes at any speed with LESS DUST this is your Kit choice. High efficiency EBC Pads built with Aramid fiber enhanced with Ceramic granules to further enhance braking,fully shimmed,slotted and chamfered and featuring the patented EBC Brake-in coating for fast pad seating after install deliver great braking power with zero brake fade. Kit includes the EBC fine slotted vented sport rotors for silent braking and cooler brakes and guaranteed flat and parallel pad wear finished with Geomet black anti rust coating.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - INFINITI M37 | Front |
- FMSI Pad No. D1347; Vented; 350mm Dia.; 62mm Height; 20mm Thick; 68mm Center Hole Dia.; Pad Dimensions: 100 x 60 x 14mm Sport Pkg
- Bluestuff NDX Full Race Brake Pads; FMSI Pad No. D1347; Vented; 350mm Dia.; 62mm Height; 20mm Thick; 68mm Center Hole Dia.; Pad Dimensions: 100 x 60 x 14mm;
- Bluestuff NDX Full Race Brake Pads
- Product Attributes:
- WARNING CA Proposition 65: No
- Caliper Type: Oem
-
Features:
- Worlds First Street And True Track Pad
- Chemical Interlayer Pad For Super Strong Pad Bond
- Easy On Rotors
- Surfaces Are Left Smooth And Not Scored
- Low Heat Transfer
- Great Release
- Deep V Grooves Catches Dirt Dust/Improves Venting
- Huge Lifetime Almost Double Previous EBC Products
- Bluestuff NDX is a high friction sport and race material that can be used for aggressive street driving and certain types of track use. The material has had much success on the track with quality aftermarket calipers (Multi piston systems with better release and cooling and larger rotors) and limited success with street based calipers where pad size and caliper drag can challenge any brake material. The biggest advantage of EBC Bluestuff NDX is their bite from cold and progressive brake feel and the ability to bring a car to a complete stop. This has led to the ECE R90 brake safety regulation approval of R90 which is now completed and certificates are being obtained (during July 2011). There are certain older street based caliper systems where even the new Bluestuff will have trouble handling the caliper and slider drag inherent in the systems but this scenario is exactly the same for our competitors. There is NO material that will be PERFECT on the track in all older street based caliper systems.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - INFINITI M56 | Rear |
- FMSI Pad No. D1347; Vented; 350mm Dia.; 62mm Height; 20mm Thick; 68mm Center Hole Dia.; Pad Dimensions: 100 x 60 x 14mm
- Bluestuff NDX Full Race Brake Pads; FMSI Pad No. D1347; Vented; 350mm Dia.; 62mm Height; 20mm Thick; 68mm Center Hole Dia.; Pad Dimensions: 100 x 60 x 14mm;
- Bluestuff NDX Full Race Brake Pads
- Product Attributes:
- WARNING CA Proposition 65: No
- Caliper Type: Oem
-
Features:
- Worlds First Street And True Track Pad
- Chemical Interlayer Pad For Super Strong Pad Bond
- Easy On Rotors
- Surfaces Are Left Smooth And Not Scored
- Low Heat Transfer
- Great Release
- Deep V Grooves Catches Dirt Dust/Improves Venting
- Huge Lifetime Almost Double Previous EBC Products
- Bluestuff NDX is a high friction sport and race material that can be used for aggressive street driving and certain types of track use. The material has had much success on the track with quality aftermarket calipers (Multi piston systems with better release and cooling and larger rotors) and limited success with street based calipers where pad size and caliper drag can challenge any brake material. The biggest advantage of EBC Bluestuff NDX is their bite from cold and progressive brake feel and the ability to bring a car to a complete stop. This has led to the ECE R90 brake safety regulation approval of R90 which is now completed and certificates are being obtained (during July 2011). There are certain older street based caliper systems where even the new Bluestuff will have trouble handling the caliper and slider drag inherent in the systems but this scenario is exactly the same for our competitors. There is NO material that will be PERFECT on the track in all older street based caliper systems.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - INFINITI G37 | Rear | Base |
- Raybestos R-Line
This Part Fits the Following OEM/Substitute Numbers:
16124, 30016124A, H8236, HW16124, HW16129
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - INFINITI QX56 | Front |
- Impulse™ Electronic Brake Control
- Time Based Actuation; Digital Display; 2-6 Trailer Brakes; Short Proof; Electric Over Hydraulic Compatible; Lifetime Warranty
- Impulse™ Electronic Brake Control; Time Based Actuation; Digital Display; 2-6 Trailer Brakes; Short Proof; Electric Over Hydraulic Compatible; Lifetime Warranty;
- Impulse(TM) Electronic Brake Control
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
-
Features:
- Time-Based Braking
- Mounts At Any Angle
- Percentage Of Braking Power Shown
- Plug In Simple Feature
- Intuitive Vertical Manual Slide
- Short Proof Protected
- Controls Up To 6 Trailer Brakes
- Limited Lifetime Warranty
- The 47235 brake control utilizes time based actuation for applying braking power to the trailer brakes. The built-in digital display makes it easy for setting braking intensity. The braking force to the trailer can easily be adjusted from 5% to 99% for setting the exact percentage of brake power desired. Most states and provinces require a trailer brake controller based on the weight of the trailer.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - INFINITI QX56 |
- Brake Hydraulic Hose
- From 2/12
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 1 Flare Type:
- Inverted
- Invertido
- Bracket Included:
- No
- Non
- End 2 Fitting Inside Diameter:
- M10 X 1,0
- M10 X 1.0
- Color:
- Black
- Negro
- Noir
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Longitud total 2 (in): 12.25 In
- Describe Type: Flexible Hose
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- End 2 Flare Type:
- Inverted
- Invertido
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: M10 X 1.0
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Female
- Hembra
- Total Length 2 (In): 12.25 In
- End 2 Fitting Type:
- Female
- Hembra
- Axis 1 Length: 10.13
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- End 2 Thread Size: M10 X 1.0
- DOT Approved:
- Oui
- Sí
- Yes
- Axis 2 Length: 11.25
- End 1 Thread Size: M10 X 1.0
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.42092, 2206201, 350-68045, 462111MA4A, BH145047, BH383473, BH383687, F145047
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2012 - INFINITI M56 | Front Left Inner | RWD |
- Trailer Brake Controller Harness; Select Nissan; Infiniti
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug Install Time 5 Minutes
- CURT 51382 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Nissan Armada; Frontier; NV; Pathfinder; Titan; XD; Xterra; Infiniti
- Brake Control Adapter Harness
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Nissan Armada, Frontier, NV1500, NV200, NV2500, NV3500, Pathfinder, Titan, Titan XD, Xterra, Infiniti QX56, QX60 and QX80 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - INFINITI QX56 |
- without Sport Package
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Surface Finish: Coated
- Caliper Bracket Mounting Hole Size: M12
- Manufacturing Type: Reman
- Friction Material: Semi-metallic
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1.00
- Caliper Bracket Mounting Hole Thread Pitch: 1.25
- Caliper Piston Diameter B: Na
- Casting Number 1: 4319
- Piston Quantity: 1
- Caliper Piston Diameter A: Na
- Caliper Type: Floating
- Caliper Configuration: Loaded
- Caliper Piston Diameter:
- 1.780
- 45.212
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - INFINITI M37 | Rear Left |
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Surface Finish: Coated
- Caliper Bracket Mounting Hole Size: M12
- Manufacturing Type: Reman
- Friction Material: Semi-metallic
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1.00
- Caliper Bracket Mounting Hole Thread Pitch: 1.25
- Caliper Piston Diameter B: Na
- Casting Number 1: 4319
- Piston Quantity: 1
- Caliper Piston Diameter A: Na
- Caliper Type: Floating
- Caliper Configuration: Loaded
- Caliper Piston Diameter:
- 1.780
- 45.212
This Part Fits the Following OEM/Substitute Numbers:
141.42594, 142.42594, 19-6183, 19-B6036, 19-P3738, 19-P6036, 19-P6183, 331-67669, 440111AA0A, 99-00640A, 9900640A, SC4343-1, SE6587A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - INFINITI G25 | Rear Left |
- without Sport Package
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Surface Finish: Coated
- Caliper Bracket Mounting Hole Size: M12
- Manufacturing Type: Reman
- Friction Material: Semi-metallic
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1.00
- Caliper Bracket Mounting Hole Thread Pitch: 1.25
- Caliper Piston Diameter B: Na
- Casting Number 1: 4319
- Piston Quantity: 1
- Caliper Piston Diameter A: Na
- Caliper Type: Floating
- Caliper Configuration: Loaded
- Caliper Piston Diameter:
- 1.780
- 45.212
This Part Fits the Following OEM/Substitute Numbers:
141.42593, 142.42593, 19-6182, 19-B6037, 19-P3739, 19-P6037, 19-P6182, 331-67668, 440011AA0A, 99-00640B, 9900640B, SC4344-1, SE6588A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - INFINITI G37 | Rear Right |
Showing 1 - 10 of 1473 products
Loading...