Image
Product
Price
- FMSI Pad No. D888; Vented; 5 Bolt Holes; 320mm Dia.; 49mm Height; 28mm Thick; 68mm Center Hole Dia.
- S4 Kits Redstuff and USR Rotor; Front; FMSI Pad No. D888; Vented; 5 Bolt Holes; 320mm Dia.; 49mm Height; 28mm Thick; 68mm Center Hole Dia.;
- S4 Kits Redstuff and USR Rotor
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Muscle Car/Premium Import Upgrade Kit
- For Spirited Highway Driving
- Lowest Dusting Pads In EBCs Range
- Fine Slotted G3000 Sports Rotors
- Geomet Anti Rust Coating
- Direct Fit
- No Changes Required Over Stock Set Up
- 10
- 000 Mile No Hassle Warranty
- Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors pads rotors and caliper lube. If you drive a muscle car or premium import and require better brakes at any speed with LESS DUST this is your Kit choice. High efficiency EBC Pads built with Aramid fiber enhanced with Ceramic granules to further enhance braking,fully shimmed,slotted and chamfered and featuring the patented EBC Brake-in coating for fast pad seating after install deliver great braking power with zero brake fade. Kit includes the EBC fine slotted vented sport rotors for silent braking and cooler brakes and guaranteed flat and parallel pad wear finished with Geomet black anti rust coating.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Nissan 370Z | Front |
- FMSI Pad No. D1347; Vented; 350mm Dia.; 62mm Height; 20mm Thick; 68mm Center Hole Dia.; Pad Dimensions: 100 x 60 x 14mm Sport Pkg
- Bluestuff NDX Full Race Brake Pads; FMSI Pad No. D1347; Vented; 350mm Dia.; 62mm Height; 20mm Thick; 68mm Center Hole Dia.; Pad Dimensions: 100 x 60 x 14mm;
- Bluestuff NDX Full Race Brake Pads
- Product Attributes:
- WARNING CA Proposition 65: No
- Caliper Type: Oem
-
Features:
- Worlds First Street And True Track Pad
- Chemical Interlayer Pad For Super Strong Pad Bond
- Easy On Rotors
- Surfaces Are Left Smooth And Not Scored
- Low Heat Transfer
- Great Release
- Deep V Grooves Catches Dirt Dust/Improves Venting
- Huge Lifetime Almost Double Previous EBC Products
- Bluestuff NDX is a high friction sport and race material that can be used for aggressive street driving and certain types of track use. The material has had much success on the track with quality aftermarket calipers (Multi piston systems with better release and cooling and larger rotors) and limited success with street based calipers where pad size and caliper drag can challenge any brake material. The biggest advantage of EBC Bluestuff NDX is their bite from cold and progressive brake feel and the ability to bring a car to a complete stop. This has led to the ECE R90 brake safety regulation approval of R90 which is now completed and certificates are being obtained (during July 2011). There are certain older street based caliper systems where even the new Bluestuff will have trouble handling the caliper and slider drag inherent in the systems but this scenario is exactly the same for our competitors. There is NO material that will be PERFECT on the track in all older street based caliper systems.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Nissan 370Z | Rear |
- StopTech Sport Slotted Brake Rotor; Rear Right
- Solid Rear Disc
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal. Especially effective with higher friction; European style brake pad compounds. Slotted for increased bite; improved looks and better performance
- StopTech Sport Slotted Disc Brake Rotors
-
Features:
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal. Especially effective with higher friction
- European style brake pad compounds. Slotted for increased bite
- improved looks and better performance
- StopTech Slotted Sport Rotors are 1-piece direct replacement brake discs for factory brake systems and stock calipers that look great behind your wheels and offer significantly improved braking performance. The unique slotting aids with heat and brake dust dispersal; prevents glazing of the pads; adds bite and improves wet and dry braking performance. Built to last; the black e-coating provides protection from corrosion and the high carbon metallurgy (in most applications) offers quieter operation; better crack resistance and increased performance.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Nissan Armada | Rear Right |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- End 2 Flare Type:
- Inverted
- Invertido
- Thread Pitch:
- 1
- 1 Mm
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type: Banjo
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 16.38
- Contenidos del paquete:
- 1 Manguera Del Freno
- 2 Arandelas
- DOT Approved:
- Oui
- Sí
- Yes
- End 2 Thread Size: M10 X 1.0
- Describe Type: Flexible Hose
- End 1 Thread Size: 10 Mm
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
2207825, 46210EZ56A
Additional Fitment Information:
| Vehicle | Position | Wheel FeedBase |
|---|---|---|
| 2017 - Nissan TITAN XD | Rear Left | 151.6 |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 1 Flare Type:
- Inverted
- Invertido
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- End 2 Flare Type:
- Inverted
- Invertido
- Thread Pitch:
- 1
- 1 Mm
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Female
- Hembra
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type: Junction
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 20.34
- Contenidos del paquete:
- 1 Manguera Del Freno
- 2 Arandelas
- DOT Approved:
- Oui
- Sí
- Yes
- End 2 Thread Size: M10 X 1.0
- Describe Type: Flexible Hose
- End 1 Thread Size: M10 X 1.0
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
46210EZ55A, 46210EZ55C
Additional Fitment Information:
| Vehicle | Position | Wheel FeedBase |
|---|---|---|
| 2017 - Nissan TITAN XD | Rear Right | 151.6 |
- Raybestos R-Line
This Part Fits the Following OEM/Substitute Numbers:
16124, 30016124A, H8236, HW16124, HW16129
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Nissan TITAN | Front |
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Mounting Hole Size: 12.000
- Caliper Bracket Mounting Hole Thread Pitch: 1.250
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1
- Caliper Type: Floating
- Caliper Piston Diameter:
- 1.37
- 34.8
This Part Fits the Following OEM/Substitute Numbers:
10-04459-1, 19-B6640, 440111KD0A, SC4387
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Nissan Juke | Rear Left | S |
- To 06/2016
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Mounting Hole Size: 12.000
- Caliper Bracket Mounting Hole Thread Pitch: 1.250
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1
- Caliper Type: Floating
- Caliper Piston Diameter:
- 1.37
- 34.8
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Nissan Sentra | Rear Left | Nismo |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 1 Flare Type:
- Inverted
- Invertido
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- End 2 Flare Type:
- Inverted
- Invertido
- Thread Pitch:
- 1
- 1 Mm
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type: Junction
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Axis 1 Length: 17.5
- Contenidos del paquete:
- 1 Manguera Del Freno
- 2 Arandelas
- DOT Approved:
- Oui
- Sí
- Yes
- End 2 Thread Size: M10 X 1.0
- Describe Type: Flexible Hose
- End 1 Thread Size: 10 Mm
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.42439, 2207379, 350-68093, 46210EZ05B, 46210EZ05C
Additional Fitment Information:
| Vehicle | Position | Wheel FeedBase |
|---|---|---|
| 2017 - Nissan TITAN XD | Rear Right | 139.8 |
- Raybestos R-Line
- Product Attributes:
- Caliper Bracket Mounting Hole Size: 12.000
- Caliper Bracket Mounting Hole Thread Pitch: 1.250
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1
- Caliper Type: Floating
- Caliper Piston Diameter:
- 1.37
- 34.8
This Part Fits the Following OEM/Substitute Numbers:
10-04460-1, 19-B3583, 440011KD0A, SC4388
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Nissan Juke | Rear Right | S |
Showing 1 - 10 of 3137 products
Loading...