Shop By Product Matching "Brake"
Choose a Model for your 2023 Toyota
Image
Product
Price
- Raybestos Element 3
- Product Attributes:
- Gasket Or Seal Included: No
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Toyota Tacoma | Front Left |
- Raybestos Element 3
- Product Attributes:
- Gasket Or Seal Included: No
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
90947A2061
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Toyota Tacoma | Front Right |
- PowerStop Evolution Coated Rotor
- EVOLUTION GENUINE GEOMET FULLY COATED ROTORS
- Power Stop - Front Genuine Geomet Coated Rotor
- Product Attributes:
- Rust Resistant Coating: Yes
- Overall Height:
- 2.23
- 56.70
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Grade Type: Regular
- Nominal Thickness:
- 0.94
- 24.00
- Surface Type: Smooth
- Construction: Full Cast
- Discard Thickness:
- 0.87
- 22.00
- ABS Tone Ring Included: No
- Mounting Bolt Hole Circle Diameter:
- 100.00
- 3.94
-
Features:
- Direct original equipment fit and function
- Weight and vane count match original equipment design
- Bolt-on replacement, no modifications necessary
- 100% dynamic mill balanced
- Coated using genuine GEOMET 360 for optimum anti-corrosion protection
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Power Stop Evolution Coated rotors are a direct bolt-on replacement for factory equipment. Fully coated using Genuine GEOMET rust preventative coating; treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without influencing the vehicle's braking performance. Manufactured to original equipment specifications for fitment, weight, vane count, and performance.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Toyota GR86 | Front |
- Raybestos Element 3
- Product Attributes:
- Overall Height:
- 1.945
- 49.4
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.579
- 14.7
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.441
- 62
- Inside Diameter:
- 226.9
- 8.933
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.102
- 28
- Surface Type: Smooth
- Construction: Full Cast
- Mounting Bolt Hole Quantity: 5
- Misc. Holes: 3
- Bearings Included: No
- Discard Thickness:
- 0.984
- 25
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
435120E060, 435120E100, 4351248180, 44949, 71954DL, 922553RGS, YH704837P
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Toyota Highlander | Front |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.941
- 49.3
- Grade Type: Regular
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.571
- 14.5
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.441
- 62
- Inside Diameter:
- 209.8
- 8.26
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.337
- 33.95
- Surface Type: Smooth
- Construction: Full Cast
- Mounting Bolt Hole Quantity: 5
- Misc. Holes: 2
- Bearings Included: No
- Discard Thickness:
- 1.22
- 31
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 114.3
- 4.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.44217, 320.44217, 320.44217F, 4351208060, 4351242070, 4351248140, 4351278020, 60076160, 60476160, 901846, JBR1797, YH720530
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Crown | Front | Platinum |
- Raybestos R-Line
- Product Attributes:
- Disc Brake Caliper Casting Material: Cast Iron
- Bleeder Screw Thread: M7x1
This Part Fits the Following OEM/Substitute Numbers:
10-19405, 141.44273, 142.44273, 19-B3353, 19-P3353, 331-76228, 99-01711B, 9901711B, SC5532, SE3904A
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Crown | Front Right | XLE |
- Z17 EVOLUTION CERAMIC BRAKE PADS W/ HARDWARE
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Product Attributes:
- Slotted: Yes
- Inner Pad Overall Thickness: 15.0
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 15.0
- Friction Surface Scorched: Yes
- Brake Lubricant Included: No
- Pad Shims Included: Yes
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Wear Indicator Attached: No
- Pad Wear Sensor Included: No
-
Features:
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
- Chamfered and slotted to ensure noise free braking
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Thermal scorched pad surface for a fast break-in
- Positive mold technology for consistent wear and performance
- The PowerStop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The PowerStop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Toyota Corolla | Rear |
- Bosch QuietCast Brake Pads
- Bosch QuietCast Ceramic Brake Pads
- Product Attributes:
- Prop 65 Warning Label Required?: Yes
- Friction Material Attachment: Bonded
- Slotted: Yes
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Prop 65 Potential Effects: Cancer
- Automotive Item Weight (lbs): 2.204623 Lb
- Front or Rear Brakes: Rear
- Pad Quantity: 4
- Brake Lubricant Included: Yes
- Friction Material Thickness: 606 Mm
- Prop 65 Chemical 1: Antimony Trioxide
- Abutment Clips Included: Yes
- Pad Shims Included: Yes
- FMSI Number: D606
- Friction Material Composition: Ceramic
- Accessories: N
- Prop 65 Warning Text: This Product Can Expose You To Chemicals Including Antimony Trioxide, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov
- Pad Wear Sensor Included: No
-
Features:
- Bosch OE heritage: 77 years of OE braking excellence promises the highest quality performance, industry-leading strength and durability, and exclusive innovations including Molded Shim Technology (MST)
- OE style rubber core shim: The industry's best pre-attached multilayer shims ensure the highest quality of bonding between rubber and steel, resulting in lower noise, increased strength, and corrosion resistance
- Friction material: Rigorously formulated and tested by Bosch's engineers, the friction material in the QuietCast line are meticulously engineered to achieve superior performance
- Powder-coated backing plate: Prevents rust and corrosion for increased product life of the brake pad
- Slots and chamfers for premium quality, fit, and function
- hardware kit (where available) and synthetic lubricant included to perform a complete brake job
- Powder-coated backing plate: Prevents rust and corrosion for increased product life of the brake pad
- Bosch QuietCast Brake Pads
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Toyota 4Runner | Rear |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: M10 X 1.0
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Female
- Hembra
- End 2 Fitting Inside Diameter:
- M10 X 1,0
- M10 X 1.0
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 10 Mm
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.44141, 2206712, 350-76100, 612517, 90947A2016, 90947A2090, BH143819, BH383913, F143819
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Toyota Tundra | Front Left |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- End 2 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Hose Material:
- Caucho De Etileno Propileno Dieno
- Élastomère Epdm
- Epdm Rubber
- Jacket Included:
- No
- Non
- Diámetro interior de la acoplación de extremo 2: M10 X 1.0
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Female
- Hembra
- End 2 Fitting Inside Diameter:
- M10 X 1,0
- M10 X 1.0
- Color:
- Black
- Negro
- Noir
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Traité
- Treated Steel
- Outer Sleeve Material:
- Caucho
- Élastomère
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- Sí
- Yes
- Describe Type: Flexible Hose
- End 1 Thread Size: 10 Mm
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Toyota Tundra | Front Right |
Showing 1 - 10 of 1104 products
Loading...