Shop By Product Matching "Cardone"
Image
Product
Price
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Sierra 3500 Classic |
- with Hydraulic Power Disc Brakes
- w/o Master Cylinder
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2007 - GMC Sierra 1500 Classic | Hybrid |
- without Master Cylinder
- Remanufactured Power Brake Booster
- Product Attributes:
- FAQ_Q5: Will I Need To Bleed My Power Steering System After Installation?
- Stud Thread Size: 10x1.5
- Brake Service Grade: Regular
- FAQ_Q4: How Much Psi Of Power Steering Pressure Should A Hydraulic Booster Have?
- FAQ_Q7: How Can I Test My Hydraulic Booster?
- FAQ_Q6: What Is The Best Way To Identify A Hydraulic Booster?
- FAQ_Q1: What Types Of Vehicles Are Hydraulic Boosters Used On?
- Neck Seal Included: No
- Mounting Hardware Included: No
- FAQ_Q3: Will I Need To Retain My Master Cylinder Pushrod?
- Master Cylinder Stud Thread Size: 10x1.5
- FAQ_Q2: What Type Of Fluid Does A Hydraulic Booster Require?
- Is Prop Sixty Five Affected: No
- Housing Diameter:
- 2.158
- 54.81
- Product Condition: Remanufactured
- Is the item CARB affected: No
- Brake Pedal Rod Extension Included: No
- Contains Electronic Components: No
- FAQ_Q9: Can I Convert My Vehicle To A Hydraulic Boost System?
- FAQ_Q8: Does My Hydraulic Booster Require Flushing?
- Is Item A Chemical: No
- Is Or Contains A Battery: No
- Booster Type: Hydraulic
- FAA_A6: Most Hydraulic Boosters Are Equipped With A Pedal Rod Identification Number. These Numbers Are Stamped On The End Of The Pedal Rod Near The Eyelet. The Pedal Rod Identification Number Is One Of The Most Accurate Ways To Choose The Correct Replacement Hydr
- FAA_A7: A Hydraulic Booster Can Be Tested Just Like A Vacuum Booster. With The Engine Off, Pump The Brake Pedal Until You Feel Firm Resistance, Then Hold. Start The Engine. Proper Operation Should Result In The Brake Pedal Slightly Sinking.
- FAA_A4: The Hydraulic Booster Is Designed To Operate Within The Pressure Range Of The Power Steering System. In Most Cases This Is At Least 1200 Psi (deadhead Pressure).
- FAA_A5: Yes, Since The Power Steering Lines Have Been Removed, The System Has Been Subjected To Air. The Power Steering System Will Need To Be Bled Using The O.e. Bleeding Procedure.
- FAA_A2: As Part Of The Power Steering System, Hydraulic Boosters Require O.e. Power Steering Fluid.
- FAA_A3: Yes, The Master Cylinder Pushrod, Spring And Retainer Will Need To Be Retained And Reused On The Replacement Hydraulic Booster.
- FAA_A1: Hydraulic Boosters Are Most Commonly Used On Heavy Duty Pickup Trucks And Industrial Applications. However, Hydraulic Boosters Can Be Found On Passenger Vehicles As Well.
- Is Or Contains A Bulb: No
- Gasket Or Seal Included: Yes
- FAA_A8: Yes, The Hydraulic Booster Should Be Flushed Along With The Power Steering System. This Should Be Done In Accordance With The O.e. Maintanence Intervals.
- FAA_A9: This Is Possible, But Not Recommended. Altering Or Modifying A Brake System Puts The Vehicle At Higher Risk Of Brake Failure.
- Does it require SDS: No
- Master Cylinder Included: No
-
Features:
- 100% O.E. quality seals are installed on every unit for like-new performance and reliability.
- Protective coating prevents corrosion and extends product life.
- Master cylinder output rods are pre-adjusted (when included) for quick and easy installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
- CARDONE Remanufactured Hydraulic Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
This Part Fits the Following OEM/Substitute Numbers:
15112793 , 15225284, 15814984, 15814984 , 15870649, 15870649 , 25739959 , 25739959, 25749265
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Savana 3500 |
- with 8600 (lb) Gross Vehicle Weight (GVW) without Master Cylinder
- Remanufactured Power Brake Booster
- Product Attributes:
- FAQ_Q5: Will I Need To Bleed My Power Steering System After Installation?
- Stud Thread Size: 10x1.5
- Brake Service Grade: Regular
- FAQ_Q4: How Much Psi Of Power Steering Pressure Should A Hydraulic Booster Have?
- FAQ_Q7: How Can I Test My Hydraulic Booster?
- FAQ_Q6: What Is The Best Way To Identify A Hydraulic Booster?
- FAQ_Q1: What Types Of Vehicles Are Hydraulic Boosters Used On?
- Neck Seal Included: No
- Mounting Hardware Included: No
- FAQ_Q3: Will I Need To Retain My Master Cylinder Pushrod?
- Master Cylinder Stud Thread Size: 10x1.5
- FAQ_Q2: What Type Of Fluid Does A Hydraulic Booster Require?
- Is Prop Sixty Five Affected: No
- Housing Diameter:
- 2.158
- 54.81
- Product Condition: Remanufactured
- Is the item CARB affected: No
- Brake Pedal Rod Extension Included: No
- Contains Electronic Components: No
- FAQ_Q9: Can I Convert My Vehicle To A Hydraulic Boost System?
- FAQ_Q8: Does My Hydraulic Booster Require Flushing?
- Is Item A Chemical: No
- Is Or Contains A Battery: No
- Booster Type: Hydraulic
- FAA_A6: Most Hydraulic Boosters Are Equipped With A Pedal Rod Identification Number. These Numbers Are Stamped On The End Of The Pedal Rod Near The Eyelet. The Pedal Rod Identification Number Is One Of The Most Accurate Ways To Choose The Correct Replacement Hydr
- FAA_A7: A Hydraulic Booster Can Be Tested Just Like A Vacuum Booster. With The Engine Off, Pump The Brake Pedal Until You Feel Firm Resistance, Then Hold. Start The Engine. Proper Operation Should Result In The Brake Pedal Slightly Sinking.
- FAA_A4: The Hydraulic Booster Is Designed To Operate Within The Pressure Range Of The Power Steering System. In Most Cases This Is At Least 1200 Psi (deadhead Pressure).
- FAA_A5: Yes, Since The Power Steering Lines Have Been Removed, The System Has Been Subjected To Air. The Power Steering System Will Need To Be Bled Using The O.e. Bleeding Procedure.
- FAA_A2: As Part Of The Power Steering System, Hydraulic Boosters Require O.e. Power Steering Fluid.
- FAA_A3: Yes, The Master Cylinder Pushrod, Spring And Retainer Will Need To Be Retained And Reused On The Replacement Hydraulic Booster.
- FAA_A1: Hydraulic Boosters Are Most Commonly Used On Heavy Duty Pickup Trucks And Industrial Applications. However, Hydraulic Boosters Can Be Found On Passenger Vehicles As Well.
- Is Or Contains A Bulb: No
- Gasket Or Seal Included: Yes
- FAA_A8: Yes, The Hydraulic Booster Should Be Flushed Along With The Power Steering System. This Should Be Done In Accordance With The O.e. Maintanence Intervals.
- FAA_A9: This Is Possible, But Not Recommended. Altering Or Modifying A Brake System Puts The Vehicle At Higher Risk Of Brake Failure.
- Does it require SDS: No
- Master Cylinder Included: No
-
Features:
- 100% O.E. quality seals are installed on every unit for like-new performance and reliability.
- Protective coating prevents corrosion and extends product life.
- Master cylinder output rods are pre-adjusted (when included) for quick and easy installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
- CARDONE Remanufactured Hydraulic Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Savana 2500 |
- with Hydraulic Power Includes Inner Tie Rods For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
- Remanufactured Rack and Pinion Assembly
- Product Attributes:
- FAQ_Q4: Are There Any Steps That Should Be Done Prior To Alignment?
- FAQ_Q1: I Replaced The Rack And Now The Power Steering Pump Is Whining. It Never Did This Before! What Happened?
- Grade Type: Regular
- Mounting Hardware Included: No
- FAQ_Q3: The Replacement Rack And Pinion Is Installed And The Steering Wheel Has Too Much Play. Should I Adjust The Rack?
- FAQ_Q2: The Steering Wheel Is Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
- Is Prop Sixty Five Affected: No
- Outlet Line Fitting Gender: Male
- End To End Length:
- 1393.82
- 54.875
- Product Condition: Remanufactured
- Is the item CARB affected: No
- Contains Electronic Components: No
- Steering Input Shaft Diameter:
- 0.785
- 19.93
- Mounting Brackets Included: No
- Type: Hydraulic
- Is Item A Chemical: No
- Total Turns Lock To Lock: 3
- Input Shaft Type: Double Flat
- Inlet Line Fitting Diameter:
- 0.462
- 11.73
- Is Or Contains A Battery: No
- FAA_A4: Yes, The Boot Clamps Must Be Loosened To Set The Toe Adjustment When Performing A Front-end Alignment. Failure To Loosen The Clamps Will Twist The Boots During Turning Maneuvers Causing Cracks To Form On Boot. Once The Boot Is Torn, Road Debris And Water
- Mounting Hole Quantity: 4
- FAA_A2: The Geometry Of The Front Suspension Is Designed To Return The Steering Wheel To Center Coming Out Of A Turn. If The Steering Wheel Is Not Returning To Center On Its Own When Coming Out Of A Turn, Check The Front-end Alignment Settings And Inspect For Bin
- FAA_A3: No. The Rack And Pinion Has Been Adjusted At The Factory. No Additional Adjustment Is Necessary. Try Isolating The Rack To Find Out Where The Play Exists. If You Hold The Inner Tie Rod And Have Someone Turn The Wheel, Does The Play Disappear? If So, The P
- FAA_A1: The Most Likely Cause Of A Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled. This May Take A Few Attempts Depending On The Design Of The System.
- Outer Tie Rods Included: No
- Is Or Contains A Bulb: No
- Gasket Or Seal Included: Yes
- Inlet Line Fitting Gender: Male
- Does it require SDS: No
- Inner Tie Rods Included: Yes
- Outlet Line Fitting Diameter:
- 0.451
- 11.46
- Bellows Color: Black
-
Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100% performance testing to ensure perfect fit, function and reliable performance.
- 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
This Part Fits the Following OEM/Substitute Numbers:
15254060, 15254062, 19133646 , 19133648, 19133648 , 19153072, 19153072 , 19153073, 19153074, 19153074 , 19153075, 19178559, 19178559 , 19178561, 19207489 , 19207490, 19207491, 19207491 ...VIEW MORE
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2007 - GMC Sierra 1500 | Crew Cab Pickup |
- Cardone/OEF3 Reman
- Friction Ready - with Installation Hardware w/o Bracket
- Unloaded w/o Bracket
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - GMC Envoy | Rear Left |
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Acadia |
- Reman Complete Long Rack
- with Sport Chassis Package (RPO ZQ8)
- w/o Outer Tie Rod Ends
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2007 - GMC Canyon | RWD |
- Reman Complete Long Rack
- with Increased Capacity Chassis Package (RPO Z85)
- w/o Outer Tie Rod Ends
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2007 - GMC Canyon | RWD |
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - GMC Canyon |
Showing 1 - 10 of 88 products
Loading...