Image
Product
Price
- Antifreeze/Coolant
- OE #OL999-9011
- Asian Vehicle Blue Antifreeze/Coolant Ready-to-Use 1 GA
- Asian Vehicle Blue Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Meets the following OEM and industry specifications: Hyundai/KIA MS 591-08, Mitsubishi ES-64217, JIS K 2234-1994, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- ZEREX™ Asian Vehicle Antifreeze/Coolant is specifically formulated to meet the requirements of Asian vehicle manufacturers (Honda®, Nissan®, KIA®, Hyundai® and others) requiring a blue, silicate free Hybrid Organic Acid Technology (HOAT) with a phosphate additive. This patented formula is designed to replace the original fluid and provides protection from rust, corrosion, boil overs and freezing.
Additional Fitment Information:
| Vehicle |
|---|
| 1982 - Honda Prelude |
- W/Sankyo A.C. Compr.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 34.84
- 885
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 34
- 864
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0029974992, 0049979892, 0114596, 0119791, 023145271, 023145271B, 027903137A, 03-02-719-8, 030768, 039289, 0403341, 049903137, 054903137, 054903157, 06346, 074145271J, 0950863, 10-01866...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Honda Civic | L | 1487 | Air Conditioning | GAS | 4 Cyl 1.5L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- (14x25x16mm)
Additional Fitment Information:
| Vehicle | Transmission |
|---|---|
| 1982 - Honda Prelude | Manual |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Main Fuse - 55 Amp
- Strip 55 Amo
- 55 Amp.
Additional Fitment Information:
| Vehicle |
|---|
| 1982 - Honda Prelude |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 55 Amp
- Strip 55 Amo
- 55 Amp.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1982 - Honda Civic | 1500 DX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1982 - Honda Accord |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Honda Civic | L | 1335 | 4 Cyl 1.3L | - |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.75
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 53104
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53104 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Honda Accord | L | 1751 | 4 Cyl 1.8L | - |
Showing 1 - 8 of 8 products
Loading...