Image
Product
Price
- Relief pressure 16 lb
- Safety Lever
This Part Fits the Following OEM/Substitute Numbers:
10330, 10330ST, 12R7S, 1678-290347, 17216, 380170, 7716, 9ST16, P7716, ST16
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Isuzu Pickup | L | 1949 | 4 Cyl 1.9L | - |
- 195 Degrees F Higher Alternate Temperature Replacement
- Standard
This Part Fits the Following OEM/Substitute Numbers:
12T19E, 131-151, 13399, 13779, 15119, 15399, 1601-24110, 228-195, 22895, 239, 33189, 3399, 35399, 8134146, 9228195, P3399, S339195, TX10987D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Isuzu Pickup | L | 2238 | 4 Cyl 2.2L | - |
- Volume 75 Gallons; L 43 in. x W 31 in. x H 24 in.; White Steel; L-Shaped
- Heavy Duty Series Liquid Transfer Tank; Volume 75 Gallons; L 43 in. x W 31 in. x H 24 in.; White Steel; L-Shaped;
- Heavy Duty Series Liquid Transfer Tank
- Product Attributes:
- Gallon Capacity: 75
-
Features:
- 75 Gallon Capacity
- Abrasion Resistant Powder Coated Finish
- L Shape Allows Use With Most Standard Toolboxes
- Baffled To Reduce Liquid Movement Inside The Tank
- Constructed From Heavy Duty 14 ga. Steel
- Lifting Eyes For Installation When Tank Is Empty
- Mounting Kit Included
- Vented Lockable Cap Included
- 100 percent pressure tested. Heavy duty 14 gauge steel. Durable powder coated finish. Flush mounted dual 2 in. reinforced bungs strengthen the pump mounting. Baffles add strength while preventing the contents from shifting too quickly. Vented lockable cap. Lifting eyes for installation for when the tank is empty. Welded 11 gauge moutning brackets. Installation kit is included.
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 1983 - Isuzu Pickup | Fleetside | 85.0 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 35.62
- 905
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 35
- 889
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
000067524704, 0070186, 0110033, 0211787023, 0211787026, 027004127, 027004127Y, 027015078, 0303289, 0401353, 0407333, 04353, 069707829, 105807, 107038, 1104531, 1109614, 11378...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1983 - Isuzu Pickup | L | 1949 | Fan and Alternator | GAS | 4 Cyl 1.9L | - |
- WIX Spin On Fuel Water Separator with Open End Bottom
- Original Equipment Part Number 5-13240-032-0
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.83
- Burst Pressure: 310
- Duty Type: Ld
- Micron: 10.00
- Media Material: Cellulose
- Class: A
- Prop 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This Part Fits the Following OEM/Substitute Numbers:
0 986 450 505, 0 986 450 508, 0 986 450 514, 0 986 450 719, 0 K467 23 570, 0 K60C 23570, 0 KJ1E 23570, 0301935, 0430814, 0430869, 055184, 0602042700, 0986TF0086, 0F17040391, 1 457 434 285, 1 457 434 285-4NO, 1 457 434 301, 1 457 434 302...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1983 - Isuzu Pickup | L | 2238 | United States | DIESEL | 4 Cyl 2.2L | - |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1983 - Isuzu Pickup | Rear |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23651
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23651. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1985-1988 Chevrolet Spectrum, 1981-1989 Isuzu I-Mark, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1983 - Isuzu I-Mark | L | 1817 | GAS | 4 Cyl 1.8L | - |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23651. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1985-1988 Chevrolet Spectrum, 1981-1989 Isuzu I-Mark, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1983 - Isuzu I-Mark | L | 1817 | GAS | 4 Cyl 1.8L | - |
- Easy fit Cover, 4 Layer; Fits 5.5' - 6' Trucks; Incl Lock, Cable, Bag
- Easy fit Truck Cover; Fits 5'5"-6' Beds; 4 Layer; Includes Lock, Cable, and Storage Bag
- Product Attributes:
- Size: Fits 5.5' - 6' Bed
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Soft And Durable Diamond Bond Pattern
- Unique 4-Layer Breathable Material
- Ultraviolet Protection Against Sun And Heat
- Polypropylene Layers Repel Water
- Side Grommets For Tie Downs
- Includes Free Locking Cable And Storage Bag
- Indoor And Outdoor Usage
- The Bed Section Easy fit Truck Cover (fits truck bed 5 1/2' to 6') is made of a 4-layer non-woven polypropylene material which is breathable and repels water without trapping moisture. The soft and durable backing pampers the paint finish and protects your truck from the sun's UV rays, dirt, dust, moisture and pollution. Double stitched elastic hem around the bottom of the covers along with pre-installed side eyelets are used to secure the cover with the lock and cable. Includes grommet kit for antenna allowances.
Additional Fitment Information:
| Vehicle | Bed Length |
|---|---|
| 1983 - Isuzu Pickup | 72.0 |
Showing 1 - 9 of 9 products
Loading...