Shop By Product Matching "Derale"
Image
Product
Price
- 1in. Aluminum Belt Fan Spacer
- Aluminum Spacer Construction; Clear Anodize Color; 1 in. Length; 5/8 in. Male Pilot Diameter; 5/8 in. Or 3/4 in. Female Plot Diameter
- Fan Spacer; 1in. (Female 5/8-3/4 pilot)
- Belt Fan Spacer
-
Features:
- Aluminum Construction
- Anodized Clear Finish
- 1 in. Length w/5/8 in. Or 3/4 in. Female Pilot
- Includes Fine And Course 5/16 in. Thread Hardware
- Fan Should Have Minimum Clearance Of 3/4 in. From The Radiator
- This 1 in. belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8 in. or 3/4 in. pilot water pumps.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Jimmy |
- Transmission Cooling Pan; Reduces Fluid Temps up to 50deg.F; Increase Capacity
- 2-7/8 in. Pan Depth; 2 in. Tube Depth; 1/8 NPT Temp Bung Size
- Transmission Cooling Pan (GM TH400 Std)
- Transmission Cooling Pan
- Product Attributes:
- Trans Model: Gm- Th400 (auto) 3 Speed
-
Features:
- Heavy Gauge Stamped Steel Construction
- Two Stage Heat Dissipating Black Finish
- 1/8 in. NPT Temperature Sender Port
- Reduces Fluid Temperatures Up To 50 Degrees Fahrenheit
- Increases Fluid Capacity By 1 qts. 17 oz.
- Patented Turbulator Cooling Tubes Add Heat Transfer Capability
- Magnetic Drain Plug With Increased Magnetic Strength And Rubber/Steel Washer
- 2-7/8 in. Pan Depth
- Derale's TH400 Transmission Cooling Pan #14201 uses air passing beneath the vehicle and redirects it to help lower transmission oil temperatures. With brazed, turbulator-equipped airway tubes passing through the lower section of the transmission pan for more efficient cooling, each is individually pressure tested to ensure a leak-free pan. We've included a much stronger magnetic drain plug and rubber/steel reusable washer, in addition to a 1/8 in. NPT temperature sender bung located in the side of the pan. Finished with a durable black two-stage coating, each pan also includes neoprene gasket and 1/8 in. NPT temperature sender plug.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Jimmy |
- Transmission Cooling Pan; Reduces Fluid Temps up to 50deg.F; Increase Capacity
- 3-1/4 in. Pan Depth; 2-3/8 in. Tube Depth; 1/8 NPT Temp Bung Size
- Transmission Cooling Pan (GM TH350)
- Transmission Cooling Pan
- Product Attributes:
- Trans Model: Gm- Th350 (auto) 3 Speed
-
Features:
- Heavy Gauge Stamped Steel Construction
- Two Stage Heat Dissipating Black Finish
- 1/8 in. NPT Temperature Sender Port
- Reduces Fluid Temperatures Up To 50 Degrees Fahrenheit
- Increases Fluid Capacity By 2 qts.
- Patented Turbulator Cooling Tubes Add Heat Transfer Capability
- Magnetic Drain Plug With Increased Magnetic Strength And Rubber/Steel Washer
- 3-1/4 in. Pan Depth
- Derale's TH350 Transmission Cooling Pan #14200 uses air passing beneath the vehicle and redirects it to help lower transmission oil temperatures. With brazed, turbulator-equipped airway tubes passing through the lower section of the transmission pan for more efficient cooling, each is individually pressure tested to ensure a leak-free pan. We've included a much stronger magnetic drain plug and rubber/steel reusable washer, in addition to a 1/8 in. NPT temperature sender bung located in the side of the pan. Finished with a durable black two-stage coating, each pan also includes neoprene gasket and 1/8 in. NPT temperature sender plug.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Sprint |
- 12in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 21/15 Amp Draw High/Low; 12-3/4 in. Width; 12-3/4 in. Height; 2-5/8 in. Depth; 8-1/4 in. x 11-5/8 in. Mounting; Single
- 12in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Steel Fan Blades
- Maximum Full-Time Airflow
- Black Powder Coated Finish
- 20 in. Reverse Rotation Design
- Rated Up To 8.000 Revolutions Per Minute
- Our most compact version in our High Output Single RAD fan series, this 12 in. fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 1450 CFM while drawing up to 21 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC C15/C1500 Pickup |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Jimmy |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Jimmy |
- 18in. High Performance Stainless Steel Standard Rotation Flex Fan; Black Hub
- Stainless Steel; Black Hub; 18-1/4 in. Diameter; 1-3/4 in./2-1/4 in. Flange Bolt Spacing; 1-1/4 in. Depth; 50 Degrees Blade Pitch; Standard Rotation
- 18in. HP Stnless Steel Flex Fan (Black Hub)
- High Performance Flex Fan
-
Features:
- Stainless Steel Fan Blades
- Black Powder Coated Hub
- Rated Up To 8.000 Revolutions Per Minute
- 18 in. Standard Rotation Flex Fan Design
- Our 18 in. high performance, standard rotation flex fan features 6 stainless steel blades and a black powder coated hub and is rated for engine speeds up to 8,000 rpm. Great for applications where space is at a premium.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Jimmy |
- 19 Row Series 8000 Plate/Fin Transmission Cooler Kit; 11/32in.
- Plate And Fin Style; Aluminum; 11 in. Width; 6-3/4 in. x 8 in. Mounting; 8-3/4 in. Height; 7/8 in. Depth
- Plate/Fin Transmission Cooler Kit (11/32in.)
- Series 8000 Transmission Cooler Kit
-
Features:
- Embossed Turbulators Inserted In Each Tube Agitate Fluid
- Extruded Plastic Cooling Fin Guards
- Improves Transmission Performance
- Sturdy Furnace Brazed Aluminum Construction
- 19 Row Cooler Design
- 3/4 in. Embossed Turbulators Maximize Cooling
- Rated At 22000 GVW
- 4 ft. Hose Length
- Includes Complete Hardware Kit
- A step up from Tube & Fin type coolers, this Plate and Fin cooler features strong furnace-brazed construction, 7/8 in. wide plates, 3/4 in. embossed turbulators which maximize heat transfer while also minimizing pressure drop. This unit is perfect for medium to full-size cars and intermediate SUVs that see light to medium duty use and some towing. It greatly extends transmission life by preventing heat-related transmission failures, and improve shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16 in. transmission cooler lines.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Transmode |
- 14in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 22/16.2 Amp Draw High/Low; 14-1/2 in. Width; 14-1/2 in. Height; 2-5/8 in. Depth; 8-3/4 in. x 13-1/4 in. Mounting; Single
- 14in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 14.000 In.
-
Features:
- Mounts As Pusher Or Puller w/out Flipping Blade
- State-Of-The-Art Symmetrical Design
- High Output 300 Watt Motor
- 2100 CFM On High Speed/1500 CFM On Low Speed
- A very popular primary cooling fan, this 14 in. High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2100 CFM while drawing up to 22 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Jimmy |
- 1/2in. Aluminum Belt Fan Spacer
- Aluminum Spacer Construction; Clear Anodize Color; 1/2 in. Length; 5/8 in. Male And Female Pilot Diameter; 1-3/4 in./2-1/4 in. Flange Bolt Spacing
- Fan Spacer; 1/2in. (Female 5/8 Pilot)
- Belt Fan Spacer
-
Features:
- Aluminum Construction
- Anodized Clear Finish
- 1/2 in. Length w/5/8 in. Female Pilot
- Includes Fine And Course 5/16 in. Thread Hardware
- Fan Should Have Minimum Clearance Of 3/4 in. From The Radiator
- This 1/2 in. belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8 in. pilot water pumps.
Additional Fitment Information:
| Vehicle |
|---|
| 1973 - GMC Jimmy |
Showing 1 - 10 of 15 products
Loading...