Image
Product
Price
- w/7/8 in. Thick w/2 Bolt Caliper Mount
- Brake Rotor; Front; w/7/8 in. Thick w/2 Bolt Caliper Mount;
- Brake Rotor
-
Features:
- Brake Rotor
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Jeep Scrambler | Front |
- w/5 Bolt Flange Mount; 7/8 in. Thick Rotor
- Hub And Rotor Assembly; Front; w/5 Bolt Flange Mount; 7/8 in. Thick Rotor;
- Hub And Rotor Assembly
-
Features:
- Hub And Rotor Assembly
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Jeep Scrambler | Front |
- StopTech Sport Slotted Brake Rotor; Front and Rear Left
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal. Especially effective with higher friction; European style brake pad compounds. Slotted for increased bite; improved looks and better performance
- StopTech Sport Slotted Disc Brake Rotors
-
Features:
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal. Especially effective with higher friction
- European style brake pad compounds. Slotted for increased bite
- improved looks and better performance
- StopTech Slotted Sport Rotors are 1-piece direct replacement brake discs for factory brake systems and stock calipers that look great behind your wheels and offer significantly improved braking performance. The unique slotting aids with heat and brake dust dispersal; prevents glazing of the pads; adds bite and improves wet and dry braking performance. Built to last; the black e-coating provides protection from corrosion and the high carbon metallurgy (in most applications) offers quieter operation; better crack resistance and increased performance.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 1982 - Dodge Dart | Front Left | Mexico |
- StopTech Sport Slotted Brake Rotor; Front Right
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal. Especially effective with higher friction; European style brake pad compounds. Slotted for increased bite; improved looks and better performance
- StopTech Sport Slotted Disc Brake Rotors
-
Features:
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal. Especially effective with higher friction
- European style brake pad compounds. Slotted for increased bite
- improved looks and better performance
- StopTech Slotted Sport Rotors are 1-piece direct replacement brake discs for factory brake systems and stock calipers that look great behind your wheels and offer significantly improved braking performance. The unique slotting aids with heat and brake dust dispersal; prevents glazing of the pads; adds bite and improves wet and dry braking performance. Built to last; the black e-coating provides protection from corrosion and the high carbon metallurgy (in most applications) offers quieter operation; better crack resistance and increased performance.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Chevrolet Corvette | Front Right |
- PowerStop Evolution Performance Drilled, Slotted & Plated Brake Rotor Pair
- EVOLUTION DRILLED & SLOTTED ZINC PLATED ROTORS (PAIR)
- Power Stop - Front Drilled, Slotted and Zinc Plated Brake Rotor Pair - Contains AR8210XL & AR8210XR
- Product Attributes:
- Rust Resistant Coating: Yes
- Overall Height:
- 3.09
- 78.50
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Grade Type: Performance
- Nominal Thickness:
- 1.25
- 31.80
- Surface Type: Slotted X Drilled
- Construction: Full Cast
- Discard Thickness:
- 1.21
- 30.80
- ABS Tone Ring Included: No
- Mounting Bolt Hole Circle Diameter:
- 120.70
- 4.75
-
Features:
- 100% dynamic mill balanced
- Zinc plated for protection against corrosion
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Slotted friction surface sweeps away gasses, dust, and water
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Sold as a pair
- Precision cross-drilled for maximum cooling and optimum performance
- Weight and vane count match original equipment design
- Weight and vane count match original equipment design
- Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
This Part Fits the Following OEM/Substitute Numbers:
120.62010, 5500, 5544, AR8210XPR, BD60240
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Chevrolet Corvette | Front |
- PowerStop Evolution Performance Drilled, Slotted & Plated Brake Rotor Pair
- EVOLUTION DRILLED & SLOTTED ZINC PLATED ROTORS (PAIR)
- Power Stop - Drilled, Slotted and Zinc Plated Brake Rotor Pair - Contains AR8207XL & AR8207XR
- Product Attributes:
- Rust Resistant Coating: Yes
- Overall Height:
- 3.11
- 79.00
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Grade Type: Performance
- Nominal Thickness:
- 1.25
- 31.80
- Surface Type: Slotted X Drilled
- Construction: Full Cast
- Discard Thickness:
- 1.21
- 30.80
- ABS Tone Ring Included: No
- Mounting Bolt Hole Circle Diameter:
- 120.70
- 4.75
-
Features:
- Weight and vane count match original equipment design
- Precision cross-drilled for maximum cooling and optimum performance
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Slotted friction surface sweeps away gasses, dust, and water
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Bolt-on upgrade for stock brakes, no modifications necessary
- Sold as a pair
- Chamfered drill holes and rounded slots to minimize stress cracking
- Weight and vane count match original equipment design
- Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
This Part Fits the Following OEM/Substitute Numbers:
120.62007, 5501, 5541, AR8207XPR, BD60401
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Chevrolet Corvette | Rear |
- Replaces 105066 Replaces 5066RGS Replaces 5066
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 2.41
- 61.2
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.512
- 13
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.781
- 70.65
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.035
- 26.3
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.957
- 24.3
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 120.65
- 4.75
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
101510, 1167, 120.62016, 121.62016, 126.62016SL, 126.62016SR, 127.62016CL, 127.62016CR, 127.62016L, 127.62016R, 14026865, 141287, 14675, 177-666, 210295-C, 227.62016L, 227.62016R, 325693...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Chevrolet Camaro | Rear |
- Replaces 105980 Replaces 5980 Replaces 5980RGS
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 3.21
- 81.55
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.654
- 16.6
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 130.3
- 5.13
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.535
- 39
- Discard Thickness:
- 1.465
- 37.2
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 165.1
- 6.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
09.8454.85, 101011, 101628, 120.66015, 121.66015, 125.66015, 126.66015SL, 126.66015SR, 127.66015L, 127.66015R, 14-55001, 141480, 15534074, 177-807, 210406-C, 211523-DP, 27178, 320.66015...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Rear Brake | Front Brake |
|---|---|---|---|
| 1982 - GMC P3500 | Front | Disc | Disc |
- Replaces 107050 Replaces 7050 Replaces 7050RGS with 3500lb Axle(s) with Locking Hubs
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 2.595
- 65.9
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.645
- 16.4
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 101.65
- 4.002
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 1.245
- 31.6
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.18
- 29.95
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 139.7
- 5.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
04137762, 103240, 103418, 120.67005, 121.67005, 126.67005CSL, 126.67005CSR, 126.67005SL, 126.67005SR, 127.67005CL, 127.67005CR, 127.67005L, 127.67005R, 14-5324, 141289, 14670, 1560, 177-657...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1982 - Dodge Ramcharger | Front | 4WD |
- Replaces 107050 Replaces 7050 Replaces 7050RGS with 3500lb Axle(s) with 5 Stud Rotor with Locking Hubs
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 2.595
- 65.9
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.645
- 16.4
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 101.65
- 4.002
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 1.245
- 31.6
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.18
- 29.95
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 139.7
- 5.5
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Dodge W150 | Front |
Showing 1 - 10 of 125 products
Loading...