Image
Product
Price
- Engine Oil Pan
- OE Design
- Product Attributes:
- Engine Oil Cooler Return Fitting:
- No
- Non
- Maximum Depth: 2.56
- Sump Location:
- Avant
- Delantero
- Front
- Drain Thread Size: M12 X 1.25
- Installation Hardware Included:
- No
- Non
- Baffled:
- No
- Non
- Windage Tray Included:
- No
- Non
- Dipstick Port:
- No
- Non
- Gasket Or Seal Included:
- No
- Non
- Sump Type:
- Húmedo
- Wet
- Maximum Width: 2.0
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: Cárter De Aceite
- Crank Shaft Wiper Included:
- No
- Non
- Kick Out Type Pan:
- No
- Non
- Drain Plug Included:
- Oui
- Sí
- Yes
- Pickup Included:
- No
- Non
- Material:
- Acero
- Steel
- Engine Oil Cooler Return Fitting:
-
Features:
- Direct replacement - this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly - includes replacement pan and drain plugs to match original components
- Durable design - high-strength coating prevents future corrosion
- Trustworthy value - backed by team of engineers and quality control experts in the United States
- Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
This Part Fits the Following OEM/Substitute Numbers:
103300, 111102Y000, 11110JA10B, 11110JA10D, 11110ZA000, 264505, 3310267, 3312472052215996, 3312472052216301, 501324, A380265, A380274, INSP24A, KNSP24A, NI149592, NSP24A, SK264505
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Region | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2020 - INFINITI QX60 | V | 3498 | Lower | VQ35DE | Mexico | 6 Cyl 3.5L | - |
- TPMS Aluminum Clamp-In Valve Stem For Dorman DiRECT-FIT Sensor
- Fits only Dorman DIRECT-FIT TPMS Sensors Replacement Clamp-In Valve Kit
- Product Attributes:
- Contenidos del paquete: Reemplazo Del Vástago De La Válvula De Sujeción Tpms De Los Sensores Dorman
- Material:
- Aluminio Anodizado
- Anodized Aluminum
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - INFINITI QX70 |
- Suspension Control Arm And Ball Joint Assembly
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Mounting Hole Diameter: 12.3
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Articulación de rótula instalada: Sí
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Roscado
- Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Thread Diameter: 14
- Contenidos del paquete: Conjunto De Articulación De Rótula Y Brazo De Control
- Control Arm Color:
- Black
- Negro
- Noir
- Control Arm Maximum Width: 288.5
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
101-6455, 102-6455, 1516004, 1516020, 2605925, 2605925M, 2606345, 4CB80034, 502-1205, 545241LA0A, 545245ZA0A, 545246JS0A, 545247S000, 54524ZC30A, 54524ZQ00A, 54524ZR00A, 54524ZR00B, 622.42084...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - INFINITI QX80 | Front Right Upper |
- TPMS Rubber Snap-In Stem for Dorman DiRECT-FIT or MULTi-FIT Sensor
- Fits only Dorman DIRECT-FIT or Dorman Programmable Universal MULTI-FIT TPMS Sensors Replacement Snap-In Valve Kit
- Product Attributes:
- Contenidos del paquete: Juego De Válvulas De Sujeción A Presión Que Funciona Con Todos Los Sensores Dorman Tpms
- Material:
- Caucho
- Élastomère
- Rubber
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - INFINITI QX70 |
- Positive Battery Terminal
- Positive Terminal
- Product Attributes:
- Maximum Cable Gauge: 1/0
- Color:
- Plateado
- Silver
- Terminal Type:
- Contacto De Presión
- Pressure Contact
- Contenidos del paquete:
- 1 Borne De La Batería
- 1 Juego De Herraje
- Conductor Material:
- Cobre
- Copper
- Epoxy Coated:
- No
- Non
-
Features:
- Ideal replacement - this battery terminal is a direct replacement for a corroded or worn original equipment battery terminal
- Durable construction - this battery terminal features a corrosion resistant finish to ensure excellent conductivity
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
- Poor battery performance because of corroded or worn out battery terminals? This replacement terminal matches the fit of the original equipment mounting hardware to ensure reliable electrical conductivity at the battery.
This Part Fits the Following OEM/Substitute Numbers:
243407F000, 9098205030
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - INFINITI QX70 |
- Wheel Nut M12-1.25 Dometop - 21mm Hex, 38.6mm Length
- Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: OE Replacement Thread Direction: Clockwise (Right) Package Quantity: 10 Packaging Type: Box Thread Type: Fine Steel Thread Size: M12-1.25 Overall Length: 1.52 in Color: Gray Wheel Nut Style: Dometop Capped Nut
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.25
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Dometop Capped Nut
- Hex Size: 21 Mm
- Diseño de extremo abierto: No
- Color:
- Gray
- Gris
- Estilo de la tuerca de la rueda: Tuerca Reforzada De La Parte Superior Del Domo
- Contenidos del paquete: 10 Tuercas De La Rueda
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- No
- Non
- Material:
- Acero
- Steel
-
Features:
- Improved design - direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
- Corrosion resistant - by removing the veneer of the OEM lug nut design there's no chance of moisture and rust causing it to bulge and deform
- Thoroughly tested - part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.
This Part Fits the Following OEM/Substitute Numbers:
402244HH0A, 40224JK00A
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - INFINITI Q50 |
- Engine Oil Pan
- Product Attributes:
- Engine Oil Cooler Return Fitting:
- No
- Non
- Sump Location:
- Avant
- Delantero
- Front
- Baffled:
- Oui
- Sí
- Yes
- Oil Level Sensor Port:
- No
- Non
- Finish:
- Sin Recubrimiento
- Uncoated
- Windage Tray Included:
- No
- Non
- Dipstick Port:
- No
- Non
- Sump Type:
- Húmedo
- Wet
- Color:
- Plateado
- Silver
- Drain Plug Included:
- No
- Non
- Material:
- Aluminio
- Aluminum
- Capacity: 6.5
- Maximum Depth: 5
- Pump Type:
- Electric
- Eléctrico
- Drain Thread Size: M12 X 1.25mm
- Installation Hardware Included:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Minimum Depth:
- 1
- 1 In
- Maximum Width: 7.5
- Contenidos del paquete: 1 Bandeja De Aceite Del Motor
- Crank Shaft Wiper Included:
- No
- Non
- Kick Out Type Pan:
- No
- Non
- Strap Included:
- No
- Non
- Pickup Included:
- No
- Non
- Engine Oil Cooler Return Fitting:
-
Features:
- Improved design - this engine oil pan is manufactured from durable aluminum rather than the factory design's plastic that can leak and fail from cracking caused by heat or impact damage
- Protects engine - features a metal magnetic drain plug that securely fits into threads precision-machined into the pan to protect the engine from debris in the oil caused by internal component wear
- Direct replacement - designed to match the fit and function of the original equipment engine oil pan on specified Nissan Q50 and Q60 sedans with 3.0L engines
- Simpler service - a relocated drain plug, with the bottom of the plug level with the bottom of the pan, helps enable a more complete drain
- When the original equipment plastic engine oil pan on certain Nissan Q50 and Q60 sedans and coupes cracks from heat or impact, the dealer repair solution is to offer the same failure-prone design, inviting similar future failures. This Dorman OE FIX oil pan is designed to precisely match the fit of the factory pan, but is made from rugged aluminum for a more permanent and damage-resistant repair. Our engineers also relocated the drain plug to allow a more complete drain by making the bottom of the plug level with the bottom of the pan. To help protect the engine from harmful metal debris in the oil that results from internal component wear, this pan also features a convenient magnetic drain plug. This all-metal plug is designed for rock-solid fit into threads precision-machined directly into the pan, eliminating the potential for the leaks that occur when the overmolded plastic-over-brass factory bung loosens and fails.
This Part Fits the Following OEM/Substitute Numbers:
111105CA1A, 111105CA2A, NSP48A
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2020 - INFINITI Q60 | V | 2997 | Lower | 6 Cyl 3.0L | RWD | - |
- TPMS Aluminum Clamp-In Valve Stem For Dorman MULTi-FIT Sensor
- Fits only Dorman Programmable Universal MULTI-FIT TPMS Sensors Replacement Clamp-In Valve Kit
- Product Attributes:
- Contenidos del paquete: Juego De Válvulas De Sujeción Para Grampar De Repuesto Para Sensor Dorman Multi-fit
- Material:
- Aluminio Anodizado
- Anodized Aluminum
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - INFINITI Q60 |
- Radiator Mount Bushing
- Package Quantity: 2
- Product Attributes:
- Contenidos del paquete: 2 Bujes De Montaje Del Radiadores
- Material:
- Caucho
- Élastomère
- Rubber
-
Features:
- Direct replacement - this radiator mount bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This radiator mount bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
2150610V00, 215069BL0A
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - INFINITI Q50 |
- Front Left Knuckle
- Product Attributes:
- Instruction Manual Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Color:
- Plateado
- Silver
- Axle Included:
- No
- Non
- Contenidos del paquete: 1 Muñón
- Hub Included:
- No
- Non
- Material:
- Aluminio
- Aluminum
- Instruction Manual Included:
-
Features:
- Direct replacement - this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit - precision-engineered to match the dimensions of original components
- Trustworthy construction - manufactured to strict standards using durable materials
- Rigorously tested - thorough quality control measures ensure longevity
- This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
400153JA1A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - INFINITI QX60 | Front Left |
Showing 1 - 10 of 123 products
Loading...