Shop By Product Matching "Engine"

Choose a Model for your 1970 Audi


Showing 1 - 10 of 24 products
Image
SKU
Product
Rating
Price

Fram
  • FRAM, PH2870A, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.210
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.205
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 310.000
    • Gasket Material: Nitrile Rubber
    • Housing Color: Orange
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 22.000
    • Marine Approved: No
    • Outside Diameter: 2.984
    • Gasket Outside Diameter: 2.480
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
21394MP, 51792XE, 61394BP, CN-10, L20014

Additional Fitment Information:
Vehicle
1970 - Audi Super 90

Prestone
  • Prestone Amam Gen 2 50/50 6/1 GAL
  • Extended Life 50/50, Ready to Use Prediluted
  • Product Attributes:
    • California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
    • Freezing Point: -34
    • Recommended Dilution Ratio: No Dilution Required
    • Phosphate Free: Yes
    • Boiling Point at 50 50 Mixture: 229
  • for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
  • This item must be purchased in quantities of 6

Additional Fitment Information:
Vehicle
1970 - Audi 100 Series

Peak
  • PEAK OET European Extended Life Blue 50/50 Pre-diluted; 1 Gallon
  • This item must be purchased in quantities of 6

Additional Fitment Information:
Vehicle
1970 - Audi Super 90

Prestone
  • Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
  • Extended Life, Full Strength Concentrate
  • Product Attributes:
    • Biodegradable: No
    • California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
    • Freezing Point: -34
    • Recommended Dilution Ratio: 5 To 7
    • Phosphate Free: Yes
    • Ethylene Glycol: Yes
    • Boiling Point at 50 50 Mixture: 229
  • Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
  • This item must be purchased in quantities of 6

Additional Fitment Information:
Vehicle
1970 - Audi 100 Series

Motorad
  • Engine Oil Filler Cap
  • Product Attributes:
    • Meets or Exceeds Original Equipment Manufacture Specifications: Yes
    • Vented: No
    • Neck Diameter: 1.85 In
    • Shell Diameter: 2.65 In
  • Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

This Part Fits the Following OEM/Substitute Numbers:
06B103485C, 06B103485D, 14162, 703-1928, 8162, 8162-OC, 9MO162, DLA14701, MO162, NI, P8162

Additional Fitment Information:
Vehicle Block CC Engine CID
1970 - Audi Super 90 L 1760 4 Cyl 1.8L 107

K&N
  • Oil Filter
  • H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: .750 In. - 16
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 1.000 Lbs. (0.4 Kg)
    • Product Box Height: 5.630 In. (143mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.250 In. (83mm)
    • Package Material: Paperboard
    • Product Box Length: 3.250 In. (83mm)
    • PSI Relief Valve: 11-14
    • Outside Diameter: 3.000 In. (76mm)
    • Removal Nut: Yes
    • Item Height: 5.063 In. (129mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1970 - Audi Super 90 L 1760 4 Cyl 1.8L 107

Pro-Tec
  • PRO-TEC Spin-On Lube Filter
  • Master Pack Version; Oil Drain Intervals of up to 5000 miles
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.02
    • Capacity: 0.00
    • Burst Pressure: 410
    • Duty Type: Ld
    • Bypass Relief Valve Setting: 30
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Media Material: Synthetic
    • Class: D
    • Anti-Drain Back Valve: Yes
  • Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
1393, 181, 21393, 21393MP, 31393, 500101509, 51393, 51393XP, 61393, 61393BP, 618-51393, 618-51393MP, 8-51393, 84301, 85393, B0252, B0252MP, CF134...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1970 - Audi 100 Series L 1760 United States 4 Cyl 1.8L 107

Pro-Tec
  • PRO-TEC Spin-On Lube Filter
  • Oil Drain Intervals of up to 5000 miles
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.02
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 410
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 30
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)

This Part Fits the Following OEM/Substitute Numbers:
1393, 181, 21393, 21393MP, 31393, 500101509, 51393, 51393XP, 61393, 61393BP, 618-51393, 618-51393MP, 8-51393, 84301, 85393, B0252, B0252MP, CF134...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1970 - Audi 100 Series L 1760 United States 4 Cyl 1.8L 107

Pro-Tec
  • PRO-TEC Spin-On Lube Filter
  • Master Pack Version; Oil Drain Intervals of up to 5000 miles
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 2.921
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 350
    • BetaRatio: 2/20=6/20
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
1342, 136, 1718536, 21342, 21342MP, 2224509, 2224515, 51342, 61342, 61342BP, 618-51342, 618-51342MP, 8-51342, 85342, B7292, BF252, CF280, CF493...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1970 - Audi Super 90 L 1760 United States 4 Cyl 1.8L 107

Motorad
  • Engine Oil Filler Cap
  • Product Attributes:
    • Meets or Exceeds Original Equipment Manufacture Specifications: Yes
    • Vented: No
    • Neck Diameter: 1.79 In
    • Shell Diameter: 2.53 In
  • Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

This Part Fits the Following OEM/Substitute Numbers:
026103485A, 10079, 10115, 11079, 12C27, 14079, 2078-290332, 26103485, 31100, 703-1373, 8079, 9MO79, MO79, P8079, SO79

Additional Fitment Information:
Vehicle Block CC Engine CID
1970 - Audi 100 Series L 1760 4 Cyl 1.8L 107
Showing 1 - 10 of 24 products

Loading...