Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Nissan 610 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Nissan 610 |
- FRAM, PH8A, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Burst Pressure: 230.000
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 3.797
- Non Slip Grip: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- Micron Rating: 8.000
- Torque Nut: No
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
3645, 3I-1412, 6018, F76006, FF833, TP1049
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Nissan 620 |
- FRAM, HP1, Oil Filter
- FRAM HIGH PERFORMANCE High Performance Spin-on Oil Filter
- Product Attributes:
- Non Slip Grip: No
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 500.000
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Outside Diameter: 3.672
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.
This Part Fits the Following OEM/Substitute Numbers:
3120MP, 33120, 86120MP, BF7613, BF992, FF204
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Nissan 620 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.25 In
- Shell Diameter: 2.43 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10081, 10159, 11081, 12582066, 12604378, 12C29, 14081, 15610P2EA00, 15610P2EA01, 15610P5GA00, 15610P5GA01, 15610PC6000, 15610PY3003, 1692060B02, 1692060B03, 1692060B04, 1692086501, 1692086502...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Nissan 710 | L | 1952 | 4 Cyl 2.0L | - |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.234
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 340
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1361, 150, 21361, 21361MP, 31361, 397, 5001202796, 51361, 61361, 61361BP, 618-51361, 618-51361MP, 8-51361, 85361, 85361HD, AA3682, B4457, B4457MP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1975 - Nissan B210 | L | 1393 | Canada | 4 Cyl 1.4L | 85 |
- Oil Filter
- H-5.719 in.; OD-3.656 in.; 3/4 In.-16UNF-2B Thread; psi Relief Valve 8-11
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.300 Lbs. (0.6 Kg)
- Product Box Height: 6.130 In. (156mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 5.719 In. (145mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Nissan 260Z |
- Oil Filter
- H-5.719 in.; OD-3.656 in.; 3/4 In.-16UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut~Excludes 1 Quart Cartridge Type
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.300 Lbs. (0.6 Kg)
- Product Box Height: 6.130 In. (156mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 5.719 In. (145mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
005557147R91, 028115561B, 068115561B, 068115561E, 105548, 1220193, 122P193, 1328691, 1520865002, 1520865011, 15208W1120, 15208W1123, 15208W3401, 1540232091, 1560041010, 156007600371, 156017800171, 156017810171...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Nissan 710 | L | 1952 | 4 Cyl 2.0L | - |
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.234
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 340
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 320, 0 986 452 023, 0 986 452 552, 0 986 452 929, 0 986 AF0 273, 0 986 AF1 052, 00013505344, 02/630225, 0410621, 0410699, 0410731, 047195, 0709390126, 0986627616, 10-01-111, 1000983, 103144, 1050983...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1975 - Nissan B210 | L | 1393 | Canada | 4 Cyl 1.4L | 85 |
- Cut to Length, 16"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 50
- 600
- End 1 Inside Diameter:
- .625
- 16
- End 2 Inside Diameter:
- .625
- 16
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1975 - Nissan 620 | L | 1952 | Valve To Engine | GAS | 4 Cyl 2.0L | - |
Showing 1 - 10 of 130 products
Loading...