Image
Product
Price
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 191
- 7.5
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .62
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10801, 14-2642-8, 1405555M05, 1405640F00, 14108S, 15984158, 1626138010, 18801, 24500341, 25515149, 25524572, 25535149, 3034, 3041, 43029, 63029, 642218, 642230...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Toyota Pickup | L | 2189 | Engine To Carburetor | GAS | 4 Cyl 2.2L | - |
- Cut to Length, 11"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 8.25 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .5
- 13
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
06A121497AA, 06A121497E, 09551D100, 100799100C, 10378155, 12608670, 12787736, 140551FJ0A, 14055EW600, 15077095, 15077147, 15181119, 15257756, 15710551, 15727309, 15763280, 15763290, 15834774...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Toyota Land Cruiser | L | 4227 | Engine To Pipe-3 | GAS | 6 Cyl 4.2L | - |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10007473, 10014215, 10014330, 10014332, 10014672, 1007473, 10157913, 118658, 14052460, 14052473, 14100798, 15555229, 15642507, 1594657, 15963868, 15963869, 16198M, 1641237...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Toyota Land Cruiser | L | 4227 | Valve To Engine | GAS | 6 Cyl 4.2L | - |
- Cut to Length, 31"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Toyota Pickup | L | 2189 | Valve To Engine | GAS | 4 Cyl 2.2L | - |
- W/O Oil Cooler; Cut to Length, 20"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Toyota Land Cruiser | L | 4227 | Pipe-2 To Engine | GAS | 6 Cyl 4.2L | - |
- W/Eng. Oil Cooler; Cut to Length, 11"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Toyota Land Cruiser | L | 4227 | Pipe-2 To Engine | GAS | 6 Cyl 4.2L | - |
- Antifreeze/Coolant
- OE #00272-1LLAC, 00272-1LLAC-01, 00272-SLLC2
- Asian Vehicle Red Antifreeze/Coolant Ready-to-Use 1 GA
- Asian Vehicle Red Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Meets the following OEM and industry specifications: JIS K 2234-1994, Hyundai/KIA MS 591-08, Mitsubishi ES-64217, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- ZEREX™ Asian Vehicle Antifreeze/Coolant is specifically formulated to meet the requirements of Asian vehicle manufacturers (Toyota®, Lexus®, Scion® and others) requiring a red, silicate free Hybrid Organic Acid Technology (HOAT) with a phosphate additive. This patented formula is designed to replace the original fluid and provides protection from rust, corrosion, boil overs and freezing.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Toyota Pickup |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio: No Dilution Required
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: 50/50
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula.
- Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Toyota Corolla |
- Antifreeze/Coolant
- Dex-Cool® Antifreeze/Coolant Concentrate 1 GA
- Dex-Cool Orange Concentrate - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- 50/50
- Concentrate
- Flash Point - Deg. F: 212 -
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Concentrate
- Flash Point - Deg. C: 100 -
- Freeze Point - Deg. C: -36
- Type: Organic Acid Technology (oat)
-
Features:
- Silicate and Phosphate Free formula
- ZEREX™ Dex-Cool® Antifreeze/Coolant is automaker approved for use in GM® vehicles which require OAT Dex-Cool. Meets or exceeds the following industry specifications: ASTM D3306, SAE J1034, J814, J1941, TMC of ATA RP-302B, AND Federal Specification A-A-870A.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Toyota Cressida |
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- 3/4-16"
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- Spin-On Adapter Ports Up Filter Mount Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Remote filter thread size: 3/4-16
- Adapter inlet size: 1/2 Npt
- Remote filter inlet size: 1/2 Npt
- Remote filter landing: 2-1/2, 2-3/4, 3-1/2
- Adapter thickness: 1-3/4, 2
-
Features:
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- This Universal single filter kit allows oil filter to be relocated to a convenient, easy-access location. Includes a high quality, die cast aluminum 1/2" NPT ports up filter mount and a 1/2" NPT ports spin-on adapter with most everything you need for an easy installation. Filter mount uses Fram PH8A Oil Filter or equivalent. Designed to fit most passenger vehicles on the road today with 2 1/2" to 3 1/2" oil filter landings. Spin-on adapters provide external oil lines to allow the addition of an engine oil cooler and/or remote filter mount, installing at the stock engine oil filter location. This all-new version has a billet style look and has an ultra-bright, polished appearance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Toyota Corona | L | 2189 | 4 Cyl 2.2L | - |
Showing 1 - 10 of 249 products
Loading...