Image
Product
Price
- Engine Valve Cover Gasket Set
- Valve Cover Grommets Included PermaDry Molded Rubber Gasket(s) Included
- FEL-PRO VS 50251 R-1 Engine Valve Cover Gasket Set for Nissan Xterra
- Product Attributes:
- Grade Type: Premium
- Configuration: One Piece
- Gasket Sealant Included: No
-
Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM -- Proprietary cork-rubber formulation
- SUPERIOR SEAL -- Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
0361356, 151094301, 19566, 636007, AVC517S, CV1271, VS38376A
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - INFINITI M30 | V | 2960 | 6 Cyl 3.0L | 181 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
0002030702, 0588220, 0982656, 09913360, 101681, 101684, 1022789, 1101681, 112, 14-2186-4, 1405560U10, 142-0207, 1565137, 1592, 1657316020, 18-70704, 1B16597H01, 1J0122101CC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1990 - INFINITI Q45 | V | 4494 | Lower - Engine To Pipe | GAS | 8 Cyl 4.5L | - |
- Antifreeze/Coolant
- Asian Vehicle Red Antifreeze/Coolant Ready-to-Use 1 GA
- Asian Vehicle Red Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Meets the following OEM and industry specifications: JIS K 2234-1994, Hyundai/KIA MS 591-08, Mitsubishi ES-64217, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- ZEREX™ Asian Vehicle Antifreeze/Coolant is specifically formulated to meet the requirements of Asian vehicle manufacturers (Toyota®, Lexus®, Scion® and others) requiring a red, silicate free Hybrid Organic Acid Technology (HOAT) with a phosphate additive. This patented formula is designed to replace the original fluid and provides protection from rust, corrosion, boil overs and freezing.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - INFINITI Q45 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio: No Dilution Required
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: 50/50
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula.
- Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - INFINITI Q45 |
- Antifreeze/Coolant
- Dex-Cool® Antifreeze/Coolant Concentrate 1 GA
- Dex-Cool Orange Concentrate - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- 50/50
- Concentrate
- Flash Point - Deg. F: 212 -
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Concentrate
- Flash Point - Deg. C: 100 -
- Freeze Point - Deg. C: -36
- Type: Organic Acid Technology (oat)
-
Features:
- Silicate and Phosphate Free formula
- ZEREX™ Dex-Cool® Antifreeze/Coolant is automaker approved for use in GM® vehicles which require OAT Dex-Cool. Meets or exceeds the following industry specifications: ASTM D3306, SAE J1034, J814, J1941, TMC of ATA RP-302B, AND Federal Specification A-A-870A.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - INFINITI Q45 |
- Antifreeze/Coolant
- OE #999MP-L25500P
- Asian Vehicle Blue Antifreeze/Coolant Ready-to-Use 1 GA
- Asian Vehicle Blue Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Meets the following OEM and industry specifications: Hyundai/KIA MS 591-08, Mitsubishi ES-64217, JIS K 2234-1994, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- ZEREX™ Asian Vehicle Antifreeze/Coolant is specifically formulated to meet the requirements of Asian vehicle manufacturers (Honda®, Nissan®, KIA®, Hyundai® and others) requiring a blue, silicate free Hybrid Organic Acid Technology (HOAT) with a phosphate additive. This patented formula is designed to replace the original fluid and provides protection from rust, corrosion, boil overs and freezing.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - INFINITI Q45 |
- OE Coolant is Green OE Match
- PEAK OET Asian Extended Life Green 50/50 Pre-Diluted; 1 Gallon
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - INFINITI Q45 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio:
- 5 To 7
- 50:50
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: Concentrate
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula
- Includes patented Prestone CorGuard technology, our best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - INFINITI Q45 |
- Antifreeze/Coolant
- Dex-Cool® Antifreeze/Coolant Ready-to-Use 1 GA
- Dex-Cool Orange Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type: Organic Acid Technology (oat)
-
Features:
- Silicate and Phosphate Free formula
- ZEREX™ Dex-Cool® Antifreeze/Coolant is automaker approved for use in GM® vehicles which require OAT Dex-Cool. Meets or exceeds the following industry specifications: ASTM D3306, SAE J1034, J814, J1941, TMC of ATA RP-302B, AND Federal Specification A-A-870A.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - INFINITI Q45 |
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- 3/4-16"
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- Spin-On Adapter Ports Up Filter Mount Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Remote filter thread size: 3/4-16
- Adapter inlet size: 1/2 Npt
- Remote filter inlet size: 1/2 Npt
- Remote filter landing: 2-1/2, 2-3/4, 3-1/2
- Adapter thickness: 1-3/4, 2
-
Features:
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- This Universal single filter kit allows oil filter to be relocated to a convenient, easy-access location. Includes a high quality, die cast aluminum 1/2" NPT ports up filter mount and a 1/2" NPT ports spin-on adapter with most everything you need for an easy installation. Filter mount uses Fram PH8A Oil Filter or equivalent. Designed to fit most passenger vehicles on the road today with 2 1/2" to 3 1/2" oil filter landings. Spin-on adapters provide external oil lines to allow the addition of an engine oil cooler and/or remote filter mount, installing at the stock engine oil filter location. This all-new version has a billet style look and has an ultra-bright, polished appearance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - INFINITI Q45 | V | 4494 | 8 Cyl 4.5L | - |
Showing 1 - 10 of 128 products
Loading...