Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Suzuki XL-7 | V | 3564 | 6 Cyl 3.6L | - |
- Integrated Thermostat Housing Assembly
- Cover Includes Thermostat
- Product Attributes:
- Flange Length: 2.21
- Bolt Hole Center To Bolt Hole Center: 3.09
- Thermostat Included:
- Oui
- Sí
- Yes
- Outlet Port Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Bleeder Hole:
- Oui
- Sí
- Yes
- Flange Thickness: 0.433
- Mounting Hole Quantity: 2
- Inside Diameter:
- 0.303
- 1.175
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Temperatura de apertura del termostato: 192gradosf
- Thermostat Opening Temperature: 192 Deg. F
- Gasket Type:
- Gasket
- Junta
- Color:
- Plateado
- Silver
- Flange Width: 3.68
- Contenidos del paquete: 1 Salida De Agua, 1 Termostato, 1 Junta Del Termostato, 2 Cajas, 1 Sello Tipo O
- Material:
- Aluminio
- Aluminum
-
Features:
- Ideal replacement - this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
- This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
This Part Fits the Following OEM/Substitute Numbers:
143-0870, 147-0005, 147-0054, 15-80783, 2726, 34712, 49539, 582-192, 58292, 6278, 6282, 815635, 85635, 96282726, 96407677, KGT-2726-NT, KGT-2726-T, TG-278...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Suzuki Swift+ | L | 1598 | 4 Cyl 1.6L | 98 |
- Engine Timing Chain Kit
- Sprockets Included without Variable Valve Timing (VVT) Sprocket
- Product Attributes:
- Timing Chain Type: Primary-inverted Tooth, Secondary-inverted Tooth
-
Features:
- Timing Chain Kits includes all components for a quick and efficient replacement
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience; Utilizes the latest in design and technology to offer a complete chain kit solution; Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance; CAD designed and manufactured using premium materials; Refer to our online catalog for detailed application-specific information
This Part Fits the Following OEM/Substitute Numbers:
90753S
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Suzuki XL-7 | V | 3564 | 6 Cyl 3.6L | - |
- Relief pressure 15 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10248, 10248ST, 10575118, 11248, 12R27, 13502354, 15042975, 15066786, 15075118, 1678-290343, 17046, 20898801, 22652695, 22671020, 31532, 703-1711, 7046, 902-5601...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Suzuki XL-7 | V | 3197 | 6 Cyl 3.2L | 195 |
- Includes: Water Pump, Timing Belt, Camshaft Belt Tensioner, Camshaft Belt Idler Interference Engine Water Pump Driven by Timing Belt
This Part Fits the Following OEM/Substitute Numbers:
GTKWP335, TB335LK1, TCKWP335, WPK-0061, WPK43540
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Suzuki Swift+ |
- MAIN BEARING SET For SUZUKI J18K, J20A
- MAIN BEARING SET For SUZUKI J18K, J20A; bimetal (aluminum base)
- Product Attributes:
- Undersize: Std
- Material: Bimetal (aluminum Base)
This Part Fits the Following OEM/Substitute Numbers:
12340-85FB0-OAO, 12340-85FB2-OAO, 12340-85FB3, H1277/5 STD
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Suzuki SX4 |
- MAIN BEARING SET For SUZUKI J18K, J20A
- bimetal (aluminum base) STD
- MAIN BEARING SET For SUZUKI J18K, J20A; bimetal (aluminum base)
- Product Attributes:
- Undersize: Std
- Material: Bimetal (aluminum Base)
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Suzuki SX4 | L | 1997 | - | 4 Cyl 2.0L | 122 |
- W/Rear A.C.; Cut to Length, 5"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Suzuki XL-7 | V | 3564 | Tee-3 To Engine | GAS | 6 Cyl 3.6L | - |
- W/Rear A.C.; Cut to Length, 5"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Suzuki XL-7 | V | 3564 | Tee-2 To Engine | GAS | 6 Cyl 3.6L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Suzuki XL-7 | V | 3564 | Pipe-3 To Engine | GAS | 6 Cyl 3.6L | - |
Showing 1 - 10 of 387 products
Loading...