Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Jaguar XF | L | 1999 | 4 Cyl 2.0L | Base | 122 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jaguar XF |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jaguar XFR |
- FRAM, XG3614, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 310.000
- Replaceable Filter: No
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 2.984
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
5214435, AF27, B23145, BE-231, FB100
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Jaguar XF | L | 1999 | 4 Cyl 2.0L | 122 |
- FRAM, PH3614, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.500
- Non Slip Grip: Yes
- Gasket Thickness: 0.078
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Base
- Gasket Type: Base
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 2.984
- Gasket Outside Diameter: 2.859
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
2900535100, 600-211-6240, A44081, B236, LF283, LF3415, PF2158, RV-51
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Jaguar XF | L | 1999 | 4 Cyl 2.0L | 122 |
- WIX Spin-On Lube Filter
- Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 275
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
1348MP, 21348MP, 332145564, 3612413, 51348MP, 61348BP, 618-51348MP, 70001403, 7020215, 85348MP, B241MP, OP 618, PH2835B, PH3614FP, R85348MP, V241BP
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2013 - Jaguar XF | L | 1999 | Mexico | 4 Cyl 2.0L | Turbocharged | 122 |
- PEAK OET European Extended Life Pink 50/50 Pre-diluted; 1 Gallon
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jaguar XJ |
- Integrated Thermostat Housing Assembly
- Cover Includes Thermostat
- Product Attributes:
- Bolt Hole Center To Bolt Hole Center:
- 2.16
- 2.882
- 1.965
- Flange Length: 3.33
- Thermostat Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Thermostat Housing; 1 Thermostat Assembly
- Bleeder Hole: No
- Flange Thickness: 0.46
- Mounting Hole Quantity: 3
- Inside Diameter: 1.1
- Thermostat Opening Temperature: 180 Deg. F
- Gasket Type: Gasket
- Flange Width: 2.6
- Bolt Hole Center To Bolt Hole Center:
-
Features:
- Ideal replacement - this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
- This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
This Part Fits the Following OEM/Substitute Numbers:
34782, 7317, 86114, 910-180, 91080, AG9Z8575B, JDE28115, LR027158
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Jaguar XF | L | 1999 | 4 Cyl 2.0L | 122 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 13Mm
- 13 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Thread Size: M14-1.50
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 5 Oil Drain Plugs
- Head Size (SAE/Metric): 13 Mm
- Magnetic: No
- Length: 0.838
- Thread Type: Fine
- Oversized Thread: No
- Bolt Grade: 3
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
1013938, 1040, 1054, 1066, 11970pk, 323528, 6506214AA, 6507741AA, 68094567AA, 7B0103193, 80-06, 80-26, AJ83017, AJ88461, F6TZ6730BA, LF1310404, YF091046Y, ZZM210407...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Jaguar XFR-S | V | 5000 | 8 Cyl 5.0L | - |
- Oil Drain Plug Pilot Point M12-1.75, Head Size 15Mm
- 15 mm Head M12 x 1.75 Thread Gasket Included Package Quantity: 1 Dorman - AutoGrade - Oil-Tite! - Clamshell Packaging Type: Clamshell Thread Pitch: 1.75 Multi-Fit
- Product Attributes:
- Thread Size: M12x1.75
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 1 Drain Plug; 1 Gasket
- Head Size (SAE/Metric): 15 Mm
- Magnetic: No
- Thread Type: Metric
- Oversized Thread: No
- Bolt Grade: 5.8
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Program: Universal Oil
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
10017615, 10055425, 11518377, 11519408, 1151A78J01, 12552966, 24100042, 3522351, 3536964, 3538469, 652116, 8100176150, 8115183770, 8115194080, 8132293, 8241000420, 88891787, 9L8Z6730A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Jaguar XF | L | 1999 | 4 Cyl 2.0L | 122 |
Showing 1 - 10 of 363 products
Loading...