Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chrysler 300 | V | - | 8 Cyl 5.7L | C | 345 |
- Engine Valve Cover Gasket Set
- Includes Spark Plug Tube Seals Valve Cover Grommets Not Included PermaDry Molded Rubber Gasket(s) Included
- FEL-PRO VS 50625 R Engine Valve Cover Gasket Set for Ram 1500
- Product Attributes:
- Grade Type: Premium
- Configuration: One Piece
- Gasket Sealant Included: No
- Mounting Hole Quantity: 0
-
Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM -- Proprietary cork-rubber formulation
- SUPERIOR SEAL -- Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
151070501, 190030, 5114179AB, VS10305, VS50380
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chrysler 300 | V | - | 8 Cyl 5.7L | 345 |
- Relief pressure 18 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10234, 10234ST, 12R10, 1678-290336, 17018, 380176, 4546255, 4596198, 5058394AF, 5103533AA, 52027793, 52028860AA, 52028860AB, 52028974AA, 52029799AA, 52079691AA, 55111361AA, 55116897AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chrysler 300 | V | 3604 | 6 Cyl 3.6L | 220 |
- Oil Cooler Outlet Hose
- Outlet
- Product Attributes:
- Coolant Hose Type:
- Simple
- Single
- Hose End 1 Outside Diameter: 23.5
- Hose End 2 Inside Diameter: 18
- Coolant Hose Heat Shield Included:
- No
- Non
- Contenidos del paquete: 1 Manguera De Refrigerante
- Maximum Working Pressure: 100
- Coolant Hose Color:
- Black
- Negro
- Noir
- Material:
- Epdm
- Metal
- Branch 1 Outside Diameter: 23.5
- Hose End 2 Outside Diameter: 26
- Coolant Hose Type:
-
Features:
- Direct replacement - this replacement engine coolant hose is designed to match the fit and function of the original on specified makes, years and models
- Restores functionality - reliable replacement for an original hose that is leaking or has lost pressure due to heat and fatigue
- Durable construction - made from quality materials for reliable service
- Trustworthy quality - backed by a team of product experts in the United States and more than a century or automotive experience
- This replacement engine coolant hose is designed to match the fit and function of the original on specified makes, years and models, and is engineered for reliable performance and durability.
This Part Fits the Following OEM/Substitute Numbers:
68057473AA, 68057473AB, 68057473AC, 68057473AD, 68057473AE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Chrysler 300 | V | 3604 | Engine Oil Cooler | 6 Cyl 3.6L | 220 |
- Rear; Includes 2 MDS Lifters And Tray
- Engine Valve Lifter/Tray Kit; Rear; Includes 2 MDS Lifters And Tray;
- Engine Valve Lifter/Tray Kit
-
Features:
- Engine Valve Lifter/Tray Kit
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - Chrysler 300 | C |
- Lower; Models w/V6 Engine
- Engine Gasket Set; Lower; Models w/V6 Engine;
- Engine Gasket Set
-
Features:
- Engine Gasket Set
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chrysler 300 | V | 3604 | 6 Cyl 3.6L | Limited | 220 |
- Front; Includes 2 MDS Lifters/And Tray
- Engine Valve Lifter/Tray Kit; Front; Includes 2 MDS Lifters/And Tray;
- Engine Valve Lifter/Tray Kit
-
Features:
- Engine Valve Lifter/Tray Kit
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - Chrysler 300 | C |
- Models w/Pentastar Engine; Includes All Seals For Oil Filter And Adapter
- Engine Oil Filter Adapter O-Ring Kit; Models w/Pentastar Engine; Includes All Seals For Oil Filter And Adapter;
- Engine Oil Filter Adapter O-Ring Kit
-
Features:
- Engine Oil Filter Adapter O-Ring Kit
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - Chrysler 300 | Touring |
- Engine Cylinder Head Bolt Set
- Head Bolts with Washers Replacement recommended
- FEL-PRO ES 72200 Engine Cylinder Head Bolt Set for Ram 1500
- Product Attributes:
- :
- 131mm (bolt 1); 42mm (bolt 2)
- 15mm (bolt 1); 10mm (bolt 2)
- Head Bolts W/washers; Replacement Recommended
- Reusable: No
- Bolt Thread Pitch: 1.50 (bolt 1); 1.25 (bolt 2)
- Assembly Lubricant Included: No
- Grade Type: Premium
- Bolt Thread Length: 84mm (bolt 1); 41mm (bolt 2)
- Head Drive Type: Hex
- Bolt Diameter: 12mm (bolt 1); 8mm (bolt 2)
- :
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
141008701, GS33429, MM23607
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chrysler 300 | V | - | 8 Cyl 5.7L | 345 |
- Engine Air Intake Hose
- Product Attributes:
- Grade Type: Regular
- Inlet Diameter: 3.6
- Configuration:
- One Piece
- Una Pieza
- Manguera moldeada: Sí
- End 2 Inside Diameter: 3.6
- Clamps Included:
- Oui
- Sí
- Yes
- Molded Hose:
- Oui
- Yes
- Inside Diameter: 3.1
- Shape:
- Ensamble Moldeado
- Molded Assembly
- End 2 Shape:
- Ensamble Moldeado
- Molded Assembly
- Color:
- Black
- Negro
- Noir
- Hose Port Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Centerline Length: 41
- Contenidos del paquete: 1 Manguera De Admisión De Aire
- End 1 Inside Diameter: 3.1
- End 1 Shape:
- Ensamble Moldeado
- Molded Assembly
- Material:
- Caucho
- Élastomère
- Rubber
- Outlet Diameter: 3.1
-
Features:
- Direct replacement - fits and functions like original equipment
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.
This Part Fits the Following OEM/Substitute Numbers:
4861926AD, 4861926AE, 4861926AF, 4861926AG
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Chrysler 300 | V | 3604 | Air Cleaner To Engine | 6 Cyl 3.6L | 220 |
Showing 1 - 10 of 395 products
Loading...