Shop By Product Matching "Engine"
Choose a Model for your 2020 Ford
Image
Product
Price
- Oil Filter
- H-4.0 in.; OD-3.656 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 Special Thread X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04884899AB, 04884899AC, 05038041AA, 51372, 872025, 89017527, B329, F1AZ6714A, F1AZ6731BD, FL820, FL820S, L24651, M1210, M1210A, OD5419, PF1250, PH2, PH8A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Ford F-350 Super Duty | V | 7292 | 8 Cyl 7.3L | XL | 445 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ford Escape |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ford Edge |
- 2015-21 Ford F-150 All Engines
- Updates Via Internet To a Full Function Max Energy Power Programmer;CARB E.O. D-260-46
- Speed Calibrator for 2015 Ford F-150 All Engines
- Speedometer/Odometer Recalibration Programmer
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm. Visit Www.p65warnings.ca.gov
-
Features:
- Reads/Displays/Clears Diagnostic Trouble Codes
- Easy Plug-And-Play Installation
- Correct Speedometer For Tire Sizes From 24-54 in.
- Corrects Rear Gear Ratios From 2:73-4:56
- Hypertech's Speedometer Calibrator can correct the speedometer for tires up to 54 inches (depending on the application). Simply plug in the Speedometer Calibrator into the vehicle's diagnostic port under the dash, select the tire height and/or new rear gear ratio that has been installed, and the vehicle's computer is reprogrammed for accurate speedometer readings (as required by law). The Speedometer Calibrator also reads/displays/clears DTCs and is internet updateable. The Speedometer Calibrator is emissions certified 50-state legal (application specific).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Ford F-150 | V | - | 6 Cyl 2.7L | XL | 164 |
- 2015-21 Ford F-150 All Engines
- Updated Via Internet;CARB E.O. D-260-46
- Speed Calibrator for 2015 Ford F-150 All Engines
- Speedometer/Odometer Recalibration Programmer
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm. Visit Www.p65warnings.ca.gov
-
Features:
- Reads/Displays/Clears Diagnostic Trouble Codes
- Easy Plug-And-Play Installation
- Correct Speedometer For Tire Sizes From 24-54 in.
- Corrects Rear Gear Ratios From 2:73-4:56
- Hypertech's Speedometer Calibrator can correct the speedometer for tires up to 54 inches (depending on the application). Simply plug in the Speedometer Calibrator into the vehicle's diagnostic port under the dash, select the tire height and/or new rear gear ratio that has been installed, and the vehicle's computer is reprogrammed for accurate speedometer readings (as required by law). The Speedometer Calibrator also reads/displays/clears DTCs and is internet updateable. The Speedometer Calibrator is emissions certified 50-state legal (application specific).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Ford F-150 | V | - | 6 Cyl 2.7L | XL | 164 |
- Thermostat-195 Degrees
- Temperature 195F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
13254, 13779, 14989, 15779, 1601-290267, 228-195JV, 22896, 262, 33469, 34058, 35779, 369-195, 3779, 3L3Z8575AA, 3L3Z8575AC, 46359, 49359, 7L3Z8575B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford F-350 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- Thermostat-180 Degrees
- Temperature 180F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T19DJ, 13778, 13968, 1601-290266, 162, 228-180JV, 22881, 33468, 33468S, 3778, 9228180JV, P3778, S377180, XL3Z8575AA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford F-350 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- Integrated Housing Thermostat-180 Degrees
- Temperature 185F Includes housing, thermostat, and seal OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Mounting Hardware Included: No
- Bolt Hole Quantity: 3
- Jiggle Pin Included: Yes
- Gasket/Seal Material: Rubber
- Start to Open Temperature: 180
- Installation Tool Included: No
- Number Of Outlet Ports: 2
- Temperature: 180
- Bolts Included: No
- Opening Temperature: 180
- Outlet Diameter: 1.30 In; 0.74 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-316621, 1F7015171B, 3M4Z8575AB, 3M4Z8575B, 439-180, 47685, 48708, 512-185, 51280, 85689, 85980, 902-733, 9512185, L32715170A, L33615170, L35715170B, P51280, RT1193...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford Fusion | L | 2488 | 4 Cyl 2.5L | 152 |
- Engine Coolant Reservoir Cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Valve OD: 1.30 In
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10238, 10238ST, 11238, 12R20, 1678-290338, 17038, 1M5Z8A080AA, 1W1Z8100AA, 217237S000, 217239FD0A, 31406, 3S4Z8A080AA, 3S4Z8A080AB, 3S4Z8A080AC, 5S4Z8101AA, 5S4Z8A080AA, 703-1726, 7038...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford Lobo | V | 3496 | 6 Cyl 3.5L | 213 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.39 In
- Shell Diameter: 2.74 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10117, 10117ST, 11117, 12590905, 12C47, 14119, 1F1Z6766AA, 1L2Z6763AA, 1L2Z6766AA, 1L5Z6763AA, 2078-328160, 2L3Z6582AA, 2L3Z6582CA, 2L3Z6582DA, 2L3Z6582FA, 2L3Z6582FB, 31275, 4C2Z6582CA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford F-350 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
Showing 1 - 10 of 654 products
Loading...