Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Acura TLX |
- OE Coolant Color is Blue OE Match
- PEAK OET Asian Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Acura MDX |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio: No Dilution Required
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: 50/50
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula.
- Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Acura RDX |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio:
- 5 To 7
- 50:50
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: Concentrate
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula
- Includes patented Prestone CorGuard technology, our best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Acura Integra |
- Engine Coolant Thermostat Housing Seal
- FEL-PRO 35162 Engine Coolant Thermostat Housing Seal for Honda Pilot
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
112911, 112921, 12581520, 19305-PR7-A00, 19305PR7A00, 711535700, C31207
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Acura MDX | V | 2997 | 6 Cyl 3.0L | - |
- WIX Air Filter Panel
- Original Equipment Part Number 17220-6S9-A01
- Product Attributes:
- Duty Type: Ld
- Media Material: Synthetic
- Class: A
- WIX Premium Panel Air Filters provide excellent engine protection for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM air filter change intervals. These filters contain 30% more media than OES filters and use a phenolic resin treated enhanced cellulose media which provides excellent durability against moisture ingestion. When applicable, the high-tear strength polyurethane seal survives extreme hot and cold temperature conditions. Air filter Laboratory Tests per ISO 5011 at least 99.5% efficiency (Based on Wix 42389)
This Part Fits the Following OEM/Substitute Numbers:
17220-6S9-A01, 201654, A31830, WA11654
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2024 - Acura TLX | V | 2997 | United States | 6 Cyl 3.0L | - |
- Relief pressure 16 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10233, 10233ST, 12R8, 1350A730, 1640162090, 1678-29300, 17167, 1793282Z00, 214301P111, 253301P000, 253303K000, 253303Z000, 253304H000, 4495805, 45137AE003, 45137AE00B, 45137AE01A, 7516...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Acura MDX | V | 2997 | 6 Cyl 3.0L | - |
- Engine Splash Shield Pin Kit
- Dorman - OE Solutions Packaging Type: Box Package Quantity: 6
- Product Attributes:
- Color/Finish:
- Plateado
- Silver
- Fastener Length (In): 16.5 Mm
- Tamaño del orificio del sujetador (in): 6.1 Mm
- Fastener Head Diameter (In): 20 Mm
- Fastener Hole Size (in): 6.1 Mm
- Fastener Type:
- Screw On
- Tornillo Puesto
- Bolt Length: 16.5
- Bolt Grade:
- Reemplazo Estándar
- Standard
- Bolt Thread Type:
- Coarse
- Grueso
- Bolt Thread Length: 13.6
- Bolt Thread Diameter: 11
- Diámetro de la cabeza del sujetador (in): 20mm
- Bolt Color:
- Plateado
- Silver
- Contenidos del paquete: 6clavijas De Tornillos Del Guardabarros
- Longitud del sujetador (in): 16,5 Mm
- Material:
- Aleación De Zinc
- Zinc Alloy
- Color/Finish:
-
Features:
- Ideal replacement - this splash shield hardware is a direct replacement for original equipment retainers
- Durable construction - made of quality materials for reliable service
- Cost-effective solution - offers original equipment quality at competitive price
- Multiple uses - this hardware is suitable for a variety of automotive and commercial uses
- Engine shield dragging because of broken or missing retainers? This engine splash shield hardware is an exact match to replace original equipment hardware. Made of quality materials, this hardware has been tested for precise fit.
This Part Fits the Following OEM/Substitute Numbers:
90674TY2A01
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Acura Integra |
- Engine Water Pump Gasket
- FEL-PRO 35677 Engine Water Pump Gasket for Honda Pilot
- Product Attributes:
- Grade Type: Premium
- Mounting Hole Quantity: 0
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
123521, 12581518, 19222-P8A-A01, 19222-P8A-A02, 19222-R70-A11, 19222P8AA01, 19222P8AA02, 19222R70A11, 711523400, K17818, WP9717
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Acura MDX | V | 2997 | 6 Cyl 3.0L | - |
- Polished SP Aluminum Series Air Intake System
- SP Aluminum Series Cold Air Intake System, Part No. SP1586P, 2022-2024 Honda Civic/Civic Si L4-1.5L (t), 2023-2024 Acura Integra L4-1.5L (t)
- Injen SP Cold Air Intake System
- Product Attributes:
- Tube Material: T6-6061 Mandrel-bent Aluminum Intake Tubing
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Filter Media: Dry Supernano-web
- Intake Color: Polished
- TQ Gain: Base: 11 / Si/integra: 9
- Heat Shield Included: No
- Black Hydroshield (Optional): 1033blk
- Patented Air Fusion Incorporated: Yes
- Filter Color: Blue
- Replacement Filter Part Number: X-1014-bb
- Compatible Throttle Controller: Pt0018b
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): 1033red
- Prop 65 (C, R or CR): Cr
- HP Gain: Base: 10 / Si/integra: 10
-
Features:
- Dyno Proven gains for each Civic model:
- Base Civic ? 10 hp and 11 lb-ft. of torque
- Civic Si/Integra - 10 hp and 9 lb-ft. of torque
- True Cold Air Intake Design
- Manufactured from 2.50in and 3.00in Mandrel-Bent 6061-T6 aluminum intake tubing
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- No additional and expensive tuning required
- Smooth intake piping eliminates restrictions and improves airflow
- Aggressive engine tone under full throttle
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1014-BB
- Optional Hydroshield part number 1033BLK or 1033RED
- Available in multiple finishes
- SP1586P (Polished)
- SP1586WB (Wrinkle Black)
- SP1586WR (Wrinkle Red)
- Injen Front Mount intercooler coming soon: FM1586i
- Injen Charge Pipes: SES1586ICP
- Injen X-Pedal Throttle Response Controller: PT0018
- Proudly made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you'll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in amazing finishes, SP1586P (Polished), SP1586WB (Wrinkle Black), and finally SP1586WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2024 - Acura Integra | L | 1497 | 4 Cyl 1.5L | Turbocharged | - |
Showing 1 - 10 of 92 products
Loading...