Shop By Product Matching "Exhaust"
Choose a Model for your 2008 Chrysler
Image
Product
Price
- Champion Iridium- Boxed - REC12WMPB5
- 2 Plugs Per Cylinder Required For Lower Bank Only Gap 0.050in OE Type ; Plug Type REC12WMPB5
- Champion Iridium 9055 Spark Plug (Carton of 4)
- Champion Iridium
- Product Attributes:
- Hex Size:
- 0.625
- 16.000
- Center Electrode Tip Material: Iridium
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Tip Design: J Gap
- Pre-Gap Size:
- 0.051
- 1.3
- Classification: Champion Iridium
- Ground Electrode Core Material: Platinum
- Insulator Height: 0.12
- Plug Type: Rec12wmpb5
- Hex Size:
- Champion® Iridium - the ultimate element. This spark plug's fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
FR8T1332, REC12WMPB5, SPLZFR5B13EG
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2008 - Chrysler Aspen | V | - | Exhaust Side | 8 Cyl 4.7L | 287 |
- Band Style
- Exhaust Clamp; Band Style;
- Exhaust Clamp
-
Features:
- Exhaust Clamp
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler Pacifica | Exhaust Pipe To Muffler |
- Valve Guide Seal; Exhaust or Intake;
- Valve Guide Seal
-
Features:
- Valve Guide Seal
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - Chrysler Pacifica | V | 3778 | Exhaust | 6 Cyl 3.8L | LX | 231 |
- NGK Laser Platinum Spark Plug
- Dual Plug; Exhaust Side; 8 Req'd (8 Intake Side Plugs Also Req'd) Gap 0.051" OE Equivalent Design 102,000 mi OE Mfr Recommended Service Interval
- Laser Platinum Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.20
- 5.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Plzfr5b13eg
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Plzfr5b13eg
- Resistor Type: Yes
- Stock Number: 97606
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .052
- 1.3
- Ground Electrode Core Material: Copper
- Material Grade: Double Platinum
- Center Electrode Projection: Long Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 1.043
- 26.5
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 10000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
- NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
4505, 4703, 6734, 68022888AA, 9055, 97606, FR8SPP30X, FR8TI332, IKH16TT, PKH16TT, SPLZFR5B13, XP6003
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2008 - Chrysler Aspen | V | - | Exhaust Side | 8 Cyl 4.7L | 287 |
- Band Style
- Exhaust Clamp; Band Style;
- Exhaust Clamp
-
Features:
- Exhaust Clamp
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler Pacifica | Muffler To Tail Pipe |
- Exhaust Manifold Hardware Kit
- ( 12 Bolt(s) ) 8 x 1.25 (mm) x 30 (mm) Set Services Two Exhaust Manifolds Replacement recommended
- FEL-PRO ES 75120 Exhaust Manifold Hardware Kit for Chevrolet Silverado 1500
- Product Attributes:
- : (12 Bolts) M8 X 1.25 X 30mm
- Grade Type: Premium
-
Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
03413
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Chrysler Town & Country | V | 3778 | 6 Cyl 3.8L | 231 |
- Exhaust Manifold Kit - Includes Required Gaskets And Hardware
- Product Attributes:
- Heat Shield Included:
- Oui
- Sí
- Yes
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Gris Metálico
- Metallic Gray
- Port Shape: Ovalado
- Contenidos del paquete: Múltiple De Escape, 1 Junta De Múltiple, 1 Junta De Brida, 4 Pernos, 4 Tuercas, 4 Arandelas
- Material:
- Cast Iron
- Hierro Fundido
- Heat Shield Included:
-
Features:
- Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair - includes all necessary gaskets and downpipe hardware
- Trustworthy design - built by industry leader in aftermarket manifolds
- This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
This Part Fits the Following OEM/Substitute Numbers:
101546, 4693321AD, 663480, 88368975737842008
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Chrysler Cirrus | L | 2360 | 4 Cyl 2.4L | 144 |
- Exhaust Manifold Hardware Kit
- Packaging Type: Box
- Product Attributes:
- Washer Included:
- No
- Non
- Stud Included:
- Oui
- Sí
- Yes
- Nut Color:
- Clear Zinc
- Transparente De Cinc
- Nut Material:
- Acero
- Steel
- Stud Material:
- Acero
- Steel
- Bolt Included:
- Oui
- Sí
- Yes
- Stud End 2 Thread Length: 19
- Stud End 2 Thread Type:
- Fine
- Fino
- Stud End 1 Thread Length: 22.75
- Stud End 1 Thread Type:
- Fine
- Fino
- Bolt Grade:
- 10.9
- 9.8
- Nut Included:
- Oui
- Sí
- Yes
- Stud Color:
- Clear Zinc
- Transparente De Cinc
- Tamaño de la rosca n.º 2: M10x1.25
- Tamaño de la rosca n.º 1: M10x1.25
- Thread Size #2: M10x1.25
- Thread Size #1: M10x1.25
- Contenidos del paquete:
- 2 Espárragos
- 2 Tuercas
- 6 Tornillos
- Spring Included:
- No
- Non
- Stud Grade: 10.9
- Washer Included:
-
Features:
- Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
1022510003, 6508185AA, 6509036AA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Chrysler Sebring | L | 2360 | 4 Cyl 2.4L | 144 |
- Exhaust Manifold Kit - Includes Required Gaskets And Hardware
- wo/Partial Zero Emission Vehicle (PZEV)
- Product Attributes:
- Heat Shield Included:
- Oui
- Sí
- Yes
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Gris Metálico
- Metallic Gray
- Port Shape: Ovalado
- Contenidos del paquete: Múltiple De Escape, 1 Junta De Múltiple, 1 Junta De Brida, 4 Pernos, 4 Tuercas, 4 Arandelas
- Material:
- Cast Iron
- Hierro Fundido
- Heat Shield Included:
-
Features:
- Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair - includes all necessary gaskets and downpipe hardware
- Trustworthy design - built by industry leader in aftermarket manifolds
- This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Chrysler Sebring | L | 2360 | 4 Cyl 2.4L | 144 |
- Exhaust Manifold Kit - Includes Required Gaskets And Hardware
- Product Attributes:
- Heat Shield Included:
- Oui
- Sí
- Yes
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Gris Metálico
- Metallic Gray
- Port Shape:
- Cuadrado
- Square
- Contenidos del paquete: Múltiple De Escape, 1 Junta De Múltiple, 2 Pernos, 2 Tuercas, 2 Arandelas
- Material:
- Cast Iron
- Hierro Fundido
- Heat Shield Included:
-
Features:
- Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair - includes all necessary gaskets and downpipe hardware
- Trustworthy design - built by industry leader in aftermarket manifolds
- This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
This Part Fits the Following OEM/Substitute Numbers:
101489, 53032198AE, 53032198AZ, 663400
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2008 - Chrysler Aspen | V | - | Right | 8 Cyl 5.7L | 345 |
Showing 1 - 10 of 166 products
Loading...