Shop By Product Matching "FAE"
Choose a Model for your 2008 Dodge
Image
Product
Price
- Full-Size 6-6.5ft Truck Air Mattress with Built in Pump and Rechargeable Battery
- Fits Full Size Trucks With Approximately 6 ft to 6.5 ft Beds. Does NOT fit Stepside Beds.
- AirBedz by Pittman Outdoors - PPI 102 Full Size 6.0'-6.5' Standard Bed with Built-in Rechargeable Battery Air Pump - The Original Truck Bed Air Mattress
- AirBedz by Pittman Outdoors - PPI 102 Full Size 6.0'-6.5' Short Bed with Built-in Rechargeable Battery Air Pump - The Original Truck Bed Air Mattress
-
Features:
- Built in Rechargeable Detachable NiMH Battery Air Pump for Inflation/Deflation
- Heavy Duty Fabric Construction
- Comfort Coil System evenly distributes weight
- Convenient carrying/storage bag with shoulder strap included
- Air coils over wheel wells. Creating a sleep area that utilizes the entire bed of truck
- Patch Kit Included
- Product Dimensions: 76" x 63.5" x 12" Inflated
- Weight capacity up to 1200 pounds
- Fits: Chevy C/K 6.6’, Chevy Silverado 6.6’, Dodge Ram 6.3’-6.5’, Ford F150/F250/350 6.5’-6.7’, GMC C/K 6.6’, GMC Sierra6.6’, Nissan Titan 6.5’and Toyota Tundra 6.5’.
- Optional inflatable Wheel Well Inserts (PPI-AC5) transform your Airbedz into a standard air mattress (sold separately)
- Airbedz by Pittman Outdoors Original Truck Bed Air Mattresses are available in multiple sizes and colors to fit mid and full-size trucks in long and short bed layouts. Cutouts on each side allow the mattress to fit around and over the wheel wells, creating a sleeping area that utilizes the entire truck bed, providing more room and comfort for outdoor enthusiasts. A built-in rechargeable pump inflates and deflates the mattress with the flip of a switch. An integrated air coil system evenly distributes weight over a 12-inch-thick mattress. Heavy-duty cloth construction ensures a more puncture resistant mattress that meets the needs of extreme outdoor enthusiasts. Where playing hard and sleeping well are all that matter. Optional inflatable Wheel Well Inserts transform AirBedz into a standard air mattress suitable for home and tent use (Sold Separately). Compatible with: Chevy C/K 6.6’, Chevy Silverado 6.6’, Dodge Ram 6.3’-6.5’, Ford F150/F250/350 6.5’-6.7’, GMC C/K 6.6’, GMC Sierra6.6’, Nissan Titan 6.5’and Toyota Tundra 6.5’.
Additional Fitment Information:
| Vehicle | Bed Length |
|---|---|
| 2008 - Dodge Ram 1500 | 76.3 |
- H11/H8/H9/H16JP;Fix Canbus and PWM Error
- All in one harness to fix CANBus and PWM errors for any LED headlight and fog light conversion
- Product Attributes:
- IP Rating: Ip67
- Prop 65 Warning Label:
- Warning - Both Cancer And Reproduction.jpg
- Warning - Both Cancer And Reproduction.tif
- Power: 6.5w
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
- Current: 0.5a At 13v
-
Features:
- Error cancelling wiring harness for vehicles equipped with CANBus and PWM system.
- Eliminates flickering, on and off flash, and dashboard warning lights and other vehicle electrical system complications.
- For use with LED headlight bulbs. Developed for upgrading LED headlight bulbs into the headlight and fog light of vehicles that operate with CANBUS / PWM technology. Simply plug and play installation to prevent bulb out warnings or flickering.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Dodge Sprinter 3500 | Front |
- 2.9 ft.; Depth 13 in.; Height 60 in.; Width 2 in.; White; Steel; Powder Coat Finish For Models w/144 in. WB and High Roof~For Models w/144 in WB and Standard Roof~For Models w/170EX WB and High Roof~For Models w/170EX WB and Standard Roof~For Models w/170 in. WB and High Roof~For Models w/170 in. WB and Standard Roof
- Tapered End Panel Set; 2.9 ft.; Depth 13 in.; Height 60 in.; Width 2 in.; White; Steel; Powder Coat Finish;
- Tapered End Panel Set
-
Features:
- Includes Two Square Back End Panels And Mounting Hardware
- Manufactured Of Heavy Gauge Steel
- Brite White Powder Coat Finish
- Combine end panel sets with individual accessory shelves to create a complete van shelf unit. Use these end panels to create or service shelf units 60 in. high and 13 in. deep. Includes two tapered end panels that measure 60 in. high, 13 in. wide and 1.5 in. deep. Manufactured of heavy gauge steel and finished with Brite White Powder Coat for a long lasting professional appearance. Includes mounting and installation hardware. Combine End Panel Sets With Individual Accessory Shelves To Create A Complete Van Shelf Unit 60 in. High And 13 in. Deep
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Sprinter 3500 |
- 2.9 ft.; Depth 13 in.; Height 60 in.; Width 2 in.; White; Steel; Powder Coat Finish For Models w/144 in WB and Standard Roof~For Models w/144 in. WB and High Roof~For Models w/170 in. WB and High Roof~For Models w/170 in. WB and Standard Roof~For Models w/170EX WB and High Roof~For Models w/170EX WB and Standard Roof
- Tapered End Panel Set; 2.9 ft.; Depth 13 in.; Height 60 in.; Width 2 in.; White; Steel; Powder Coat Finish;
- Tapered End Panel Set
-
Features:
- Includes Two Square Back End Panels And Mounting Hardware
- Manufactured Of Heavy Gauge Steel
- Brite White Powder Coat Finish
- Combine end panel sets with individual accessory shelves to create a complete van shelf unit. Use these end panels to create or service shelf units 60 in. high and 13 in. deep. Includes two tapered end panels that measure 60 in. high, 13 in. wide and 1.5 in. deep. Manufactured of heavy gauge steel and finished with Brite White Powder Coat for a long lasting professional appearance. Includes mounting and installation hardware. Combine End Panel Sets With Individual Accessory Shelves To Create A Complete Van Shelf Unit 60 in. High And 13 in. Deep
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Sprinter 3500 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Includes the Actuator Flow Control Valve or also known as Short Runner Valve, the MAP Sensor and Gaskets and Hardware.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Caliber |
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Viper |
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Dodge Challenger |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Sprinter 3500 | V | 2987 | 6 Cyl 3.0L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Sprinter 3500 | V | 2987 | 6 Cyl 3.0L | - |
- Front Suspension Link Pair For Dakota Dodge Ram Mitsubishi Raider K72-100215
- Front Suspension Link Pair For Dakota Dodge Ram Mitsubishi Raider - Left Right Side (Driver Passenger) K72-100215
- Top Quality
- Product Attributes:
- WebNameEbay4: For Dakota Dodge Ram Mitsubishi Raider Front Suspension Link Pair
- ComponentsSummaryRegularWithBrands: 2x Top Quality Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: 2x Link Kit
- ComponentsSummaryLongWithBrands: 2x Front Top Quality Suspension Stabilizer Bar Link Kit (both Side)
- WebNamePlain: Front Suspension Link Pair K72-100215
- ComponentsSummaryShortWithBrands: 2x Tq Link Kit
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Front Suspension Stabilizer Bar Link Kit (both Side)
- WebNameLong: Front Suspension Link Pair For Dakota Dodge Ram Mitsubishi Raider - Left Right Side (driver Passenger) K72-100215
- WebNameShort: Front Suspension Link Pair For Dakota Dodge Ram Mitsubishi Raider K72-100215
- ComponentsSummaryRegular: 2x Suspension Stabilizer Bar Link Kit
- WebNameRegular: Front Suspension Link Pair For Dakota Dodge Ram Mitsubishi Raider - Left Right Side (driver Passenger) K72-100215
- WebNameEbay2: [front] Suspension Link Pair For Dakota Dodge Ram Mitsubishi Raider
- WebNameEbay3: Suspension Link Front Pair For Dakota Dodge Ram Mitsubishi Raider
- WebNameEbay: Front Suspension Link Pair For Dakota Dodge Ram Mitsubishi Raider K72-100215
-
Features:
- TQ USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- TQ steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : SL81195PR SL81195XL SL81195 GS25806 MS25806 K750263 18750263 2651903 TK750263
- Kit Includes: 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
- Part Reference Numbers : SL81195PR SL81195XL SL81195 GS25806 MS25806 K750263 18750263 2651903 TK750263
- TQ offers premium suspension kits at reasonable pricing and have been the reference accross North America for over 40 years.
This Part Fits the Following OEM/Substitute Numbers:
18750263, 2651903, 536-145, 545-1695, 58180032, GS25806, JTS859, K750263, MS25806, SL81195, TK750263, TQC-K750263
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Dodge Dakota | Front |
Showing 1 - 10 of 14 products
Loading...