Shop By Product Matching "Fit"
Choose a Make for your 1965 vehicle
Image
Product
Price
- Brake Tee;
- Brake Tee
-
Features:
- Brake Tee
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1965 - Jeep J-3500 |
- w/9 in. Brakes
- Brake Tee;
- Brake Tee
-
Features:
- Brake Tee
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1965 - Jeep CJ6 |
- Black; 8mm; Graphite Core; 90 Deg. Boots
- Universal Fit Spark Plug Wire Set; Black; 8mm; Graphite Core; 90 Deg. Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: 90 Degree
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: 90 Degree
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle |
|---|
| 1965 - Dodge Monaco |
- Blue; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Blue; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: Straight
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- Silicone Spark Plug Boots
- 90 Degree Spark Plug Boot Angle
- 450 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Meets or Exceeds OE Resistance
- Cooper Core
- Limited 90 Day Warranty
- ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle |
|---|
| 1965 - Mercury Monterey |
- Red; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Red; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: Straight
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle |
|---|
| 1965 - Pontiac GTO |
- Fits Ford 289-302 Engine
- HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Blue
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Distributors
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a blue cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Mercury Caliente | V | 4727 | 8 Cyl 4.7L | 289 |
- Fits Ford 289-302 Engine
- HEI Distributor Street/Strip Built-In Coil Housing Finish: Natural Cap Color: Blue
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Distributors
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a blue cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Ford Fairlane | V | 4727 | 8 Cyl 4.7L | 289 |
- Blue; 8mm; Copper Core; 90 Deg. Orange Boots
- Universal Fit Spark Plug Wire Set; Blue; 8mm; Copper Core; 90 Deg. Orange Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Copper
- Boot Type: 90 Degree
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: 90 Degree
-
Features:
- Silicone Spark Plug Boots
- 90 Degree Spark Plug Boot Angle
- 450 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Meets or Exceeds OE Resistance
- Cooper Core
- Limited 90 Day Warranty
- These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.
Additional Fitment Information:
| Vehicle |
|---|
| 1965 - Dodge 880 |
- Fits SB Chevy
- Short; Fits SB Chevy; Mounting Bolt(s) Included:No; Emblem:CHEVROLET and Bowtie Emblem; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Stock; Finish:Chrome; Material:Stamped Steel
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1958 To 1986
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: Engine Valve Covers Feature The Inchchevrolet Inch And Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Embossed Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.375
- 61
- Sheen Level: High Gloss
- Valve Cover Type: Short
- These engine valve covers are manufactured from high quality stamped steel material. They are a short style valve cover and feature oil breather baffles. The valve covers have a great looking and long lasting chrome plated finish that also includes the "Chevrolet" and "Bowtie" logos. Designed to fit 1955 to 1986 262-400 Small Block Chevy engines. This an officially licensed GM Performance Parts product. Sold as one pair. Backed by a limited 30 day factory warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Studebaker Cruiser | V | 4638 | 8 Cyl 4.6L | 283 |
- Fits SB Chevy
- Short Fits SB Chevy Mounting Bolt(s) Included: No Emblem: CHEVROLET and Bowtie Emblem Valve Cover Bolt Pattern: Perimeter Bolt Valve Cover Height: Stock Finish: Chrome Material: Stamped Steel
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1958 To 1986
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: Engine Valve Covers Feature The Inchchevrolet Inch And Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Embossed Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.375
- 61
- Sheen Level: High Gloss
- Valve Cover Type: Short
- These engine valve covers are manufactured from high quality stamped steel material. They are a short style valve cover and feature oil breather baffles. The valve covers have a great looking and long lasting chrome plated finish that also includes the "Chevrolet" and "Bowtie" logos. Designed to fit 1955 to 1986 262-400 Small Block Chevy engines. This an officially licensed GM Performance Parts product. Sold as one pair. Backed by a limited 30 day factory warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Studebaker Cruiser | V | 4638 | 8 Cyl 4.6L | 283 |
Showing 1 - 10 of 76 products
Loading...