Image
Product
Price
- Fits Ford 289-302 Engine
- HEI Distributor Street/Strip Built-In Coil Housing Finish: Natural Cap Color: Blue
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Distributors
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a blue cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Mercury Montego | V | - | 8 Cyl 5.0L | 302 |
- Fits Ford 289-302 Engine
- HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Blue
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Distributors
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a blue cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Mercury Cyclone | V | - | 8 Cyl 5.0L | 302 |
- Custom Form-Fit Car Cover-Black
- Form-Fit(TM) Indoor Custom Black; No Mirror Pockets; Size G4
- Covercraft Custom Fit Car Covers Form-Fit Black
- Form-Fit(TM) Indoor Custom Car Cover
- Product Attributes:
- Fit: Custom
- Attachment Method: Full Elastic Hem
-
Features:
- Covercraft Exclusive Thats The Most Luxurious Indoor Cover Avail
- Polyester Knit With Spandex Added To The Yarns
- Special Stretch Fabric Follows Vehicle Contours
- Inside Is 100% Cotton Sheared To A Fleece Finish
- 4-year Warranty
- Form-Fit(TM) Indoor Covers have body hugging polyester knit with Spandex (to provide stretch and recovery), finished on the inside with 100 percent cotton terry loop that's been sheared to a luxurious soft fleece lining. Form-Fit covers will pamper the finish, while following every curve of the body, for a truly custom fit.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | Body | CID |
|---|---|---|---|---|---|---|
| 1970 - Mercury Montego | V | - | 4 | 8 Cyl 7.0L | Sedan | 429 |
- Blue; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Blue; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: Straight
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- Silicone Spark Plug Boots
- 90 Degree Spark Plug Boot Angle
- 450 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Meets or Exceeds OE Resistance
- Cooper Core
- Limited 90 Day Warranty
- ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Mercury Marquis | V | - | 8 Cyl 7.0L | 429 |
- Red; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Red; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: Straight
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Mercury Marquis | V | 6391 | 8 Cyl 6.4L | 390 |
- Black; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Black; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: Straight
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1970 - Mercury Marauder | V | 6391 | 8 Cyl 6.4L | Y | 390 |
- Yellow Wire; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Yellow Wire; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: Straight
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Engine: Universal 8 Cylinder
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Mercury Monterey | V | - | 8 Cyl 7.0L | 428 |
- Fits Ford 260-289-302-351W
- Tube Kit;Finish:Chrome; Material:Steel; Style:Non-Locking
- Sold as One Complete Kit
- Product Attributes:
- Category: Oil
- Feature/Benefit: Chrome, Steel.
- Applications: Ford Small To Block 260 To 289 To 302 To 351w Engines 1962 To 1978
- Make: Ford
- Material: Steel
- Finish: Chrome
- Chrome, steel.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Mercury Cyclone | V | - | 8 Cyl 5.0L | 302 |
- Fits Ford 260-289-302-351W
- Tube Kit Finish: Chrome Material: Steel Style: Non-Locking
- Sold as One Complete Kit
- Product Attributes:
- Category: Oil
- Feature/Benefit: Chrome, Steel.
- Applications: Ford Small To Block 260 To 289 To 302 To 351w Engines 1962 To 1978
- Make: Ford
- Material: Steel
- Finish: Chrome
- Chrome, steel.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Mercury Cyclone | V | 5753 | 8 Cyl 5.8L | 351 |
- Yellow Wire; 8mm; Copper Core; Straight Orange Boots
- Universal Fit Spark Plug Wire Set; Yellow Wire; 8mm; Copper Core; Straight Orange Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Copper
- Boot Type: Straight
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Engine: Universal 8 Cylinder
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Mercury Marquis | V | - | 8 Cyl 6.4L | 390 |
Showing 1 - 10 of 11 products
Loading...