Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 08/01/1983-
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1984 - Toyota Corolla | Fr:08-01-83 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 05/01/1984-
Additional Fitment Information:
| Vehicle | Sub Model | Prod. Date Range |
|---|---|---|
| 1984 - Toyota Camry | LE | Fr:05-01-84 |
- Sold In Pairs
- Pro Fit Splashguards; Sold In Pairs;
- Pro Fit Splashguards
-
Features:
- Factory Fit Appearance
- Contoured For Enhanced Styling And Full Protection
- Guaranteed To Be Unbreakable Down To -40F
- Complete With Corrosion-Resistant Mounting Hardware
- Seven Models Fit Virtually All Of The Popular Vehicles
- Incredibly Good Fit And Original Equipment Appearance
- Sold In Pairs
- RoadSport(TM) Pro Fit(TM) Splashguards are engineered to fit all cars, trucks, vans, SUVs and Crossover vehicles with a factory fit appearance. Seven different models work with virtually all the most popular makes and model vehicles on the road today. Simply select the model number from the application guide and cross it to an ordering number if ordering on-line. Pro Fit(TM) provides full protection and enhanced styling. Seven basic profiles work with virtually all makes and models of contemporary vehicles. Factory-fit appearance. Contoured for enhanced styling and full protection. Guaranteed to be unbreakable down to negative 40 degrees Fahrenheit. Complete with corrosion-resistant mounting hardware. Seven models fit virtually all of the popular vehicles on the road today with an incredibly good fit and original equipment appearance. Sold in pairs.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1984 - Toyota Land Cruiser | Rear | Base |
- Sold In Pairs
- Pro Fit Splashguards; Sold In Pairs;
- Pro Fit Splashguards
-
Features:
- Factory Fit Appearance
- Contoured For Enhanced Styling And Full Protection
- Guaranteed To Be Unbreakable Down To -40F
- Complete With Corrosion-Resistant Mounting Hardware
- Seven Models Fit Virtually All Of The Popular Vehicles
- Incredibly Good Fit And Original Equipment Appearance
- Sold In Pairs
- RoadSport(TM) Pro Fit(TM) Splashguards are engineered to fit all cars, trucks, vans, SUVs and Crossover vehicles with a factory fit appearance. Seven different models work with virtually all the most popular makes and model vehicles on the road today. Simply select the model number from the application guide and cross it to an ordering number if ordering on-line. Pro Fit(TM) provides full protection and enhanced styling. Seven basic profiles work with virtually all makes and models of contemporary vehicles. Factory-fit appearance. Contoured for enhanced styling and full protection. Guaranteed to be unbreakable down to negative 40 degrees Fahrenheit. Complete with corrosion-resistant mounting hardware. Seven models fit virtually all of the popular vehicles on the road today with an incredibly good fit and original equipment appearance. Sold in pairs.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1984 - Toyota Land Cruiser | Front | Base |
- HM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Hm Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Hm Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23886
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23886. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1984-1995 Toyota Pickup, 1984-1997 Toyota Corolla, and more, this direct-fit catalytic converter also interchanges with OE parts 17410-11690 and 17410-11700, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
17410-02090, 17410-02110, 17410-11690, 17410-11700, 17410-16880, 17410-1A010, 1741002110, 1741011690, 1741011700, 1741016880, 174101A010, 18450-01060, 18450-01070, 18450-01080, 18450-01090, 18450-01100, 18450-01110, 18450-02060...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Toyota Van | L | 1998 | 4 Cyl 2.0L | 122 |
- GS900 Series - Custom Fit Grille Bug Screen
- GS900 Series - Custom Fit Grille Bug Screen, with heavy duty tear resistant mesh screen, no drill installation with stick a stud system
- Fia GS900 Series - Custom Fit Bug Grille Screen is made from heavy duty tear resistant mesh. In the spring, summer and fall it protects the grill and radiator from stone chips, bugs, and debris. Quick and easy installation with Fia's patented Stick-A-Stud no drill installation system. Using a 3M adhesive backed stud fastener, just peel and stick to surface and snap on either the bug screen. No tools are required for installation.
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Toyota Pickup |
- WF920 Series - Custom Fit Combination Winter Front/Bug Screen
- WF920 Series - Custom Fit Combination Winter Front/Bug Screen, includes winter front and bug screen, with stick a stud no drill installation system.
- WF920 Series custom fit winter fronts and bug screens are designed to provide benefits in both winter and summer. Made from all weather heavy duty quilted vinyl, the winter front promotes better fuel economy. It aids in providing faster engine warm up and interior heat. It keeps diesel engines at optimal operating temperatures with adjustable air flow doors. In the spring and summer, the bug screen, made from heavy duty tear resistent mesh, protects the rad and grille from bugs, stones and debris. The winter front and bug screen are interchangeable using Fia's patented Stick A Stud no drill installation system. Using a 3M adhesive backed stud fastener, just peel and stick to surface and snap on either the winter front or bug screen. No tools are required for installation. Optional screw on hardware kit included.
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Toyota Pickup |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 22761
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22761. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1975-1978 Nissan B210, 1983-1984 Toyota Cressida, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 1984 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | Wagon | - |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22761. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1975-1978 Nissan B210, 1983-1984 Toyota Cressida, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 1984 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | Wagon | - |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 1
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: Yes
- Title: Magnaflow 1979-1987 Toyota Land Cruiser Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23894 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1979-1987 Toyota Land Cruiser and interchanges with OE parts 17400-61021 and 17400-61020. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
This Part Fits the Following OEM/Substitute Numbers:
17400-61020, 17400-61021, 1740061020, 1740061021
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1984 - Toyota Land Cruiser | L | 4227 | GAS | 6 Cyl 4.2L | - |
Showing 1 - 10 of 22 products
Loading...