Shop By Product Matching "Fit"
Choose a Model for your 1985 Audi
Image
Product
Price
- Easy fit Car Cover, 4 Layer; 14' 1" to 15' Vehicle Lgth; Includes Lock, Cable, Bag
- Universal Easy fit Car Cover 4 Layer; Includes Lock, Cable, and Storage Bag; 14' 1" to 15' Vehicle Length
- Product Attributes:
- Size: 14 Ft. 1 Inch To 15 Ft. Long
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Soft And Durable Diamond Bond Pattern
- Unique 4-Layer Breathable Material
- Ultraviolet Protection Against Sun And Heat
- Polypropylene Layers Repel Water
- Side Grommets For Tie Downs
- Includes Free Locking Cable And Storage Bag
- Indoor And Outdoor Usage
- Unique Easy fit Car Cover has a 4-layer non-woven polypropylene construction that blocks harmful paint contaminants. With a rugged Spun Bond outer layer attached to two melt blown middle layers of added protection and joined with a softer inner layer to produce a water resistant fabric that protects vehicle finish from the elements while maintaining breath-ability to avoid temperature and moisture build-up under the cover.
Additional Fitment Information:
| Vehicle | Doors |
|---|---|
| 1985 - Audi 4000 | 4 |
- Standard Grade Direct-Fit Catalytic Converter
- To VIN # F_081485 Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 22927
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22927. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1980-1988 Audi 5000, 1990-1991 Audi 100, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Audi 5000 | L | 2226 | Automatic | United States | 5 Cyl 2.2L | - |
- Standard Grade Direct-Fit Catalytic Converter
- To VIN # F_081485
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22927. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1980-1988 Audi 5000, 1990-1991 Audi 100, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Audi 5000 | L | 2226 | Automatic | United States | 5 Cyl 2.2L | - |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22918. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1983-1991 Volkswagen Vanagon, 1975-1979 Volkswagen Beetle, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Audi 4000 | L | 1781 | 4 Cyl 1.8L | - |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre Converter
- Outlet Gasket Included: No
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 22918
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22918. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1983-1991 Volkswagen Vanagon, 1975-1979 Volkswagen Beetle, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Audi Coupe | L | 2226 | 5 Cyl 2.2L | - |
- Easy fit Car Cover, 4 Layer; 15' 1" to 16' Vehicle Lgth; Includes Lock, Cable, Bag
- Universal Easy fit Car Cover 4 Layer; Includes Lock, Cable, and Storage Bag; 15' 1" to 16' Vehicle Length
- Product Attributes:
- Size: 15 Ft. 1 Inch To 16 Ft. Long
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Soft And Durable Diamond Bond Pattern
- Unique 4-Layer Breathable Material
- Ultraviolet Protection Against Sun And Heat
- Polypropylene Layers Repel Water
- Side Grommets For Tie Downs
- Includes Free Locking Cable And Storage Bag
- Indoor And Outdoor Usage
- Unique Easy fit Car Cover has a 4-layer non-woven polypropylene construction that blocks harmful paint contaminants. With a rugged Spun Bond outer layer attached to two melt blown middle layers of added protection and joined with a softer inner layer to produce a water resistant fabric that protects vehicle finish from the elements while maintaining breath-ability to avoid temperature and moisture build-up under the cover.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 1985 - Audi 5000 | Sedan |
Showing 1 - 6 of 6 products
Loading...