Image
Product
Price
- Crankcase Tube Vent Fitting;
- Crankcase Tube Vent Fitting
-
Features:
- Crankcase Tube Vent Fitting
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Dodge Dakota |
- WF920 Series - Custom Fit Combination Winter Front/Bug Screen
- WF920 Series - Custom Fit Combination Winter Front/Bug Screen, includes winter front and bug screen, with stick a stud no drill installation system.
- WF920 Series custom fit winter fronts and bug screens are designed to provide benefits in both winter and summer. Made from all weather heavy duty quilted vinyl, the winter front promotes better fuel economy. It aids in providing faster engine warm up and interior heat. It keeps diesel engines at optimal operating temperatures with adjustable air flow doors. In the spring and summer, the bug screen, made from heavy duty tear resistent mesh, protects the rad and grille from bugs, stones and debris. The winter front and bug screen are interchangeable using Fia's patented Stick A Stud no drill installation system. Using a 3M adhesive backed stud fastener, just peel and stick to surface and snap on either the winter front or bug screen. No tools are required for installation. Optional screw on hardware kit included.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Dodge Ram 3500 |
- Pittman Outdoors Inflatable Wheel Well Side Inserts Fits PPI-101 Through PPI-104
- AirBedz by Pittman Outdoors - PPI AC5 Original Inflatable Wheel Well Side Inserts - Fits - PPI 101 and PPI-104
- AirBedz by Pittman Outdoors - PPI AC5 Original Inflatable Wheel Well Side Inserts - Fits - PPI 101 through PPI-104
-
Features:
- Converts AirBedz into a regular air mattress. Great for Camping or Home use
- Velcro attachments
- Inflated Dimensions 33"x6"x10
- AirBedz Inflatable Wheel Well Inserts, One size fits all FITS PPI 101-PPI 104
- Inserts only, does not include mattress
- Patch Kit Included
- Product Dimensions: 33" x 6" x 10" Inflated
- AirBedz Original Inflatable Wheel Well Inserts. These inserts are designed to fit and work with mattresses: PPI 101, PPI 102, PPI 103, PPI 104. (Mattress Sold Seperate) AirBedz Wheel Well Inserts convert your AirBedz mattress into a regular air mattress for use in tents or as a guest bed in the home. Simply inflate and place into the wheel well openings using the attached Velcro tabs.
Additional Fitment Information:
| Vehicle | Bed Length |
|---|---|
| 1996 - Dodge Dakota | 96.0 |
- Custom Towing Mirror Sleeve fitted to your vehicles exact specifications
- Will Not Fit 5x7 in. Sport Mirror; Pair; Will Not Fit 6x9 in. Sport Mirror
- Custom Towing Mirror Durable, aerodynamic, and sleeve fitted to your vehicles exact specifications. No tools are required, and no marks or holes are left behind. Includes 1 mirror PR, 2 knobs, 2 wedges, and instructions.
- Custom Towing Mirror Set
- Product Attributes:
- Category: Finished Good
- Size: 4.5 X 5.125 - Inch
-
Features:
- Slides On Existing Mirror With Wedge Lock Security
- Custom Design Ensures A Perfect Fit
- Easy Installation With No Tools Required
- Does Not Obstruct Existing Mirror
- Sleek Custom Design Compliments Existing Mirror
- Limited 1 Year Warranty
- CIPA's Custom Towing Mirrors were designed to fit over standard factory rearview side mirrors, and are available in over 40 exclusive applications to fit a variety of popular truck and SUV models. The CIPA Custom Towing Mirror is durable, aerodynamic, and sleeve fitted to your vehicles specifications. These mirrors will slide snugly over your vehicles existing rearview side mirror, and features an additional adjustable mirror on the outboard end that extends your towing vision, without obstructing your existing vehicle mirror. No tools are required, and no marks or holes are left on your vehicle. The CIPA Towing Mirrors and installation knobs are made with durable ABS plastic known for its strength, rigidity, and unbreakable security. The mirror face is made with scratch-resistant glass for years of unobstructed towing use. The installation wedges are formed from a polypropylene plastic that has excellent long-term shape conformity, and provides years of installation reliability. CIPA Custom Towing Mirrors can withstand the elements to provide increased all-weather Towing Vision capability. This kit includes 1 driver side mirror, 1 passenger side mirror, 2 installation knobs, 1 left hand installation wedge, 1 right hand installation wedge, and illustrated installation instructions. Note: These mirrors will NOT fit over 5"x7" sport-style mirrors. Expand your Horizons
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Dodge Ram 2500 |
- Dodge 5.9L Cummins Factory-Fit Boot Kit
- Factory-Fit Boot Kit, fits Dodge 5.9L Cummins 1994-2002
- Product Attributes:
- SellingPoint04: Includes High-quality Constant-tension T-bolt Clamps
- SellingPoint05: Mishimoto Lifetime Warranty
- SellingPoint06: N/a
- SellingPoint07: N/a
- SellingPoint01: Direct Fit For The 1994-2002 Dodge Ram 5.9l Cummins
- TechSpec Maximum Temperature Rating: 428
- SellingPoint02: Five Layers Of Heat Resistant Fibers For Maximum Durability And Blowout Prevention
- SellingPoint03: Duracore Technology Provides Superior Resistance To Heat, Pressure, Fuel, And Oil
- TechSpec Length (Inches): N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outer Diameter (in): N/a
- SellingPoint10: N/a
- TechSpec Note: N/a
- SellingPoint15: N/a
- TechSpec Inner Diameter (in): N/a
- Install Difficulty: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Purchase Includes: (4) Silicone Boots With Duracore Technology--(8) Constant Tension T-bolt Clamps--mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Material: Silicone With Duracore
- TechSpec Applications: N/a
- TechSpec Coupler Style: N/a
- TechSpec Interior Material: Duracore
-
Features:
- Direct fit for the 1994-2002 Dodge Ram 5.9L Cummins
- Five layers of heat resistant fiber for maximum durability and blowout prevention
- DuraCore™ technology provides superior resistance to heat, pressure, fuel, and oil
- Includes high-quality constant-tension T-bolt clamps
- Mishimoto Lifetime Warranty
- The Mishimoto factory-fit boot kit with DuraCore technology is the perfect upgrade in performance and reliability for your 5.9L Cummins.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power.As with all Mishimoto products, this boot kit is protected by our signature lifetime warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1996 - Dodge Ram 2500 | Limited |
- Dodge 5.9L Cummins Factory-Fit Boot Kit
- Factory-Fit Boot Kit, fits Dodge 5.9L Cummins 1994-2002
- Product Attributes:
- SellingPoint04: Includes High-quality Constant-tension T-bolt Clamps
- SellingPoint05: Mishimoto Lifetime Warranty
- SellingPoint06: N/a
- SellingPoint07: N/a
- SellingPoint01: Direct Fit For The 1994-2002 Dodge Ram 5.9l Cummins
- TechSpec Maximum Temperature Rating: 428
- SellingPoint02: Five Layers Of Heat Resistant Fibers For Maximum Durability And Blowout Prevention
- SellingPoint03: Duracore Technology Provides Superior Resistance To Heat, Pressure, Fuel, And Oil
- TechSpec Length (Inches): N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outer Diameter (in): N/a
- SellingPoint10: N/a
- TechSpec Note: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- TechSpec Inner Diameter (in): N/a
- Install Difficulty: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Purchase Includes: (4) Silicone Boots With Duracore Technology--(8) Constant Tension T-bolt Clamps--mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Material: Silicone With Duracore
- TechSpec Applications: N/a
- TechSpec Coupler Style: N/a
- TechSpec Interior Material: Duracore
-
Features:
- Direct fit for the 1994-2002 Dodge Ram 5.9L Cummins
- Five layers of heat resistant fiber for maximum durability and blowout prevention
- DuraCore™ technology provides superior resistance to heat, pressure, fuel, and oil
- Includes high-quality constant-tension T-bolt clamps
- Mishimoto Lifetime Warranty
- The Mishimoto factory-fit boot kit with DuraCore technology is the perfect upgrade in performance and reliability for your 5.9L Cummins.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power.As with all Mishimoto products, this boot kit is protected by our signature lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | L | - | DIESEL | 6 Cyl 5.9L | 359 |
- HM Grade Direct-Fit Catalytic Converter
- Except Heavy Duty Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Hm Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 3
- Air Tube Adaptable: No
- Title: Magnaflow Hm Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23285
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23285 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1994-2001 Dodge Ram 1500, 1994-2002 Dodge Ram 2500, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Dodge Ram 2500 | V | - | GAS | 8 Cyl 5.9L | 360 |
- HM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Hm Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 3
- Air Tube Adaptable: No
- Title: Magnaflow Hm Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23285
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23285 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1994-2001 Dodge Ram 1500, 1994-2002 Dodge Ram 2500, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
5011 795AB, 5011795AB, 5018 794AB, 5018 795AB, 5018 796AB, 5018794AB, 5018795AB, 5018796AB, 5201 9292, 5201 9293, 5201 9294, 5201 9295, 5201 9519, 52019292, 52019293, 52019294, 52019295, 52019519...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 1500 | V | 3906 | 6 Cyl 3.9L | 239 |
- OE30 Series - Oe Tweed Custom Fit Front Seat Cover- Charcoal
- Front bench seat, built in headrests.
- OE30 Series - Oe Tweed Custom Fit Front Seat Cover- Charcoal, with Super Grip fastening system for easy installation and wear resistant tweed fabric.
-
Features:
- State-of-the-Art Custom Interior
- Advanced Design
- Super-Grip Technology
- Quick and Easy Installation
- Wear Resistant Fabrics
- Allowances for Side Airbags
- OE30 Series custom fit seat covers are engineered to meet or exceed vehicle manufacturer standards. An advanced design creates a dynamic state-of-the-art custom interior. On vehicle testing of all Fia custom fit seat covers ensures an exact fit each time. Super- Grip is the slip resistent fastening system that incorporates quick release belt and buckle fasteners, zippers and velcro, making installation quick and easy. Additional foam padding in the cushion and back rest, provide added comfort. The form fit wrap around design that is accomplished through multi-directional stretch trim material molds the cover to the contours of your seat. The original equipment tweed material is hand washable as well as lightfast and colorfast. Custom formed seat belt and head rest openings, along with center console covers add to the OE custom look. Head rest covers included. Available in Charcoal, Gray and Taupe.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Dodge Ram 3500 | Front |
- TR40 Series - Wrangler Saddleblanket Custom Fit Front Seat Cover - Gray
- Front split seat 40/20/40, built in headrests, center armrest, upper storage only (armrest)
- TR40 Series - Wrangler Saddleblanket Custom Fit Front Seat Cover - Gray, with Super Grip fastening system for easy installation and wear resistant saddleblanket material.
-
Features:
- State-of-the-Art Custom Interior
- Advanced Design
- Super-Grip Technology
- Quick and Easy Installation
- Wear Resistant Fabrics
- Allowances for Side Airbags
- TR40 Series Wrangler custom fit seat covers are engineered with authentic woven saddle blanket material. An advanced design creates a dynamic state-of-the-art custom interior. On vehicle testing of all Fia custom fit seat covers ensures an exact fit each time. Super- Grip is the slip resistent fastening system that incorporates quick release belt and buckle fasteners, zippers and velcro, making installation quick and easy. The form fit wrap around design that is accomplished through multi-directional stretch trim material molds the cover to the contours of your seat. The material is hand washable as well as lightfast and colorfast. Custom formed seat belt and head rest openings, along with center console covers add to the original equipment custom look. Head rest covers included. Available in Black, Brown, Gray, Navy and Wine.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Dodge Ram 2500 | Front |
Showing 1 - 10 of 170 products
Loading...