Image
Product
Price
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - Toyota Supra |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Toyota Corolla | Rear To Frame |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 1993 - Toyota Pickup | L | 2366 | Front To Frame | 4 Cyl 2.4L | DLX | RWD | - |
- 3/36 Warranty
- with 15mm Sway Bar Diameter
with 16mm Sway Bar Diameter - Set of 2 Bushings
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Toyota Camry | Rear To Frame |
- FRAM, HP1, Oil Filter
- High Performance Spin-on Oil Filter
- FRAM HIGH PERFORMANCE
- Product Attributes:
- Gasket Inside Diameter: 2.460
- Non Slip Grip: No
- Gasket Thickness: 0.0354
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 500.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Grade: Advanced
- Gasket Outside Diameter: 2.814
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Low-restriction synthetic blend racing media designed for high oil flow. The media features 94% efficiency @20 microns for excellent engine protection**
- Silicone anti-drain back valve.
- Recommended maximum oil flow: 10-18gpm, depending on model***
- Maximum burst pressure: 350-500psi, depending on model***
- Maximum operating pressure: 200psi on all models***
- Compatible with all oil types, this filter is optimized for racing and high-performance street cars
- FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
This Part Fits the Following OEM/Substitute Numbers:
041-8144, 105000603000, 15590, 185515, 3120MP, 33120, 3609251, 3690251, 85622, 86120MP, 92622, B2-HPG, B252, B253, BF7613, BF992, BT8328, BT8434...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Toyota Land Cruiser | L | 4477 | 6 Cyl 4.5L | - |
- FRAM, PH4967, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.188
- Non Slip Grip: Yes
- Gasket Thickness: 0.188
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 350.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Grade: Advanced
- Gasket Outside Diameter: 2.438
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Silicone anti-drain back valve helps ensure safe engine start up
- Proven protection for up to 10,000 miles (16,000 kilometers)
- SureGrip® technology for easy install and removal
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-0750, 041-8066, 054-067, 063-2090, 063-8017-00, 070185, 070185B, 070185BS, 070185D, 08922-02002, 08922-02005, 10-01618, 100806, 10131, 1016467, 1065, 108-3842, 11-11514...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | - |
- FRAM, PH4967, Oil Filter
- Supersedes PH4386 (Consolidation) Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.188
- Non Slip Grip: Yes
- Gasket Thickness: 0.188
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 350.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Grade: Advanced
- Gasket Outside Diameter: 2.438
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Silicone anti-drain back valve helps ensure safe engine start up
- Proven protection for up to 10,000 miles (16,000 kilometers)
- SureGrip® technology for easy install and removal
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Toyota MR2 | L | 1998 | 4 Cyl 2.0L | 122 |
- FRAM, PH3614, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Grade: Advanced
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 04E 115 561T, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Toyota T100 | V | 2959 | 6 Cyl 3.0L | - |
- FRAM, XG3614, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: 3/4-16
- Grade: Ultimate
- Gasket Outside Diameter: 2.760
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 04E 115 561T, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Toyota Pickup | V | 2959 | 6 Cyl 3.0L | - |
Showing 1 - 10 of 20 products
Loading...