Image
Product
Price
- Curved Radiator Hose
- Product Attributes:
- : .63
- Trunk Height: 3 1/4
- Color: Black
- Contains Heat Shield: N
- Centerline Length: 3.25
- End 1 Inside Diameter:
- .63
- 5/8
- Hose Type: Single I.d. Hose
- SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
- Contains Protective Sleeve: N
- Material: Epdm
- End 2 Inside Diameter: 5/8
This Part Fits the Following OEM/Substitute Numbers:
10042686, 10087632, 10160, 14100667, 142-0801, 142-5941, 142-5962, 14207S, 14605S, 15708634, 15708636, 16261-63010, 16261-64070, 16261-88360, 16261-88361, 16261-88380, 16283-42010, 169192-R1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Toyota Tundra | V | 3956 | Pipe-1 To Engine | 6 Cyl 4.0L | 241 |
- w/Rear Air
- Small I.D. Heater Hose
- Product Attributes:
- : .63
- Centerline Length: 14
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
11143, 11410, 16248M, 16394M, 19143, 19410, 63989, 79721-SV4-000, 87245-48600, E87888
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Toyota Highlander | L | 2362 | Bypass To Tee | 4 Cyl 2.4L | - |
- Heater Hose Insulone Black
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
28411, 28431, 30124, 30141, 65023, H153, H166
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Toyota Sienna | Pipe To Heater Inlet Pipe |
- Hose Connector (Plastic)
- Product Attributes:
- End 1 Outside Diameter:
- .625
- 15.9
- Type: Straight Connector
- End 1 Outside Diameter:
-
Features:
- Using straight, elbow and tee shapes almost any hose configuration can be constructed
- Glass reinforced nylon resists chemicals, gasoline, diesel fuels and temperatures from -40°F to 480°F (-40°C to 250°C)
- Bulkheads assure proper insertion depths
- Anti-rotation device prevents hose twisting
- Gates Heater Hose and Fuel Line Connectors use a unique single barb design to provide greater sealability between single or dual inside diameter hoses.
This Part Fits the Following OEM/Substitute Numbers:
28263A, 28604, 324000, 34123, 43000, 47094, 48480, 5101, 64092, 65095, 65624, 80422, 80422-5, 80431, 80431-5, 80461, 80653, 80653-5...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Toyota Tacoma | V | 3956 | Bottom Heater Hose-1 To Hose-2 | GAS | 6 Cyl 4.0L | 241 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 175
- 6.9
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10028411, 11670, 12550548, 1405597E12, 14187S, 15083590, 1626131050, 19670, 22818359, 25522996, 25740125, 63081, 8724595D20, 88387, 88472, 89024985, 8943703372, 8970718651...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Toyota RAV4 | V | 3456 | Thermostat To Pipe | GAS | 6 Cyl 3.5L | - |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 180
- 7.1
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .59
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10242185, 11025, 12593464, 14155S, 15294018, 19025, 25862087, 63348, 63980, 63981, 71877, 8720904040, 872450C280, 872453D500, A71877, A90897, E92579, G922B48010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Toyota Tacoma | V | 3956 | Heater To Connector | GAS | 6 Cyl 4.0L | 241 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 152
- 6
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .59
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10182356, 11026, 12590279, 12600100, 14156S, 19026, 626-107, 63121, 71692, 72337, 872450C260, A71692, B72337, F58Z 18472 R
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Toyota Tundra | V | 4663 | Heater Inlet | GAS | 8 Cyl 4.7L | 285 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .5
- 13
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
1319350G01, 14055ET110, 140561M200, 1405684A10, 14242S, 1626474101, 1626774081, 1628250030, 1628250070, 19508689010, 19508PB3000, 19522PV0000, 213067S010, 28460, 3441140, 52003882, 5862024010, 63706...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Toyota Sequoia | V | 4663 | Pipe-3 To Oil Cooler | GAS | 8 Cyl 4.7L | 285 |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Toyota Highlander | V | 3300 | Engine To Tee | GAS | 6 Cyl 3.3L | 202 |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Toyota Tundra | V | 4663 | Pipe-3 To Pipe-4 | 8 Cyl 4.7L | 285 |
Showing 1 - 10 of 78 products
Loading...