Select a vehicle to find exact fit parts

Back to vehicles list

Shop By Product Matching "HVAC"

Choose a Model for your 1987 Mazda

323 626 B2000 B2200 B2600 RX-7

Showing 1 - 9 of 9 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1987 Mazda 323 HVAC Heater Hose - Intake Manifold To Throttle Body 4 Cyl 1.6L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 244
  - 9.6
- End 1 Inside Diameter:
  - .25
  - 6
- Material: Epdm
- End 2 Inside Diameter:
  - .25
  - 6
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0K24715281D, 10010, 1319171C50, 1319172C50, 14000S, 1405453F11, 15802763, 1626111060, 1626764010, 1734376010, 18010, 19130290, 19130424, 19524P5A000, 19528P3FA50, 22633443, 22717008, 22733960...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Mazda 323	L	1597	Intake Manifold To Throttle Body	GAS	4 Cyl 1.6L	-

1 In Stock

Limited-Time Offer

$21.65 USD

$25.98 USD


Brand	Gates
Part #	GRC18010
Condition	New
Warehouse	B

UPC: 072053178005

1987 Mazda RX-7 HVAC Heater Hose - Pipe To Engine 2 Cyl 1.3L Gates

Cut to fit
90 Degree Molded Heater Hose
Product Attributes:
- Molded: Yes
- Centerline Length:
  - 16
  - 406
- End 1 Inside Diameter:
  - .625
  - 16
- Angle: 90
- Arm Length:
  - 102
  - 305
  - 4
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
- Quick Connect Fitting Quantity: 0
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.

This Part Fits the Following OEM/Substitute Numbers:

10007473, 10014215, 10014330, 10014332, 10014672, 1007473, 10157913, 118658, 14052460, 14052473, 14100798, 15555229, 15642507, 1594657, 15963868, 15963869, 16198M, 1641237...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Mazda RX-7	R	1308	Pipe To Engine	GAS	2 Cyl 1.3L	-

7 In Stock

Limited-Time Offer

$25.09 USD

$30.11 USD


Brand	Gates
Part #	GRC28467
Condition	New
Warehouse	B

UPC: 072053062014

1987 Mazda B2600 HVAC Heater Hose - Pipe-3 To Throttle Body 4 Cyl 2.6L Gates

Cut to Length, 3"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .625
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Mazda B2600	L	2555	Pipe-3 To Throttle Body	GAS	4 Cyl 2.6L	156

4 In Stock

Limited-Time Offer

$86.06 USD

$103.27 USD


Brand	Gates
Part #	GRC28411
Condition	New
Warehouse	B

UPC: 072053066319

1987 Mazda 323 HVAC Heater Pipe O-Ring Ishino Stone

1987 Mazda 323 HVAC Heater Pipe O-Ring Ishino Stone

Heater Pipe to Water Pump

Additional Fitment Information:

Vehicle	Body
1987 - Mazda 323	Wagon

20 In Stock

Bargain Price

$2.82 USD

$3.38 USD


Brand	Ishino Stone
Part #	ISH1757087
Condition	New
Warehouse	A

1987 Mazda B2000 HVAC Blower Motor VDO

If possible check the old motors OE # in the X-Ref file. Threaded shaft.
Motor Only
A/C & Heater

Additional Fitment Information:

Vehicle
1987 - Mazda B2000


Brand	VDO
Part #	VDO1616585
Condition	New
Warehouse	A

1987 Mazda B2200 HVAC Heater Hose - Intake Manifold To Pipe 4 Cyl 2.2L Gates

1987 Mazda B2200 HVAC Heater Hose - Intake Manifold To Pipe 4 Cyl 2.2L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 216
  - 8.5
- End 1 Inside Diameter:
  - .28
  - 7
- Material: Epdm
- End 2 Inside Diameter:
  - .28
  - 7
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10100, 12804553, 1349380J00, 14008S, 18100, 19506P2A000, 19526P5AA10, 63338, 64226, 86824, B86824, F2G813282A, F2G813681, G60913681, G60913682, K80213682, KB6KP13681, KL0113682A...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Mazda B2200	L	2184	Intake Manifold To Pipe	GAS	4 Cyl 2.2L	-


Brand	Gates
Part #	18100
Condition	New
Warehouse	A

UPC: 072053191561

1987 Mazda 626 HVAC Heater Hose - Heater Hose Dayco

Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single

This Part Fits the Following OEM/Substitute Numbers:

0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1987 - Mazda 626	Heater Hose


Brand	Dayco
Part #	80401
Condition	New

FREE SHIPPING on order over $100 USD shipped from same warehouse

1987 Mazda RX-7 HVAC Heater Hose - Pipe To Engine Dayco

Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single

Additional Fitment Information:

Vehicle	Position	Aspiration
1987 - Mazda RX-7	Pipe To Engine	Turbocharged


Brand	Dayco
Part #	80401
Condition	New

FREE SHIPPING on order over $100 USD shipped from same warehouse

1987 Mazda RX-7 HVAC Heater Hose - Throttle Body To Intake Manifold 2 Cyl 1.3L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 244
  - 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE

Additional Fitment Information: