Select a vehicle to find exact fit parts

Back to vehicles list

Shop By Product Matching "HVAC"

Choose a Model for your 1987 Nissan

200SX 300ZX D21 Maxima Multi Pathfinder Pulsar NX Sentra Stanza Tsuru Van

Showing 1 - 10 of 36 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1987 Nissan Maxima HVAC Heater Hose - Valve To Pipe 6 Cyl 3.0L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 180
  - 7.1
- End 1 Inside Diameter:
  - .58
  - 15
- Material: Epdm
- End 2 Inside Diameter:
  - .58
  - 15
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10453, 1405516E05, 14314S, 15138450, 15832905, 18453, 1L2Z 18472 BD, 1L2Z 18472 NA, 1L2Z 18472 PA, 22646764, 807615182, 89023416, 89025001, F10037, KH-72, KH-73, KH101

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Nissan Maxima	V	2960	Valve To Pipe	GAS	6 Cyl 3.0L	181

1 In Stock

Limited-Time Offer

$26.90 USD

$32.28 USD


Brand	Gates
Part #	GRC18453
Condition	New
Warehouse	B

UPC: 072053468182

1987 Nissan Pulsar NX HVAC Heater Hose - Intake Manifold To Pipe-4 4 Cyl 1.6L Gates

Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 191
  - 7.5
- End 1 Inside Diameter:
  - .62
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .62
  - 16
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10801, 14-2642-8, 1405555M05, 1405640F00, 14108S, 15984158, 1626138010, 18801, 24500341, 25515149, 25524572, 25535149, 3034, 3041, 43029, 63029, 642218, 642230...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine Designation	Fuel Type	Engine	CID
1987 - Nissan Pulsar NX	L	1597	Intake Manifold To Pipe-4	CA16DE	GAS	4 Cyl 1.6L	97

1 In Stock

Limited-Time Offer

$19.82 USD

$23.78 USD


Brand	Gates
Part #	GRC18801
Condition	New
Warehouse	B

UPC: 072053179446

1987 Nissan Van HVAC Heater Hose - Auxiliary Heater Pipe-2 To Tee-1 4 Cyl 2.4L Gates

Cut to fit
90 Degree Molded Heater Hose
Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
  - .5
  - 13
- Angle: 90
- Arm Length:
  - 102
  - 152
  - 4
  - 6
- Material: Epdm
- End 2 Inside Diameter:
  - .5
  - 13
- Quick Connect Fitting Quantity: 0
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.

This Part Fits the Following OEM/Substitute Numbers:

1319350G01, 14055ET110, 140561M200, 1405684A10, 14242S, 1626474101, 1626774081, 1628250030, 1628250070, 19508689010, 19508PB3000, 19522PV0000, 213067S010, 28460, 3441140, 52003882, 5862024010, 63706...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Nissan Van	L	2389	Auxiliary Heater Pipe-2 To Tee-1	GAS	4 Cyl 2.4L	-

9 In Stock

Limited-Time Offer

$17.42 USD

$20.90 USD


Brand	Gates
Part #	GRC28460
Condition	New
Warehouse	B

UPC: 072053061949

1987 Nissan Sentra HVAC Heater Hose - Oil Cooler To Engine 4 Cyl 1.7L Gates

Cut to fit
Molded Coolant Hose
Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
  - 168
  - 6.6
- End 1 Inside Diameter:
  - .62
  - 16
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
  - .62
  - 16
- Quick Connect Fitting Quantity: 0
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:

14-2572-4, 14228S, 1L2Z 18472 CA, 2130616A00, 2130616A01, 21738, 63052, 8429, 87245124080, 8725124080, 8970799970, BP1738, C1738, E6DH 18D334 DA, E6DZ 18472 A, E8DZ 18472 D, E8DZ 18472 DA, E9DH 18D334 BA...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Nissan Sentra	L	1688	Oil Cooler To Engine	DIESEL	4 Cyl 1.7L	-

3 In Stock

Limited-Time Offer

$26.62 USD

$31.94 USD


Brand	Gates
Part #	GRC21738
Condition	New
Warehouse	B

UPC: 072053060478

1987 Nissan 300ZX HVAC Heater Hose - Pipe To Intake Manifold 6 Cyl 3.0L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 15.6
  - 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Nissan 300ZX	V	2960	Pipe To Intake Manifold	GAS	6 Cyl 3.0L	181

1 In Stock

Limited-Time Offer

$21.92 USD

$26.30 USD


Brand	Gates
Part #	GRC18031
Condition	New
Warehouse	B

UPC: 072053178050

1987 Nissan 300ZX HVAC Heater Hose - Heater To Pipe-1 6 Cyl 3.0L Gates

Hose is inside vehicle under dashboard.; Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 244
  - 9.6
- End 1 Inside Diameter:
  - .62
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10070, 10080350, 10145080, 10145101, 10284262, 14004S, 18070, 19130282, 1W7H 18K580 AB, 1W7Z 18472 AB, 2714401P00, 64429, 86003, 86006, 86010, 87603, 87918, 96455704...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Nissan 300ZX	V	2960	Heater To Pipe-1	GAS	6 Cyl 3.0L	181

1 In Stock

Limited-Time Offer

$32.49 USD

$38.99 USD


Brand	Gates
Part #	GRC18070
Condition	New
Warehouse	B

UPC: 072053178081

1987 Nissan 300ZX HVAC Heater Hose - Pipe To Intake Manifold Dayco

Small I.D. Heater Hose
Product Attributes:
- : .38
- Centerline Length: 12.50
- End 1 Inside Diameter: .38
- Type: Single

This Part Fits the Following OEM/Substitute Numbers:

10031, 14056-30R60, 14056-V5007, 16002M, 16264-76040, 18031, 303001, 4364, 63101, D87001

Additional Fitment Information:

Vehicle	Position
1987 - Nissan 300ZX	Pipe To Intake Manifold


Brand	Dayco
Part #	D3587001
Condition	New
Warehouse	B

1987 Nissan 200SX HVAC Heater Hose - Heater Hose 6 Cyl 3.0L Dayco

Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single

This Part Fits the Following OEM/Substitute Numbers:

0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1987 - Nissan 200SX	V	2960	Heater Hose	6 Cyl 3.0L	181


Brand	Dayco
Part #	80401
Condition	New

FREE SHIPPING on order over $100 USD shipped from same warehouse

1987 Nissan 200SX HVAC Heater Hose - Heater To Pipe-1 6 Cyl 3.0L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 244
  - 9.6
- End 1 Inside Diameter:
  - .62
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10079, 10145763, 10241617, 12386911, 14005S, 15652879, 15668784, 15781525, 18079, 19129802, 22729506, 63223, 64325, 64425, 8156528790, 86112, 86115, 8724550360...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1987 - Nissan 200SX	V	2960	Heater To Pipe-1	GAS	6 Cyl 3.0L	181


Brand	Gates
Part #	18079
Condition	New

FREE SHIPPING on order over $100 USD shipped from same warehouse

UPC: 072053178173

1987 Nissan Stanza HVAC Heater Hose - Thermostat To Pipe 4 Cyl 2.0L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length: 305
- End 1 Inside Diameter:
  - .62
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .62
  - 16
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10700, 14075S, 15119415, 15755537, 15762808, 15762809, 18700, 19407N9602, 19508P3F010, 19508PE2000, 2130713E00, 225294, 4306, 4462639, 4540021, 4677016, 63020, 63110...VIEW MORE

Additional Fitment Information: