Image
Product
Price
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10020454, 10065590, 10087632, 133643R1, 14-2660-4, 14034345, 14100667, 14211S, 1555179, 1945061, 2001, 2004, 2012, 20618, 22602073, 230572, 23121, 25502711...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1990 - Lincoln Mark VII | V | - | Heater To Pipe-1 | GAS | 8 Cyl 5.0L | 302 |
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Lincoln Town Car |
- When replacing the switch, also replace the O-Ring - N807083S
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Lincoln Mark VII |
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Lincoln Town Car |
- HVAC Blower Motor Resistor For Mercury Grand Marquis Ford Crown Victoria Lincol
- without Automatic Temp Control without Connector
- Mpulse HVAC Blower Motor Resistor SEN-2BMR0614 For Mercury Grand Marquis Ford Crown Victoria Lincoln Town Car Marauder Mark VI LTD Colony Park Country Squire
- Mpulse
- Product Attributes:
- WebNameEbay4: For Mercury Grand Marquis Ford Crown Car Hvac Blower Motor Resistor Sen-2bmr0614
- ComponentsSummaryRegularWithBrands: Mpulse Hvac Blower Motor Resistor
- ComponentsSummaryShort: Hvac Blower Motor Resistor
- ComponentsSummaryLongWithBrands: 1x Mpulse Hvac Blower Motor Resistor
- WebNamePlain: Mpulse Hvac Blower Motor Resistor Sen-2bmr0614
- ComponentsSummaryShortWithBrands: Mpulse Hvac Blower Motor Resistor
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Hvac Blower Motor Resistor
- WebNameLong: Mpulse Hvac Blower Motor Resistor Sen-2bmr0614 For Mercury Grand Marquis Ford Crown Victoria Lincoln Town Car Marauder Mark Vi Ltd Colony Park Country Squire
- WebNameShort: Hvac Blower Motor Resistor Sen-2bmr0614 For Mercury Grand Marquis Ford Crown Victoria Lincoln Town
- ComponentsSummaryRegular: Hvac Blower Motor Resistor
- WebNameRegular: Mpulse Hvac Blower Motor Resistor Sen-2bmr0614 For Mercury Grand Marquis Ford Crown Victoria Lincoln Town Car Marauder Mark Vi Ltd Colony Park Country Squire
- WebNameEbay2: Hvac Blower Motor Resistor Sen-2bmr0614 For Mercury Grand Marquis Ford Crown
- WebNameEbay3: Hvac Blower Motor Resistor Sen-2bmr0614 For Mercury Grand Marquis Ford Crown Car
- WebNameEbay: Hvac Blower Motor Resistor For Mercury Grand Marquis Ford Crown Victoria Lincoln
-
Features:
- mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
- Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
- Made with corrosion-free coating for highest durability on the market
- Direct plug-in OE replacement for proper fit and function for an unmatched experience
- mPulse offers an extensive range of sensors that restores your vehicle to factory levels of performance
- Part Reference Numbers : 4P1379 RU1097 973-413 2BMR0614 BR307 E3AZ-19A706-A RU403
- Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2BMR0614, 4P1379, 973-413, BR307, E3AZ-19A706-A, N/A, RU1097, RU403
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Lincoln Town Car |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10079, 10145763, 10241617, 12386911, 14005S, 15652879, 15668784, 15781525, 18079, 19129802, 22729506, 63223, 64325, 64425, 8156528790, 86112, 86115, 8724550360...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1990 - Lincoln Continental | V | - | Pipe To Water Pump | GAS | 6 Cyl 3.8L | 232 |
- W/Auto. Temp. Control; Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10070, 10080350, 10145080, 10145101, 10284262, 14004S, 18070, 19130282, 1W7H 18K580 AB, 1W7Z 18472 AB, 2714401P00, 64429, 86003, 86006, 86010, 87603, 87918, 96455704...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1990 - Lincoln Continental | V | - | Heater To Valve | GAS | 6 Cyl 3.8L | 232 |
Showing 1 - 7 of 7 products
Loading...