Image
Product
Price
- Flanged Vented CW Blower Motor with Wheel
- with Wheel 1 Term Use when replacing a one terminal motor
- Flanged Vented CW Blower Motor with Wheel
- Blower Motor
- Product Attributes:
- Motor Dia. MM: 82.55
- Rotation: Cw
- Connector Gender: Male
- Vented?: Vented
- New or Reman: New
- Wheel Dia. IN: 5.750
- Wheel?: W/ Wheel
- Wheel Height IN: 3.625
- Motor Dia. IN: 3.250
- Flanged?: Yes
- Motor Length MM: 109.55
- Part Note: Use When Replacing A One Terminal Motor
- Motor Length IN: 4.31
- Description: Blower Motor Assy /flanged
- Connector Qty: 1
- O.E. Replacement?: Yes
- Shaft Length IN: 1.31
- Type: Blower Motors
- Material: Metal
-
Features:
- Meets or exceeds OE design and performance
- Windings meet or exceed OEM specifications
- Magnetic size and properties compare or exceed OEM
- Motor RPM equivalent to or exceeds OEM motor
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
010208, 010209, 02510, 02540, 02667, 100023, 1010004, 10208, 11135334V, 11135338, 11135338V, 1580213, 158400, 158433, 158435, 158531, 158550, 158578...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Volvo 740 |
- Flanged Vented CW Blower Motor w/o Wheel
- w/o Wheel 1 Term
- Flanged Vented CW Blower Motor w/o Wheel
- Blower Motor
- Product Attributes:
- Rotation: Cw
- Shaft Shape: Round
- Connector Gender: Male
- Vented?: Vented
- New or Reman: New
- Wheel Dia. IN: Yes
- Wheel?: W/o Wheel
- Motor Dia. IN: 3.250
- Flanged?: Yes
- Motor Length IN: 4.31
- Description: Blower Motor /flanged
- Connector Qty: 1
- O.E. Replacement?: Yes
- Shaft Length IN: 1.31
- Type: Blower Motors
- Material: Metal
-
Features:
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Meets or exceeds OE design and performance
- Motor RPM equivalent to or exceeds OEM motor
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
010201, 010203, 0217032, 02503, 02508, 02527, 100004, 100020, 1010005, 1010016, 10201, 10203, 1099003, 11135584V, 11135588V, 1120060, 13728, 158100...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Volvo 940 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10007473, 10014215, 10014330, 10014332, 10014672, 1007473, 10157913, 118658, 14052460, 14052473, 14100798, 15555229, 15642507, 1594657, 15963868, 15963869, 16198M, 1641237...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1992 - Volvo 240 | L | 2316 | Heater To Pipe | GAS | 4 Cyl 2.3L | - |
- Coupling #9125615 is needed when replacing earlier version #1259327 Heater Valve. Vehicle manufactures often use several sources for heater valves on a particular model. For that reason the replacement valve supplied may not always look exactly like the valve being replaced. In these instances the part supplied will fit and function to O.E. specifications.
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Volvo 960 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Heater
w/o Cage - On models through 1981, if the vehicle is still equipped with the original 3-speed blower motor, the following parts will also be required for installation: 1323849 fan switch (1), 1370240 resistor (1), and 969478 screw (3).
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Volvo 240 |
- 80 Deg. fitting with same diameter holes on both ends - small. Quanitity per car as needed. Also used when replacing earlier version #1259327 Heater Valve.
- 90 Deg. fitting with same diameter holes on both ends - small. Quanitity per car as needed. Also used when replacing earlier version #1259327 Heater Valve.
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Volvo 960 |
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Volvo 940 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with 2-Pin Connector
- There is 2-different versions of this fan motor, both have the mounting flange adaptor that allows this fan motor to be used on the earlier models that originally came with fan motor #3506325, while both will work, it may take some wiring mods to be made. The OEA version only has the 2-pin pigtail ,the AIR/ VIS version also contains the wiring adaptor to convert the 1-pin ( old style ) to the newer 2-pin style. The OEA version should be a direct replacement for 1989.5 + 740/940 Models.
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Volvo 940 |
- Inlet - Heater to Engine
- When installing this hose, it will be necessary to cut a section out of it for the heater valve. Use the original hose (with heater valve) as a template to determine where to cut and either reuse the same heater valve or install a new heater valve (not included; order separately) on the replacement hose.
- Inlet - Engine to Heater
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Volvo 960 |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 1992 - Volvo 740 | Heater Hose | Naturally Aspirated |
Showing 1 - 10 of 23 products
Loading...