Select a vehicle to find exact fit parts

Back to vehicles list

Shop By Product Matching "HVAC"

Choose a Model for your 1994 Nissan

240SX 300ZX Altima Axxess D21 Maxima Pathfinder Pickup Quest Sentra Tsuru

Showing 1 - 10 of 64 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1994 Nissan Maxima HVAC Heater Hose - Pipe To Pipe 6 Cyl 3.0L Gates

Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 175
  - 6.9
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10028411, 11670, 12550548, 1405597E12, 14187S, 15083590, 1626131050, 19670, 22818359, 25522996, 25740125, 63081, 8724595D20, 88387, 88472, 89024985, 8943703372, 8970718651...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Cylinder Head Type	Fuel Type	Engine	CID
1994 - Nissan Maxima	V	2960	Pipe To Pipe	DOHC	GAS	6 Cyl 3.0L	181

1 In Stock

Limited-Time Offer

$20.10 USD

$24.12 USD


Brand	Gates
Part #	GRC19670
Condition	New
Warehouse	B

UPC: 072053179095

1994 Nissan Axxess HVAC Heater Hose - Pipe To Throttle Body 4 Cyl 2.4L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 15.6
  - 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1994 - Nissan Axxess	L	2389	Pipe To Throttle Body	GAS	4 Cyl 2.4L	-

1 In Stock

Limited-Time Offer

$21.31 USD

$25.57 USD


Brand	Gates
Part #	GRC18031
Condition	New
Warehouse	B

UPC: 072053178050

1994 Nissan Quest HVAC Heater Hose - Heater To Tee (Outlet) 6 Cyl 3.0L Gates

W/Aux. Heater; Protective sleeve required; Cut to fit
90 Degree Molded Heater Hose
Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
  - .75
  - 19
- Angle: 90
- Arm Length:
  - 102
  - 152
  - 4
  - 6
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
- Quick Connect Fitting Quantity: 0
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

10017940, 10065640, 10065675, 10120065, 10135307, 10145119, 10188037, 10218423, 10227419, 10385281, 10441374, 1405531U00, 1405646R00, 1405670F05, 14244S, 15077061, 15123654, 15258060...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1994 - Nissan Quest	V	2960	Heater To Tee (Outlet)	GAS	6 Cyl 3.0L	181

2 In Stock

Limited-Time Offer

$18.51 USD

$22.21 USD


Brand	Gates
Part #	GRC28474
Condition	New
Warehouse	B

UPC: 072053062083

1994 Nissan Axxess HVAC Heater Hose - Valve To Engine 4 Cyl 2.4L Gates

Cut to Length, 4"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1994 - Nissan Axxess	L	2389	Valve To Engine	GAS	4 Cyl 2.4L	-


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

1994 Nissan Altima HVAC Heater Hose - Heater To Pipe-2 4 Cyl 2.4L Gates

Cut to Length, 12"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1994 - Nissan Altima	L	2389	Heater To Pipe-2	GAS	4 Cyl 2.4L	-


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

1994 Nissan Quest HVAC Heater Hose - Tee To Engine (Outlet) 6 Cyl 3.0L Gates

W/Aux. Heater; Cut to Length, 14"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1994 - Nissan Quest	V	2960	Tee To Engine (Outlet)	GAS	6 Cyl 3.0L	181


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

1994 Nissan Axxess HVAC Heater Hose - Pipe-3 To Pipe-4 4 Cyl 2.4L Gates

Cut to Length, 4"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1994 - Nissan Axxess	L	2389	Pipe-3 To Pipe-4	GAS	4 Cyl 2.4L	-


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

1994 Nissan Maxima HVAC Heater Hose - Pipe-1 To Engine 6 Cyl 3.0L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 244
  - 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Cylinder Head Type	Fuel Type	Engine	CID
1994 - Nissan Maxima	V	2960	Pipe-1 To Engine	SOHC	GAS	6 Cyl 3.0L	181


Brand	Gates
Part #	18020
Condition	New

FREE SHIPPING on order over $100 USD shipped from same warehouse

UPC: 072053178029

1994 Nissan Axxess HVAC Heater Hose - Engine To Valve 4 Cyl 2.4L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 244
  - 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1994 - Nissan Axxess	L	2389	Engine To Valve	GAS	4 Cyl 2.4L	-


Brand	Gates
Part #	18020
Condition	New

FREE SHIPPING on order over $100 USD shipped from same warehouse

UPC: 072053178029

1994 Nissan Pathfinder HVAC Heater Hose - Pipe-1 To Breather 6 Cyl 3.0L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 244
  - 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.