Shop By Product Matching "HVAC"
Choose a Model for your 1996 Dodge
Image
Product
Price
- HVAC Blower Motor Resistor
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Mounting Hardware Included:
-
Features:
- Direct replacement - this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance - fixes a fan that's only operating on one speed or not working at all
- Thoroughly tested - examined and validated to perform safely and effectively
- Trustworthy quality - backed by team of engineers and inspectors in the United States
- Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20116, 3A1049, 4720278, 68004241AA, CR153, RU109, RU109T, RU876
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Dodge Ram 1500 |
- HVAC Blower Motor Resistor
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Mounting Hardware Included:
-
Features:
- Direct replacement - this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance - fixes a fan that's only operating on one speed or not working at all
- Thoroughly tested - examined and validated to perform safely and effectively
- Trustworthy quality - backed by team of engineers and inspectors in the United States
- Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20113, 4596191, 4644833, 4644833AB, 4885844AA, 4885845AA, 4P1325, JA1463, JA1552, RU104, RU897
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Dodge Stratus |
- HVAC Blower Motor Resistor
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Mounting Hardware Included:
-
Features:
- Direct replacement - this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance - fixes a fan that's only operating on one speed or not working at all
- Thoroughly tested - examined and validated to perform safely and effectively
- Trustworthy quality - backed by team of engineers and inspectors in the United States
- Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20263, 3A1048, 4677180, 4677180AB, 4677180AD, BMR011, CR154, RU916, RU93
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Dodge Grand Caravan | Front |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 11.9
- 302
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11705, 16184M, 1787185Z00, 19705, 1C0121036D, 1C0121086K, 1J0121073A, 25654621, 25708701, 25740133, 64324, 88438, 92411JK60A, 96456718, 96553218, D88438
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Dodge Intrepid | V | 3497 | Tee-2 To Reservoir | GAS | 6 Cyl 3.5L | 215 |
- W/Aux. Heater; Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 180
- 7.1
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .59
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10242185, 11025, 12593464, 14155S, 15294018, 19025, 25862087, 63348, 63980, 63981, 71877, 8720904040, 872450C280, 872453D500, A71877, A90897, E92579, G922B48010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Dodge Caravan | V | 2972 | Heater To Pipe-2 | GAS | 6 Cyl 3.0L | 181 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 168
- 6.6
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .62
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
14-2572-4, 14228S, 1L2Z 18472 CA, 2130616A00, 2130616A01, 21738, 63052, 8429, 87245124080, 8725124080, 8970799970, BP1738, C1738, E6DH 18D334 DA, E6DZ 18472 A, E8DZ 18472 D, E8DZ 18472 DA, E9DH 18D334 BA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Dodge Grand Caravan | L | 2429 | Pipe-2 To Water Pump | GAS | 4 Cyl 2.4L | 148 |
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 559
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 18
- 4
- 457
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10005279, 10021300, 100221566, 14083694, 14083734, 15530587, 15570994, 15963896, 18149L, 1885892, 1885937, 1886330, 2096933, 254364R000, 25509306, 2837183, 28468, 294018...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Dodge Ram 2500 | V | 5211 | Connector To Engine | CNG | 8 Cyl 5.2L | 318 |
- Flanged Vented CW/CCW Blower Motor w/o Wheel
- w/o Wheel with AC
- Flanged Vented CW/CCW Blower Motor w/o Wheel
- Blower Motor
- Product Attributes:
- Rotation: Cw/ccw
- Shaft Shape: D-shaped
- Connector Gender: None
- Vented?: Vented
- New or Reman: New
- Wheel Dia. IN: Yes
- Wheel?: W/o Wheel
- Motor Dia. IN: 3.250
- Flanged?: Yes
- Motor Length IN: 4.44
- Description: Blower Motor /flanged
- Connector Qty: None
- O.E. Replacement?: Yes
- Shaft Length IN: 1.500
- Type: Blower Motors
- Material: Metal
-
Features:
- Motor RPM equivalent to or exceeds OEM motor
- Magnetic size and properties compare or exceed OEM
- Meets or exceeds OE design and performance
- Windings meet or exceed OEM specifications
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
010301, 010304, 02313, 100074, 100095, 100102, 100215, 11135474V, 1580130, 1580402, 158284, 158382, 158392, 15870, 19189152, 200060, 20256, 208915...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Dodge B2500 | Front |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Dodge Grand Caravan | V | 3778 | Heater Outlet | 6 Cyl 3.8L | 231 |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Dodge Ram 2500 | V | 7990 | Heater Inlet | 10 Cyl 8.0L | 488 |
Showing 1 - 10 of 86 products
Loading...