Image
Product
Price
- Blower Motor Resistor Kit with Harness
- Product Attributes:
- Connector Gender:
- Female
- Hembra
- Gasket Or Seal Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Wiring Harness Included:
- Oui
- Sí
- Yes
- Wiring Harness Length: 6
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Terminal Type:
- Aspa
- Blade
- Mounting Hole Quantity: 2
- Terminal Gender:
- Macho
- Male
- Terminal Quantity: 4
- Wire Quantity: 4
- Connector Gender:
-
Features:
- Direct replacement - this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
- Complete kit - each kit comes with a resistor and harness pigtail, which is essential for most repairs
- Restores functionality - made to perform like original equipment to restore full HVAC operation
- Trustworthy quality - backed by team of engineers and quality specialists in the USA
- This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20289, 3A1273, 3A1299, 4P1315, 7801A156, 79330S5A941, 79330S5A942, 79330S7A941, 79330SDAA01, 79330SDGW51, 79330SFJW01, 79330SNAA01, APBMR009, APBMR011, JA1390, JA1404, JA1453, RU1060...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Acura TSX |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .25
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .25
- 6
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K24715281D, 10010, 1319171C50, 1319172C50, 14000S, 1405453F11, 15802763, 1626111060, 1626764010, 1734376010, 18010, 19130290, 19130424, 19524P5A000, 19528P3FA50, 22633443, 22717008, 22733960...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Acura RL | V | 3475 | Pipe-3 To Intake Manifold | GAS | 6 Cyl 3.5L | - |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10007473, 10014215, 10014330, 10014332, 10014672, 1007473, 10157913, 118658, 14052460, 14052473, 14100798, 15555229, 15642507, 1594657, 15963868, 15963869, 16198M, 1641237...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Acura RL | V | 3475 | Valve-1 To Pipe-1 | GAS | 6 Cyl 3.5L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .61
- 15
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .61
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0491210631, 1, 10042686, 1010, 10120087, 122310, 12604942, 1333180, 1370436, 14-1725-8, 142-0801, 142-5941, 14207S, 1489658, 15115123, 15612108, 15665113, 15727639...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Acura MDX | V | 3471 | Auxiliary Heater Inlet | GAS | 6 Cyl 3.5L | - |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0032224, 027004156, 05743507, 06006269, 07HS00043A, 07HS00044A, 0K01315421, 10002473, 10006390, 10018899, 10021318, 10038502, 10060964, 10065741, 10080395, 10135305, 10135333, 10145098...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Acura MDX | V | 3471 | Auxiliary Heater Outlet | GAS | 6 Cyl 3.5L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Power transistor.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Acura MDX | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Acura MDX | Rear |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Acura RL | Valve To Engine |
- Aluminum Heater Core
- Aluminum Heater Core
- Heater Core
- Product Attributes:
- Tube 1 MM: 279.4
- Tube 2 IN: 0.75
- Description: Heater Cores
- Tube 2 MM: 19.05
- Meets / Exceeds OEM?: Yes
- Core Depth IN: 0.625
- Tube 1 IN: 11
- Core Height IN: 6.75
- Type: Heater Core /aluminum
- Core Width IN: 10.75
- Material: Aluminum
-
Features:
- All Units Come With O.E Style Hardware for Easy Installation
- Quality Engineering for O.E. Fit, Form & Function
- Heavy Duty Construction for Product Durability
- Independently Tested for Proven Quality & Performance
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
1811730, 2754357, 399346, 551139, 79115SDAA01, 79115SEAG41, 8231506, 9010456, 92139, 98999, 99184, 99346, HT399346
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Acura TSX |
Showing 1 - 10 of 57 products
Loading...