Shop By Product Matching "HVAC"


Showing 1 - 10 of 106 products
Image
SKU
Product
Rating
Price

Dorman
  • Blower Motor Resistor Kit With Harness
  • w/Automatic Air Conditioning
  • Product Attributes:
    • Connector Gender:
      • Macho
      • Male
    • Gasket Or Seal Included:
      • No
      • Non
    • Mounting Hardware Included:
      • No
      • Non
    • Wiring Harness Included:
      • Oui
      • Yes
    • Wiring Harness Length: 30 Cm
    • Connector Quantity:
      • 1
      • 1 Ensamble De Manguera Del Calentador
    • Terminal Type:
      • Aspa
      • Blade
    • Mounting Hole Quantity: 2
    • Terminal Gender:
      • Macho
      • Male
    • Terminal Quantity: 3
    • Wire Quantity: 4
  • Features:
    • Direct replacement - this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
    • Complete kit - each kit comes with a resistor and harness pigtail, which is essential for most repairs
    • Restores functionality - made to perform like original equipment to restore full HVAC operation
    • Trustworthy quality - backed by team of engineers and quality specialists in the USA
  • This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

This Part Fits the Following OEM/Substitute Numbers:
20429, 20454, 2722670T03, 277613SB0A, 277614BA0A, 2776170T02, 2776170T03, 2BMR0234, 2BMR1009, 4P1687, 4P1727, BMR029, BMR054, JA1809, JA1849, RU1389, RU1477, RU700...VIEW MORE

Additional Fitment Information:
Vehicle Sub Model
2004 - Nissan Pathfinder SE

Dorman
  • HVAC Air Door Actuator - Inlet
  • Recirculation Packaging Type: Box
  • Product Attributes:
    • Terminal Type:
      • Clavija
      • Pin
    • Contenidos del paquete: 1 Actuador Neumático De La Puerta
    • Switch Activation Type:
      • Rotary
      • Rotatorio
    • Terminal Gender:
      • Macho
      • Male
    • Terminal Quantity: 2
    • Material:
      • Plastic
      • Plástico
  • Features:
    • Direct replacement - made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
    • Position specific - vehicles often have multiple different HVAC door actuators
    • review this part's application notes to verify it matches the location and function of the actuator you need to replace
    • Durable construction - designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
    • Trustworthy quality - backed by a team of experts and engineers in the United States, and more than a century of experience
  • This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don't know which actuator position you need to replace, consult a qualified service technician.

This Part Fits the Following OEM/Substitute Numbers:
277435Z010, 73297, DA1262

Additional Fitment Information:
Vehicle Position
2004 - Nissan TITAN Main

Dorman
  • HVAC Air Door Actuator - Inlet
  • Temperature Packaging Type: Box
  • Product Attributes:
    • Terminal Type:
      • Clavija
      • Pin
    • Contenidos del paquete: 1 Actuador Neumático De La Puerta
    • Switch Activation Type:
      • Rotary
      • Rotatorio
    • Terminal Gender:
      • Macho
      • Male
    • Terminal Quantity: 2
    • Material:
      • Plastic
      • Plástico
  • Features:
    • Direct replacement - made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
    • Position specific - vehicles often have multiple different HVAC door actuators
    • review this part's application notes to verify it matches the location and function of the actuator you need to replace
    • Durable construction - designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
    • Trustworthy quality - backed by a team of experts and engineers in the United States, and more than a century of experience
  • This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don't know which actuator position you need to replace, consult a qualified service technician.

Additional Fitment Information:
Vehicle Position
2004 - Nissan Pathfinder Armada Auxiliary

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 114
      • 4.5
    • End 1 Inside Diameter:
      • 1.08
      • 27
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.08
      • 27
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
140550W000, 140554S110, 20333S, 22518, 66683, 9151, A91649

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2004 - Nissan Xterra V 3275 Water Outlet Housing To Thermostat GAS 6 Cyl 3.3L -

Gates
  • Molded Heater Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Molded: Yes
    • Centerline Length:
      • 127
      • 5
    • End 1 Inside Diameter:
      • .5
      • 13
    • Material: Epdm
    • End 2 Inside Diameter:
      • .5
      • 13
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
    • Engineered to resist electrochemical degradation – the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:
10462, 140564S103, 14272S, 18462, 21338AA120, 3261680, 4746638, 64319, 807011071, 99078AA110, A91027, R41196

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2004 - Nissan Xterra V 3275 Engine Pipe To Pipe Assembly GAS 6 Cyl 3.3L -

Gates
  • Cut to fit
  • 90 Degree Molded Heater Hose
  • Product Attributes:
    • Molded: Yes
    • Centerline Length: 254
    • End 1 Inside Diameter:
      • .5
      • 13
    • Angle: 90
    • Arm Length:
      • 102
      • 152
      • 4
      • 6
    • Material: Epdm
    • End 2 Inside Diameter:
      • .5
      • 13
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Resists electrochemical degradation and water permeation
    • Use with heater hose connectors and bulk heater hose to create custom assemblies
    • Compatible for coolant, air and water applications
    • EPDM tube and cover, synthetic fiber reinforcement
    • SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
    • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
    • Caution: Do not use for fuel or oil transfer applications
  • It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.

This Part Fits the Following OEM/Substitute Numbers:
1319350G01, 14055ET110, 140561M200, 1405684A10, 14242S, 1626474101, 1626774081, 1628250030, 1628250070, 19508689010, 19508PB3000, 19522PV0000, 213067S010, 28460, 3441140, 52003882, 5862024010, 63706...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2004 - Nissan TITAN V 5552 Oil Cooler To Thermostat GAS 8 Cyl 5.6L -

Gates
  • Cut to Length, 5"
  • Straight Heater Hose (Standard)
  • Product Attributes:
    • Molded: No
    • Working Pressure: 60
    • Weight Per Length: 8.25 Lbs./carton
    • Centerline Length:
      • 15.24
      • 15240
      • 600
    • End 1 Inside Diameter:
      • .5
      • 13
    • Material: Epdm
    • End 2 Inside Diameter:
      • .5
      • 13
  • Features:
    • Good resistance to high temperatures for extended periods of time, which prolongs service life
    • Meets SAE 20R3 Standard Wall Class D-2 requirements
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Caution: Do not use for fuel or oil transfer applications
  • Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2004 - Nissan Xterra V 3275 Thermostat Pipe To Pipe Assembly GAS 6 Cyl 3.3L -

Gates
  • Cut to Length, 3 3/4"
  • Straight Heater Hose (Standard)
  • Product Attributes:
    • Molded: No
    • Working Pressure: 60
    • Weight Per Length: 8.25 Lbs./carton
    • Centerline Length:
      • 15.24
      • 15240
      • 600
    • End 1 Inside Diameter:
      • .5
      • 13
    • Material: Epdm
    • End 2 Inside Diameter:
      • .5
      • 13
  • Features:
    • Good resistance to high temperatures for extended periods of time, which prolongs service life
    • Meets SAE 20R3 Standard Wall Class D-2 requirements
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Caution: Do not use for fuel or oil transfer applications
  • Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
06A121497AA, 06A121497E, 09551D100, 100799100C, 10378155, 12608670, 12787736, 140551FJ0A, 14055EW600, 15077095, 15077147, 15181119, 15257756, 15710551, 15727309, 15763280, 15763290, 15834774...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2004 - Nissan Maxima V 3498 Oil Cooler Inlet GAS 6 Cyl 3.5L -

Gates
  • Cut to Length, 3 1/2"
  • Straight Heater Hose (Standard)
  • Product Attributes:
    • Molded: No
    • Working Pressure: 60
    • Weight Per Length: 8.25 Lbs./carton
    • Centerline Length:
      • 15.24
      • 15240
      • 600
    • End 1 Inside Diameter:
      • .5
      • 13
    • Material: Epdm
    • End 2 Inside Diameter:
      • .5
      • 13
  • Features:
    • Good resistance to high temperatures for extended periods of time, which prolongs service life
    • Meets SAE 20R3 Standard Wall Class D-2 requirements
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Caution: Do not use for fuel or oil transfer applications
  • Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2004 - Nissan Maxima V 3498 Oil Cooler To Pipe GAS 6 Cyl 3.5L -

Gates
  • Cut to Length, 3"
  • Straight Heater Hose (Standard)
  • Product Attributes:
    • Molded: No
    • Working Pressure: 60
    • Weight Per Length: 8.25 Lbs./carton
    • Centerline Length:
      • 15.24
      • 15240
      • 600
    • End 1 Inside Diameter:
      • .5
      • 13
    • Material: Epdm
    • End 2 Inside Diameter:
      • .5
      • 13
  • Features:
    • Good resistance to high temperatures for extended periods of time, which prolongs service life
    • Meets SAE 20R3 Standard Wall Class D-2 requirements
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Caution: Do not use for fuel or oil transfer applications
  • Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2004 - Nissan Xterra V 3275 Throttle Body To Pipe GAS 6 Cyl 3.3L -
Showing 1 - 10 of 106 products

Loading...