Select a vehicle to find exact fit parts

Back to vehicles list

Shop By Product Matching "HVAC"

Choose a Model for your 2007 Suzuki

Aerio Forenza Grand Vitara Reno SX4 XL-7

Showing 1 - 10 of 21 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2007 Suzuki Reno HVAC Heater Hose - Tee To Heater 4 Cyl 2.0L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 11.9
  - 302
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:

11705, 16184M, 1787185Z00, 19705, 1C0121036D, 1C0121086K, 1J0121073A, 25654621, 25708701, 25740133, 64324, 88438, 92411JK60A, 96456718, 96553218, D88438

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki Reno	L	1998	Tee To Heater	GAS	4 Cyl 2.0L	-

1 In Stock

Limited-Time Offer

$22.80 USD

$27.36 USD


Brand	Gates
Part #	GRC19705
Condition	New
Warehouse	B

UPC: 072053434286

2007 Suzuki XL-7 HVAC Heater Hose - Tee-2 To Pipe-1 6 Cyl 3.6L Gates

W/Rear A.C.
Molded Coolant Hose
Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
  - 168
  - 6.6
- End 1 Inside Diameter:
  - .62
  - 16
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
  - .62
  - 16
- Quick Connect Fitting Quantity: 0
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:

14-2572-4, 14228S, 1L2Z 18472 CA, 2130616A00, 2130616A01, 21738, 63052, 8429, 87245124080, 8725124080, 8970799970, BP1738, C1738, E6DH 18D334 DA, E6DZ 18472 A, E8DZ 18472 D, E8DZ 18472 DA, E9DH 18D334 BA...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki XL-7	V	3564	Tee-2 To Pipe-1	GAS	6 Cyl 3.6L	-

3 In Stock

Limited-Time Offer

$26.62 USD

$31.94 USD


Brand	Gates
Part #	GRC21738
Condition	New
Warehouse	B

UPC: 072053060478

2007 Suzuki Reno HVAC Heater Hose - Bypass To Tee 4 Cyl 2.0L Gates

Cut to Length, 18"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki Reno	L	1998	Bypass To Tee	GAS	4 Cyl 2.0L	-

1 In Stock

Limited-Time Offer

$107.00 USD

$128.40 USD


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

2007 Suzuki XL-7 HVAC Heater Hose - Tee-3 To Engine 6 Cyl 3.6L Gates

W/Rear A.C.; Cut to Length, 5"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki XL-7	V	3564	Tee-3 To Engine	GAS	6 Cyl 3.6L	-

1 In Stock

Limited-Time Offer

$107.00 USD

$128.40 USD


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

2007 Suzuki Reno HVAC Heater Hose - Heater To Pipe-1 4 Cyl 2.0L Gates

Cut to Length, 15"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki Reno	L	1998	Heater To Pipe-1	GAS	4 Cyl 2.0L	-

1 In Stock

Limited-Time Offer

$107.00 USD

$128.40 USD


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

2007 Suzuki XL-7 HVAC Heater Hose - Tee-2 To Engine 6 Cyl 3.6L Gates

W/Rear A.C.; Cut to Length, 5"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .75
  - 19
- Material: Epdm
- End 2 Inside Diameter:
  - .75
  - 19
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki XL-7	V	3564	Tee-2 To Engine	GAS	6 Cyl 3.6L	-

1 In Stock

Limited-Time Offer

$107.00 USD

$128.40 USD


Brand	Gates
Part #	GRC28412
Condition	New
Warehouse	B

UPC: 072053066326

2007 Suzuki XL-7 HVAC Heater Hose - Tee-3 To Pipe-2 6 Cyl 3.6L Gates

W/Rear A.C.; Cut to Length, 5"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .625
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki XL-7	V	3564	Tee-3 To Pipe-2	GAS	6 Cyl 3.6L	-

4 In Stock

Limited-Time Offer

$86.06 USD

$103.27 USD


Brand	Gates
Part #	GRC28411
Condition	New
Warehouse	B

UPC: 072053066319

2007 Suzuki XL-7 HVAC Heater Hose - Tee-1 To Tee-2 6 Cyl 3.6L Gates

W/Rear A.C.; Cut to Length, 2"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .625
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki XL-7	V	3564	Tee-1 To Tee-2	GAS	6 Cyl 3.6L	-

4 In Stock

Limited-Time Offer

$86.06 USD

$103.27 USD


Brand	Gates
Part #	GRC28411
Condition	New
Warehouse	B

UPC: 072053066319

2007 Suzuki Grand Vitara HVAC Heater Hose - Engine To Heater 6 Cyl 2.7L Gates

Cut to Length, 9"
Straight Heater Hose (Standard)
Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
  - 15.24
  - 15240
  - 600
- End 1 Inside Diameter:
  - .625
  - 16
- Material: Epdm
- End 2 Inside Diameter:
  - .625
  - 16
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2007 - Suzuki Grand Vitara	V	2737	Engine To Heater	GAS	6 Cyl 2.7L	-

4 In Stock

Limited-Time Offer

$86.06 USD

$103.27 USD


Brand	Gates
Part #	GRC28411
Condition	New
Warehouse	B

UPC: 072053066319

2007 Suzuki XL-7 HVAC Heater Hose - Pipe-3 To Engine 6 Cyl 3.6L Gates

Cut to fit
Molded Heater Hose
Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
  - 244
  - 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE

Additional Fitment Information: