Image
Product
Price
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .63
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .63
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11535, 14518S, 19535, 807615081, 87964, F10066
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Subaru Legacy | H | 2458 | Pipe-3 To Thermostat | DOHC | GAS | 4 Cyl 2.5L | - |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .63
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .63
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Subaru Outback | H | 2458 | Water Pump To Pipe-1 | SOHC | GAS | 4 Cyl 2.5L | - |
- Flanged Vented CCW Blower Motor with Wheel
- with Wheel with AC
- Flanged Vented CCW Blower Motor with Wheel
- Blower Motor
- Product Attributes:
- Rotation: Ccw
- Connector Gender: Female
- Vented?: Vented
- New or Reman: New
- Wheel Dia. IN: 6.250
- Wheel?: W/ Wheel
- Wheel Height IN: 2.750
- Motor Dia. IN: 3.000
- Flanged?: Yes
- Motor Length IN: 3.375
- Description: Blower Motor Assy /flanged
- Connector Qty: 1
- O.E. Replacement?: Yes
- Shaft Length IN: 1.500
- Type: Blower Motors
- Material: Plastic
-
Features:
- Magnetic size and properties compare or exceed OEM
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Windings meet or exceed OEM specifications
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
11175817, 1580644, 219151, 2311692, 2312049, 25770668, 3161, 325885, 33258002100, 5191345AA, 5191345AB, 6552358, 6552662, 6553393, 68048905AA, 68048905AB, 700203, 700289...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Subaru Tribeca | Front |
- HELLA Wiring Relay 965400071
- 12V - 4-Pin Connector - Wiring Diagram: S1 - Plug: A - Normally Open Contact - Color: Black - with Holder - Quantity: 1
- Product Attributes:
- Assy/Disassy by Qualified Personnel Required!: .
- Voltage: 12.00
- Quantity: 1
- IP Rating: Ip54
- Temperature range from [°F]: -40.00
- Temperature range to [°F]: 257.00
- California Proposition 65 Required: No
- Number of pins: 4
- Plug Type ID: A
- Temperature range [°F]: 176.00
- Color: Black
- Temperature range [°C]: 80
- Protection Type (IP Code): 54
- Ohmic Load [A]: 30
- Capacitive Load [A]: 5
- Capacity at 12V: 40a
- Combi Switch Function: Normally Open Contact
- Inductive Load [A]: 15
- Wiring Diagram: S1
-
Features:
- Provides consistent switching of high-current circuits for reliable electrical system operation in vehicles.
- Minimizes electromagnetic interference in sensitive systems with integrated resistor or diode suppression protection.
- Ensures dependable performance in extreme environments with an operating temperature range suitable for demanding conditions.
- Simplifies installation and replacement tasks with a standardized pin connectors designed for multiple automotive functions.
- Offers universal compatibility, ensuring seamless integration with most modern vehicles' electrical systems.
- HELLA Relay's manage key electrical circuits including central locking, lighting, and engine cooling fans. It is compatible with various 12V systems using a 4-pin connector for reliable operation. Our relay's ensure consistent performance for essential automotive functions.
This Part Fits the Following OEM/Substitute Numbers:
0 332 014 409, 0 332 019 453, 086 7513, 090 6180, 1 351 317, 1 353 789, 1 358 193, 43206400, 6 050 578, 6 059 235, 61 31 1 351 317, 61 31 1 353 789, 61 32 1 358 193, 611 004, 672 599, 672599-0, 75 613 114, 75 613 121...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Subaru Outback |
- Cut to Length, 2 1/2"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 8.25 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .5
- 13
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
06A121497AA, 06A121497E, 09551D100, 100799100C, 10378155, 12608670, 12787736, 140551FJ0A, 14055EW600, 15077095, 15077147, 15181119, 15257756, 15710551, 15727309, 15763280, 15763290, 15834774...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Subaru Impreza | H | 2458 | Pipe-1 To Pipe-2 | DOHC | GAS | 4 Cyl 2.5L | - |
- Cut to Length, 2 1/2"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 8.25 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .5
- 13
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Subaru Forester | H | 2458 | Water Housing To Pipe-1 | DOHC | GAS | 4 Cyl 2.5L | - |
- Cut to Length, 2 1/2"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 8.25 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .5
- 13
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Subaru Outback | H | 3000 | Oil Cooler To Pipe | GAS | 6 Cyl 3.0L | - |
- Cut to Length, 3"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Subaru Outback | H | 3000 | Engine To Pipe-1 | GAS | 6 Cyl 3.0L | - |
- Cut to Length, 3"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Subaru Tribeca | H | 3630 | Heater To Connector | GAS | 6 Cyl 3.6L | - |
- Back Seat Heater
- Back Seat Heater
- Product Attributes:
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Actual Color: Black
-
Features:
- Provides Instant Warmth And Air Circulation
- Swivel Mounted Bracket
- Compact 12V Heater Wires
- 300W Heater Warms Vehicle Quickly
- The Back Seat Heater provides instant warmth and air circulation to keep backseat passengers warm and cozy. The heater has a swivel mounted bracket, compact 12V heater wires and 300W heater to warm your vehicle quickly. There is a limited 1 year warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Subaru Outback |
Showing 1 - 10 of 31 products
Loading...