Image
Product
Price
- System Mounted Pressure Transducer
- System Mounted Pressure Transducer
- Pressure Switch
- Product Attributes:
- Item Included A Qty.: 1
- Comp Open/Closed: Variable
- Connector Gender: Female
- Fitting Thread Size: M10 X 1.25
- Harness Connector: 37235 / Harness Connector
- Meets / Exceeds OEM?: Yes
- Mnt Sys Loc: System Mounted
- Connector Shape: Round
- Item Included A Desc: 24606
- Description: Switch-pressure /system Mount
- Fitting Gender: Female
- Type: Transducer
- Material: Plastic / Metal
-
Features:
- Vehicle specific applications
- Color coded for easy identification
- Zinc coated to resist corrosion
- Contains gaskets, o-rings, or seals to properly replace the product
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
01458650, 11120915, 11120988, 13502758, 13502759, 13587668, 1550147, 1551258, 1551289, 1551342, 1551343, 1557, 155884, 1711513, 1PS1031, 207446, 207799, 20915...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Buick Enclave |
- Small I.D. Heater Hose
- Product Attributes:
- : .75
- Centerline Length: 16.50
- End 1 Inside Diameter: .75
- Type: Single
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - Buick Encore | Heater Inlet |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 180
- 7.1
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .59
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10242185, 11025, 12593464, 14155S, 15294018, 19025, 25862087, 63348, 63980, 63981, 71877, 8720904040, 872450C280, 872453D500, A71877, A90897, E92579, G922B48010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Buick Enclave | V | 3564 | Tee-2 To Thermostat | GAS | 6 Cyl 3.6L | 217 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .75
- 19
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10188065, 14052461, 14100796, 15225914, 15612113, 15664400, 15732305, 15782203, 15863393, 16199M, 1645476, 20781031, 20809018, 22537653, 22726953, 22757689, 25530817, 28475...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Buick Regal | L | 2384 | Reservoir To Thermostat | FLEX | 4 Cyl 2.4L | 145 |
- Cut to Length, 4 1/2"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Buick Encore | L | 1364 | Tee To Engine | GAS | 4 Cyl 1.4L | 83 |
- Cut to Length, 5"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Buick Enclave | V | 3564 | Heater To Tee-1 | GAS | 6 Cyl 3.6L | 217 |
- with Vehicle Built with Sitronic Stamping P/N 22811003 (1st Design)
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Buick Enclave |
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Buick Verano |
- Engine Heater Hose Assembly
- Product Attributes:
- Diámetro exterior del extremo de la manguera (2) (in): 1.14 In.
- Grade Type: Regular
- Contains Spring:
- No
- Non
- Maximum Bend Angle: 90
- End 1 Type:
- Desconexión Rápida
- Quick Disconnect
- Hose Outside Diameter:
- 1.14 In
- 1.14 In.
- End 1 Attachment Type:
- Conexión Rápida
- Quick Connect
- End 2 Inside Diameter: 1.02
- Clamps Included:
- Oui
- Sí
- Yes
- Inside Diameter:
- 1.02 In
- 1.02 In.
- Burst Pressure: 140
- End 2 Type:
- Hose
- Manguera
- Hose End (1) Outside Diameter (In):
- 1.14 In
- 1.14 In.
- Branch Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Color:
- Black
- Negro
- Noir
- Hose Attachment End 2: Hose
- Hose Attachment End 1: Quick Disconnect
- Maximum Working Pressure: 140
- Hose Shape:
- Ensamble Moldeado
- Molded Assembly
- Material: Epdm
- End 3 Inside Diameter: 1.02
- Extremo de fijación 2 de la manguera: Manguera
- Diámetro exterior del extremo de la manguera (1) (in): 1.14 In.
- Extremo de fijación 1 de la manguera: Desconexión Rápida
- Hose Material: Epdm
- Protective Sleeve Attached:
- No
- Non
- Coolant Hose Type:
- Di Simple (diámetro Interior)
- Single I.d. (inside Diameter)
- End 2 Attachment Type:
- Hose
- Manguera
- Longitud total de la manguera (in): 14.63 In.
- Hose Overall Length (In):
- 14.63 In
- 14.63 In.
- Thermostatically Controlled:
- No
- Non
- Axis 1 Length: 14.6
- Coolant Hose Heat Shield Included:
- No
- Non
- Centerline Length: 14.6
- Contenidos del paquete: 1 Ensamble De Manguera Del Calentador
- End 1 Inside Diameter: 1.02
- Hose End (2) Outside Diameter (In):
- 1.14 In
- 1.14 In.
-
Features:
- Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
- This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
This Part Fits the Following OEM/Substitute Numbers:
23428275, 24160
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Buick Regal | L | 1998 | Inlet | 4 Cyl 2.0L | 122 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Buick LaCrosse | V | 3564 | Pipe To Engine | FLEX | 6 Cyl 3.6L | 217 |
Showing 1 - 10 of 32 products
Loading...