Shop By Product Matching "ICON Vehicle Dynamics"
Image
Product
Price
- Front Raise Height 2.5 (in) Rear Raise Height 2.5 (in)
- 2018-UP JEEP JL 2.5" LIFT STAGE 1 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Jeep Wrangler | Front and Rear |
- Front Raise Height 2.5 (in) Rear Raise Height 2.5 (in)
- 2018-UP JEEP JL 2.5" LIFT STAGE 2 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stocK
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Jeep Wrangler | Front and Rear |
- Front Raise Height 3.0 (in) Rear Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Use with Track Bar 22027 & 22028 ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle.
- 2018-UP JEEP JL 2.5" LIFT STAGE 1 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2019 - Jeep Wrangler | Front and Rear | GAS | Sport S |
- Front Raise Height 3.0 (in) Rear Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Use with Track Bar 22027 & 22028 ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- 2018-UP JEEP JL 2.5" LIFT STAGE 1 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2019 - Jeep Wrangler | Front and Rear | GAS | Sport |
- Front Raise Height 3.0 (in) Rear Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Use with Track Bar 22027 & 22028 ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle.
- 2018-UP JEEP JL 2.5" LIFT STAGE 2 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stocK
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2019 - Jeep Wrangler | Front and Rear | Rubicon Deluxe |
- Front Raise Height 3.0 (in) Rear Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Use with Track Bar 22027 & 22028 ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- 2018-UP JEEP JL 2.5" LIFT STAGE 2 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stocK
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2019 - Jeep Wrangler | Front and Rear | GAS | Sport |
- Front Raise Height 3.0 (in) Rear Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Use with Track Bar 22027 & 22028 ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle.
- 2018-UP JEEP JL 2.5" LIFT STAGE 1 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2019 - Jeep Wrangler | Front and Rear | Rubicon Deluxe |
- Front Raise Height 3.0 (in) Rear Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Use with Track Bar 22027 & 22028 ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle.
- 2018-UP JEEP JL 2.5" LIFT STAGE 2 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stocK
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2019 - Jeep Wrangler | Front and Rear | GAS | Sport |
- Front Raise Height 3.0 (in) Rear Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Use with Track Bar 22027 & 22028 ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset
- 2018-UP JEEP JL 2.5" LIFT STAGE 1 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2019 - Jeep Wrangler | Front and Rear | Rubicon Deluxe |
- Front Raise Height 2.5 (in) Rear Raise Height 2.5 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Use with Track Bar 22027 & 22028 ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset
- 2018-UP JEEP JL 2.5" LIFT STAGE 1 SUSPENSION SYSTEM
- 18-UP JEEP JL 2.5" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Bump Stop Spacer Kit Part # 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 2.5
- Coil Spring End 2 Type: Open
- Coil Spring End 1 Type: Open
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
- 3" front, 2" rear increase in wheel travel
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2019 - Jeep Wrangler | Front and Rear | GAS | Unlimited Rubicon |
Showing 1 - 10 of 50 products
Loading...