Shop By Product Matching "K&N"
Choose a Model for your 1957 Mercury
Image
Product
Price
- w/o A.C.
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1144.78
- 45.07
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1130.30
- 44.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
10019362, 10024880, 10A1130, 11365, 11A1130, 123, 13-446, 13444, 13445, 14029081, 14049250, 14072732, 14076346, 14079250, 141-0463, 141-1008, 15-445, 15-452...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1957 - Mercury Monterey | V | 6032 | Fan and Generator | 8 Cyl 6.0L | 368 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18
- 457
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0516434000, 083, 1117227, 1274494, 1326235, 132691, 1330591, 14-1606-2, 1453013, 1461200, 1462573, 1462574, 1465546, 1468737, 1469370, 1471289, 1471552, 1471603...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1957 - Mercury Voyager | V | 6032 | Upper | GAS | 8 Cyl 6.0L | 368 |
- Taper Bearing Set Includes Cup and Cone
This Part Fits the Following OEM/Substitute Numbers:
0009811681KZ, 009311213, 010311213, 010409608, 0327382, 0327382-8, 06319792, 0635 501 008, 102842A, 10A7330, 1121086, 155401, 15A10664, 1615340, 1619687, 1619700, 1671469, 1716-147...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1957 - Mercury Commuter | Front Inner |
- Sedan Body Taper Bearing Set Includes Cup and Cone
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1957 - Mercury Medalist | Front Inner |
- W/Rotor Type P.S.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1031
- 40.62
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 1016
- 40
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0049972092, 0059977192, 0070101, 008554, 0109700, 0110038, 0197811004, 0200066, 027016441, 027023887, 03-02-085-1, 031105091, 031106721, 0351452716, 035145271C, 035145271E, 035145271F, 0401403...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1957 - Mercury Colony Park | V | 5114 | Power Steering | GAS | 8 Cyl 5.1L | 312 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1362
- 53.61
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 1346
- 53
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00013600016, 0019975892, 0029974492, 0035627900, 0035649490, 0036796100, 0039970392, 0049973392, 0049977892, 0049977992, 0059972092, 0070111, 0071802899, 007217, 007233, 0099976592, 0109800, 0110051...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1957 - Mercury Turnpike Cruiser | V | 6032 | Fan, Generator and Air Conditioning | GAS | 8 Cyl 6.0L | 368 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1957 - Mercury Montclair | V | 5114 | United States | 8 Cyl 5.1L | 312 |
- Oil Filter
- H-5.7 in.; OD-3.65 in.; 3/4 In. - 16UNF-2B Thread; psi Relief Valve 8-11 Pro-Series Oil Filter w/o Wrench Off Nut
- K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- High Flow Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 1.300 Lbs. (0.6 Kg)
- Product Box Height: 5.700 In. (145mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.810 In. (97 Mm)
- Package Material: Paperboard
- Product Box Length: 3.810 In. (97mm)
- PSI Relief Valve: 8-11
- Removal Nut: No
- Item Height: 5.719 In. (145mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
- K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
This Part Fits the Following OEM/Substitute Numbers:
122P193, 41515, 51515, 51525, 51545, 51622, 51775, AFL1, FL1A, FL1HP, FL281, HD222, HP1, HP3001, L30001, L30119, L30257, L30341...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1957 - Mercury Monterey | V | 5114 | 8 Cyl 5.1L | 312 |
- Fuel Filter
- OD 1.688 in.; 3.813 in.; 5/16 Barbed Inlet/Outlet In-line Filter~Fuel Filter
- K/N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements.
- In-Line Gas Filter
- Product Attributes:
- Filter Material: Cellulose Media
- Automotive Item Grade: High Performance
- Product Box Width: 3.100 In. (79mm)
- Package Material: Paperboard
- Product Box Length: 3.200 In. (81mm)
- WARNING CA Proposition 65: No
- Fitting Type:
- 0.3125 In. Npt
- Not Applicable
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Package Type: Box
- Product Box Height: 5.000 In. (127mm)
-
Features:
- Superior Construction
- Low Restriction
- Large Capacity
- Outstanding Filtration
- K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1957 - Mercury Commuter | V | 6032 | 8 Cyl 6.0L | 368 |
- Fuel Filter
- OD 1.688 in.; 3.813 in.; 5/16 Barbed Inlet/Outlet
- K/N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements.
- In-Line Gas Filter
- Product Attributes:
- Filter Material: Cellulose Media
- Automotive Item Grade: High Performance
- Product Box Width: 3.100 In. (79mm)
- Package Material: Paperboard
- Product Box Length: 3.200 In. (81mm)
- WARNING CA Proposition 65: No
- Fitting Type:
- 0.3125 In. Npt
- Not Applicable
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Package Type: Box
- Product Box Height: 5.000 In. (127mm)
-
Features:
- Superior Construction
- Low Restriction
- Large Capacity
- Outstanding Filtration
- K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.
This Part Fits the Following OEM/Substitute Numbers:
0014773801, 0014773901, 022213470, 022213470A, 022213470B, 022213478, 0430124, 0450904004, 10034G1, 105483206102, 1130000, 1131700, 1139803, 1139815, 1200526, 120410, 120678, 13200250...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1957 - Mercury Voyager |
Showing 1 - 10 of 13 products
Loading...