Image
Product
Price
- Autolite AP3924 Platinum Spark Plug
- Gap .032 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.526
- 13.36
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | - |
- Autolite AP3924 Platinum Spark Plug
- Gap .032 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.526
- 13.36
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1148, 14 FGH-8 DPURX2, 14 FR-7 KPUV, 1W4312405AB, 2U7E12405BA, 3005, 3071, 3071S, 413F, 413FSM, 4202, 6111, 71, 8001, 8007, 9, AGSP32C, AGSP32F...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Toyota Pickup | V | 2959 | 6 Cyl 3.0L | - |
- Autolite APP3924 Double Platinum Spark Plug
- Gap .032 (in)
- Double Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.526
- 13.36
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
- The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
- Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
- The multi-rib insulator prevents flash-over.
- Autolite® Double Platinum spark plugs have a platinum-to-platinum design that decreases gap erosion, reduces misfires, and provides improved durability*, leading to longer service life. It provides superior performance over copper and platinum plugs primarily used in distributorless ignition system (DIS) engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
101 000 035 AH, 101 905 611 G, 101 905 615 A, 101 905 616, 101 905 631 A, 12 12 0 030 548, 12 12 0 037 607, 12 12 0 141 871, 12 12 1 435 955, 12 12 9 071 003, 1290, 14F-7DPURX2, 176-5295, 176-5300, 18817-11051, 18818-11051, 22401-AA650, 22401-AA65A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Toyota Pickup | V | 2959 | 6 Cyl 3.0L | - |
- Autolite APP3924 Double Platinum Spark Plug
- Gap .032 (in)
- Double Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.526
- 13.36
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
- The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
- Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
- The multi-rib insulator prevents flash-over.
- Autolite® Double Platinum spark plugs have a platinum-to-platinum design that decreases gap erosion, reduces misfires, and provides improved durability*, leading to longer service life. It provides superior performance over copper and platinum plugs primarily used in distributorless ignition system (DIS) engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | - |
- Greaseable with 3.219in Outside Snap Ring Dimension 1 Piece Driveshaft 1.062in Bearing Cap Diameter with Outside Snap Rings
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1989 - Toyota Pickup | Rear Driveshaft at Transmission | RWD |
- Universal Joint
- with Outside Snap Rings 1 Piece Driveshaft 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1989 - Toyota Pickup | Rear Driveshaft at Rear Axle | RWD |
- Universal Joint
- with Outside Snap Rings 1 Piece Driveshaft 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1989 - Toyota Pickup | Rear Driveshaft at Transmission | RWD |
- Greaseable with 3.219in Outside Snap Ring Dimension 1 Piece Driveshaft 1.062in Bearing Cap Diameter with Outside Snap Rings
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1989 - Toyota Pickup | Rear Driveshaft at Rear Axle | RWD |
- E3 Premium DiamondFIRE Power Automotive Spark Plug
- Product Attributes:
- Application Specific or Non-Application: Application Specific
- Electrode Core: Copper
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Part Type Name: Automotive Spark Plug
- Hex Size: 5/8
- Reach:
- 19.05
- 3/4
- Center Electrode Tip Material: Nickel
- Resistor: Resistor
- Bullet:
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- e3 Spark Plugs Are Pre-gapped At The Factory To Meet O.e. Requirements
- Efficiency - E3 "diamond Shaped" Side Wire Electrode Projects The Combustion Spark In A Way That More Quickly Ignites The Air/fuel Mixture, Thereby Creating A Significantly Faster And Longer Flame Kernel, More Fuel Is Put To Work With Less Waste; Creating
- Energy - Power Output Improved By 6% On Average In The Typical Operating Ranges-results Will Vary
- Smoother Acceleration & Idle - The Faster Flame Initiated By The E3 Spark Plug Results In A More Complete Burn Of The Ingested Fuel Charge. More Pressure Is Created Against The Piston More Fuel Is Put To Work
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- Spark Plug Approximate Resistor Value: 3500-7000
- Gap: Pre-gapped At The Factory To Meet O.e. Requirements; Gap Cannot Be Adjusted
- Pre-Gap Size:
- .040
- 1.016
- Electrode Tip: Nickel
- Insulator Height:
- 2.023
- 51.37
- Brand Name: E3 Spark Plugs
- Features & Benefits: E3 Spark Plugs Are The Product Of Years Of Fundamental Research In The Combustion Field. The Unique Patented Ground Electrode Configuration Increases The Amount Of Combustion Pressure Created During Each Power Stroke Of The Engine, Which Results In A Mar
- Seat Style: Gasket
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1041, 1148, 1266, 1269, 1273, 2089, 2097, 2215, 2249, 2251, 2288, 2330, 2341, 2355, 2372, 2441, 2684, 2687...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1989 - Toyota Cressida | L | 2954 | 6 Cyl 3.0L | Luxury | - |
- E3 Premium DiamondFIRE Power Automotive Spark Plug
- Product Attributes:
- Application Specific or Non-Application: Application Specific
- Electrode Core: Copper
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Part Type Name: Automotive Spark Plug
- Hex Size: 5/8
- Reach:
- 19.05
- 3/4
- Center Electrode Tip Material: Nickel
- Resistor: Resistor
- Bullet:
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- e3 Spark Plugs Are Pre-gapped At The Factory To Meet O.e. Requirements
- Efficiency - E3 "diamond Shaped" Side Wire Electrode Projects The Combustion Spark In A Way That More Quickly Ignites The Air/fuel Mixture, Thereby Creating A Significantly Faster And Longer Flame Kernel, More Fuel Is Put To Work With Less Waste; Creating
- Energy - Power Output Improved By 6% On Average In The Typical Operating Ranges-results Will Vary
- Smoother Acceleration & Idle - The Faster Flame Initiated By The E3 Spark Plug Results In A More Complete Burn Of The Ingested Fuel Charge. More Pressure Is Created Against The Piston More Fuel Is Put To Work
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- Spark Plug Approximate Resistor Value: 3500-7000
- Gap: Pre-gapped At The Factory To Meet O.e. Requirements; Gap Cannot Be Adjusted
- Pre-Gap Size:
- .040
- 1.016
- Electrode Tip: Nickel
- Insulator Height:
- 2.023
- 51.37
- Brand Name: E3 Spark Plugs
- Features & Benefits: E3 Spark Plugs Are The Product Of Years Of Fundamental Research In The Combustion Field. The Unique Patented Ground Electrode Configuration Increases The Amount Of Combustion Pressure Created During Each Power Stroke Of The Engine, Which Results In A Mar
- Seat Style: Gasket
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1989 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | DLX | - |
Showing 1 - 10 of 22 products
Loading...