Image
Product
Price
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 216
- 8.5
- End 1 Inside Diameter:
- .28
- 7
- Material: Epdm
- End 2 Inside Diameter:
- .28
- 7
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10100, 12804553, 1349380J00, 14008S, 18100, 19506P2A000, 19526P5AA10, 63338, 64226, 86824, B86824, F2G813282A, F2G813681, G60913681, G60913682, K80213682, KB6KP13681, KL0113682A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Mazda 626 | V | 2497 | Exhaust Gas Recirculation Valve To Thermostat | GAS | 6 Cyl 2.5L | - |
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2002 - Mazda B4000 | Front Driveshaft at Front Axle | 4WD |
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2002 - Mazda Tribute | Rear Driveshaft at Support Bearing | 4WD |
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2002 - Mazda Tribute | Rear Driveshaft at Rear Axle | 4WD |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2002 - Mazda Tribute | Rear Driveshaft at Rear Axle | 4WD |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2002 - Mazda B4000 | Front Driveshaft at Front Axle | 4WD |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2002 - Mazda Tribute | Rear Driveshaft at Support Bearing | 4WD |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 6.12 HP At 4498 RPM;CARB E.O. D-269-29
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Estimated Horse Power Gain: 6.12 Hp @ 4498 Rpm
- Replacement Filter: Rf-1037
- Item Weight: 9.500 Lbs. (4.3 Kg)
- Intake Pipe Inlet Length: 22.000 In. (559mm)
- RPM: 4498
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.000 In. (76mm)
- Intake Pipe Outlet Length: 22.000 In. (559mm)
- Clamp Quantity: 5
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.500 In. (165mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 3.000 In. (76mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Mazda B2300 |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 5.32 HP At 5095 RPM;CARB E.O. D-269-31
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 5.32 Hp @ 5095 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Rf-1048
- Item Weight: 10.900 Lbs. (4.9 Kg)
- RPM: 5095
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 5 Hp
- Intake Pipe Inlet Length: 20.000 In. (508mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 20.000 In. (508mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Mazda B4000 |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 5.32 HP At 5095 RPM;CARB E.O. D-269-31 77 Series - Metal Intake Kit For Truck or SUV; Polished
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 5.32 Hp @ 5095 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Rf-1048
- Item Weight: 10.900 Lbs. (4.9 Kg)
- RPM: 5095
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 5 Hp
- Intake Pipe Inlet Length: 20.000 In. (508mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 20.000 In. (508mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Mazda B4000 | V | - | 6 Cyl 4.0L | 245 |
Showing 1 - 10 of 23 products
Loading...